Skip to content

Releases

0.3.0

Choose a tag to compare

@cc38324 cc38324 released this 09 Nov 04:05

0.3.0

  • 增加天线仿真与电源检查,修复部分 bug。

0.2.7 更新

Choose a tag to compare

@cc38324 cc38324 released this 04 Nov 11:07

0.2.7

  • 3D预览支持搜索元件、逐个隐藏和全部显示,可临时隐藏屏蔽盖。
  • 优化PCB板边与金属孔壁配色。
  • 补充走线转角、绕行、悬空线头和多余过孔检查。
  • 完善元件采购信息与3D模型核对。

0.2.6 — 多板预览、FPC生产文件与3D导航

Choose a tag to compare

@cc38324 cc38324 released this 02 Nov 08:55

0.2.6 — 2026-11-02

  • 同一嘉立创工程支持多个PCB、多个原理图。PCB / 3D / P1页签左侧的单个下拉选择主板、功放或电源,对应视图一起切换,保留当前查看模式;位号、网络和导出按文档隔离。
  • 多板项目保留所选PCB的移动、旋转、翻面、锁定、改线及撤销/重做。编辑过程中固定当前板,交还时只对该板重算铺铜。原理图逻辑编辑仍需对应设计文件,多板审核尚未实现。
  • FPC支持原生补强区域和自定义物理叠层。生产ZIP增加分材质/面别的补强Gerber和jlcpcb.json,覆盖PI、FR4、钢片、指定胶与电磁膜;订单仍须核对材料、厚度、面别和平台识别结果。
  • 3D支持中键或Shift加左键拖动平移、围绕局部观察目标旋转、鼠标位置缩放和双击全板复位。
  • 修复等长补偿的分层差分间距和写回保护,允许保存已缩小的原有长度差,同时报告剩余差值。增加多网络整束布线、指定电源脚去耦检查、只读孔位候选复核及可配置的项目布线质量门禁。
  • 公开skill同步上述流程、字段及命令参考,附八线整束示例,并保留完整MP157示例和本地元件库。
验证 本次结果
Windows x64 / macOS arm64 / Linux x64 各493项Rust测试通过、2项原有忽略;Flutter分析0问题、54项通过、1项可选联调跳过
最终完整包Demo 三平台逐脚差异0、5/5布通、电气DRC通过;保留6条原有字高警告
实际窗口 三平台PCB、原理图、3D截图已查看;GLB/STL导出通过
多板项目 Windows及macOS多板视图截图已查看;所选板编辑后其他PCB与全部原理图逐字节不变
FPC与等长 原生FPC样例14个区域、10个补强生产层及等长写回回归通过
八线整束示例 三平台最终包预览、整束写入、铺铜和电气DRC通过
安装与升级 Windows安装内容逐项与ZIP相同;Ubuntu22.04容器从0.2.5-1升级到0.2.6-1通过
MP157完整示例 三平台冷启动重建、显示/电源/逐脚检查与导出通过;电气铜、元件位置及位号身份一致
包内容 六个二进制附件及四个完整包的175个公开文档/示例资产核对通过

CLI、窗口和安装器来源为22a711602342f3009c4e98b3fd08a21a41ac55c6,包内公开文档固定到0c236f8fc9dedfbba8da262a0f14d18efe9e867d。SDK、实际验证、附件大小与SHA256见build-info.json和SHA256SUMS.txt。

Homebrew Formula已更新至本版macOS CLI的实际URL及SHA256。本次未同步APT和winget官方源,请使用Release附件。macOS包面向Apple芯片,Linux包面向amd64;Windows程序未签名,macOS未公证。FPC优惠由实际订单条件确定,文件导出成功不等于已获优惠;MP157实物点屏及装配限制继续见示例说明。

English

Version 0.2.6 adds multi-PCB/multi-schematic project selection through one selector beside the view tabs, editing of the selected PCB, native FPC stiffener production files, local 3D navigation and safer length tuning. It also includes multi-net bundle routing, power-pin decoupling checks and configurable project routing quality gates. The AI manual and examples are updated.

All three platforms passed 493 Rust tests (2 existing ignored), clean Flutter analysis and 54 Flutter tests (1 optional live test skipped). Final packages passed Demo connectivity/routing, actual PCB/schematic/3D windows, GLB/STL exports and eight-lane bundle routing. Windows installation matches its ZIP file for file; Linux upgrades from 0.2.5-1 in Ubuntu22.04. The complete MP157 example rebuilds and exports on all three platforms with matching electrical copper, component positions and reference identities. Multi-board native windows were reviewed on Windows and macOS; editing one PCB leaves the other PCBs and all schematics byte-identical. All 175 public documentation/example assets match across the four full packages.

