Skip to content

ArchangeSDR 1.1.0

Choose a tag to compare

@bt0r bt0r released this 11 Nov 21:17
· 23 commits to main since this release

Highlights

  • Runs in real time on a Raspberry Pi 4 / ClockworkPi uConsole. The channel extraction is now done block by block (a mixer and two decimating filters) instead of an FFT of the whole capture, and the progressive listen only processes the new block. Measured on a uConsole (CM4): a 2.5 s listen went from 7.3 s to 1.1 s of processing, a 0.5 s recording block from 0.53 s to 0.2 s. Long recordings no longer drop samples.
  • Other receivers through SoapySDR (optional): HackRF, Airspy, SDRplay, LimeSDR, PlutoSDR… appear next to the RTL-SDR dongles once SoapySDR's Python module and the receiver's module are installed (Arch: soapysdr plus soapyhackrf, soapyairspy…; Debian / Ubuntu: python3-soapysdr plus soapysdr-module-…). The receiver must sample at 2.4 MS/s or more. Tested with a simulated SoapySDR so far: reports from real hardware are welcome.
  • Any sample rate: the detection keeps the same ~1.17 kHz resolution whatever the receiver's rate (Airspy R2 at 2.5 MS/s, Airspy Mini at 3 MS/s…). RTL-SDR dongles are unchanged (2.4 MS/s, same results).
  • archSDR: language and region follow the radio menu's settings and the system locale.

For contributors

  • python3 -m unittest: a test suite on synthetic signals and fake receivers (no dongle needed, numpy only), ready for a CI.
  • tools/bench.py: the processing cost of each scan step on your machine.

Update

cd ArchangeSDR
git pull
./install.sh

Then restart ArchangeSDR. Settings, ranges and history are kept.