Tasmota Shelly1 Light over PIR on SW in and over Tasmota APP

[mischa-t]

Hello, im trying to build an Light for Outside. I allready managed to build it with a Shelly1 and and PIR which works good, i can control the Light over the PIR or over the Tasmota APP.
The problem that i have is that i want that when i switch the Light on over the app that the PIR has no input.
At this point when i seat outside and i switch on the light over the app or the pir the light goes out, can i make the app as a master switch over the shelly sw inut?

[barbudor]

May be you can elaborate a little more on how you make the PIR control the Shelly, what is your Tasmota configuration (Rules ? Switch mode ?) and what does that app is doing (Tasmota does NOT have an APP, only on web interface. Any "app" is not coming from here and we don't support it)

[mischa-t]

Sorry, i mean the Web Interface.
As a Parameter i use Shelly 1(46) and i have GPIO4 as relay1 and GPIO5 as Switch_n1.
When the Output of the PIR goes to GPIO5 it turns the light on.
{"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}

[barbudor]

So everytime you move in front of the PIR, the light goes ON, OFF, ON, OFF ?

[mischa-t]

I configured the Input of the Shelly1 as a button and not a switch. The PIR has a Timer, so as long as the PIR is active the Light is on.
The Priority should be the On/Off Switch in the Webinterface so that when i turn the light on over the interface it will not go on and off by movement.

[mischa-t]

Oh i have the following switchmode active:
SwitchMode1":0

[mischa-t]

So i managed to get it running with the following:

switchmode1 1
Setoption114 1

and 3 Rules:

Rule1
on Switch2#state=1 do backlog event checksunrise=%time%; event checksunset=%time% endon
on event#checksunrise<%sunrise% do power1 1 endon
on event#checksunset>%sunset% do power1 1 endon
Rule2
on switch2#state do backlog power2 %value%; power1 1; ruletimer1 60 endon on rules#timer=1 do power1 0 endon
Rule3
on power3#state=1 do backlog power1 1; rule1 0, rule2 0 endon
on power3#state=0 do backlog power1 0; rule1 1, rule2 1 endon

Rules 1,2 & 3 are set to on.

At this point when the PIR (output 220V on SW in from Shelly1) the Light goes on for 60 seconds (acc to Rule 2).
When Webswitch3 is pressed the light goes on and Rules 1 & 2 are set inoperativ.

These 2 things work, i only have a problem with Rule1 that the PIR is only active before sunrise and after sunset.

Does anybody know what i am doing wrong?

[sfromis]

Note that the daylight time calculations are not trying to adjust for altitude variations (small factor), or landscape features (like high terrain near lower), which can move when there can be line-of-sight to the sun. And north of the polar circle, it will not work all year around.

[mischa-t]

So it seams to work now, i adjusted rule1 again. The light stays of when the PIR acitvated. I just have to check it after sunset if it works.
I just dont understand the numbers and data in the CMD line like sunset and sunrise "Number".
I copied the consol data:

10:17:21.762 RUL: SWITCH2#STATE=1 performs "backlog event checksunrise=617; event checksunset=617"
10:17:21.765 SRC: Rule
10:17:21.767 CMD: Grp 0, Cmd 'BACKLOG', Idx 1, Len 45, Pld -99, Data 'event checksunrise=617; event checksunset=617'
10:17:21.789 RSL: RESULT = {"Switch2":{"Action":"ON"}}
10:17:21.811 SRC: Backlog
10:17:21.814 CMD: Grp 0, Cmd 'EVENT', Idx 1, Len 16, Pld -99, Data 'checksunrise=617'
10:17:21.818 RSL: RESULT = {"Event":"Done"}
10:17:22.063 SRC: Backlog
10:17:22.066 CMD: Grp 0, Cmd 'EVENT', Idx 1, Len 15, Pld -99, Data 'checksunset=617'
10:17:22.070 RSL: RESULT = {"Event":"Done"}
10:17:57.342 RSL: RESULT = {"Switch2":{"Action":"OFF"}}

[sfromis]

The numbers are simply minutes past midnight, hours * 60 + minutes. Like when 10 hours and 17 minutes becomes 617.

[mischa-t]

i understand, quite easy.

[mischa-t]

Now everything seems to work, i readjusted the sunset/sunrise and combined the code. Thanks for the Help:

Rule1
on Switch2#state=1 do backlog event checksunrise=%time%; event checksunset=%time% endon
on event#checksunrise<%sunrise% do power1 1 endon
on event#checksunset>%sunset% do backlog power1 1; ruletimer1 120 endon
on rules#timer=1 do Power1 OFF endon

Rule2
on power3#state=1 do backlog rule1 0; power1 1 ENDON
on power3#state=0 do backlog rule1 1; power1 0 ENDON

[Noschvie]

@mischa-t thanks for sharing the rules. But how is the configuration of the device to reproduce your complete setup?
Thanks!

[mischa-t]

Hello Noschvie, as above. Its a shelly1 with a PIR (220V) output to the SW Input of the Shelly and a Lamp on the Output of the Shelly.


switchmode1 1
switchmode2 1
Setoption114 1

[mischa-t]

It seems to be that I was to early with my happiness, I thought it would work but there ist still a little flaw inside.
The thing with sunset and sunrise works but after sunset when movement is sensed the light goes on, this is ok. After 120s the light should go off but it doesn't. I can't find the fault in rule1.

[mischa-t]

I think i found the Problem why the Light does not go off after Midnight.
In the Rule 1 i added the following to event#checksunrise.

Rule1
on Switch2#state=1 do backlog event checksunrise=%time%; event checksunset=%time% endon
on event#checksunrise<%sunrise% do backlog power1 1; ruletimer1 120 endon
on event#checksunset>%sunset% do backlog power1 1; ruletimer1 120 endon

I'll check that after midnight.

[sfromis]

You can test that before midnight by issuing the Event commands manually, with any minute value to see what happens.

[mischa-t]

how do i issue the commands manually?

[sfromis]

Type them in the console, like Event checksunrise=1405
The same as in the rules, just that you can't use anything with % on the command line.

[mischa-t]

So, i managed to soll it,
on event#checksunrise<%sunrise% do backlog power1 1; ruletimer1 120 endon
on event#checksunset>%sunset% do backlog power1 1; ruletimer1 120 endon
in both events i need the ruletimer1, thats why it worked until 23:59 and after 00:01 it didnt.

Thank for the Help