Logical schematic edits still require a corresponding design file; multi-board review is not implemented. Check the factory's parsed FPC order parameters and actual discount conditions. macOS targets Apple silicon and Linux targets amd64. Homebrew is updated; APT and winget official sources are unchanged. See build-info.json and SHA256SUMS.txt for component sources and verification.

0.2.5 — STM32MP157 AMOLED / touch example

Choose a tag to compare

@cc38324 cc38324 released this 30 Oct 04:07

0.2.5 — 2026-10-30

将射频核心板开发中可复用的能力加入工具与AI手册:

  • em从原生PCB导出实际铜形、叠层与端口,--run调用另行安装的openEMS;窗口增加配置选择入口。求解完成、频带匹配、时间衰减和网格收敛分别记录,不把导出成功当作天线达标。
  • 设计文件支持实体铜形和开窗;保存布局、重新生成及局部改线保留盲埋孔的实际铜层跨度。邮票孔板边规则只适用于显式配置且符合几何条件的镀半孔。
  • 共用DRC空间索引,保留判定规则并稳定问题顺序;3D渲染与连续操作刷新优化保留几何、纹理、钻孔及遮挡。
  • skill补充裸核心板显隐、立创/厂家模型获取边界、表面CAD转换、安装面与方向核对,以及整份模型配方的来源保留。板尺寸、器件料号、网络和模型覆盖均留在工程数据中。
  • 完整包附30×20 mm四层原生天线流程示例。示例共用端口配置并校核生成几何,用户无需编译Rust即可导出模型。该示例尚未通过天线性能或网格收敛验收。
验证 本次结果
Windows / macOS arm64 / Linux x64 各421项Rust测试通过、2项原有忽略;Flutter分析0问题、31项测试通过
最终安装包Demo 三平台逐脚差异0、5/5布通、电气DRC通过;保留示例原有6条字高警告
实际窗口 三平台PCB、原理图、3D截图已查看;GLB/STL导出通过
安装与升级 Windows安装文件逐项与ZIP一致;Ubuntu 22.04容器从0.2.4-1升级到0.2.5-1通过
MP157完整示例 三平台冷启动重建、显示/电源/逐脚检查和导出通过;电气铜、元件位置及位号身份跨平台核对一致
电磁接口 三平台最终包均成功导出天线示例;Windows实际调用openEMS 0.37.0rc3完成流程冒烟测试,未确认时间及网格收敛,未配置匹配目标
裸板3D回归 71个可见元件、4个隐藏体,电气文件不变,效果图与先前版本逐字节一致
包内容 6个二进制附件及4个完整包中的169个公开文档/示例资产独立核对通过

CLI与窗口来源为d16d7e1e5edc0308682c650321a6a588c479d16c,安装器和可复用示例修正来源为615ae374dab1833a93bef2eadc77e00c6bb369e0;包内公开文档固定到06839b51ef6f79880e0a9df88e8b6756f1e4866e。具体版本、来源、验证及SHA256见附件build-info.json、SHA256SUMS.txt。

Homebrew Formula已更新到本版macOS CLI的真实URL及SHA256。本次未同步APT或winget官方源,使用Release附件安装。Windows包未签名,macOS包未公证。模型缺失或未完全匹配时继续标为近似;电气DRC及流程测试不代替装配、实物供电或射频验证。

English

This release adds a configurable PCB-to-openEMS workflow, design-file copper shapes and mask openings, blind/buried-via span preservation, explicit castellation rules, deterministic DRC indexing and faster interactive 3D rendering. The AI manual covers bare-core views, model provenance, surface-CAD conversion and mechanical alignment. Board-specific dimensions, nets, part choices and model overrides remain project data. A native four-layer antenna workflow example ships in every full package; openEMS and its matching Python dependencies are installed separately.

Each platform passed 421 Rust tests (2 existing ignored tests), clean Flutter analysis and 31 widget tests. Final Windows/macOS/Linux packages passed Demo connectivity/routing, actual PCB/schematic/3D windows, GLB/STL and EM export. Windows installation matches its ZIP file for file; Linux upgrades from 0.2.4-1 in Ubuntu 22.04. The complete MP157 example rebuilds and exports on all platforms, with matching physical copper/component records and reference identities. A Windows openEMS smoke run completed, with no matching target and no verified time or mesh convergence. The bare-core regression preserves the electrical files and produces a byte-identical image. All six binaries and 169 public documentation/example assets in each full package were checked.

See build-info.json for component sources and actual verification. Homebrew is updated; APT and winget official sources are unchanged by this release. Windows binaries are unsigned and macOS is not notarized. Approximate models and unvalidated antenna geometry retain their stated limits.

0.2.4 — STM32MP157 AMOLED / touch example

Choose a tag to compare

@cc38324 cc38324 released this 29 Oct 11:45

0.2.4 — 2026-10-29

完整 STM32MP157 AMOLED / 触摸示例随三平台完整包提供:AM319M262928ZS 一线 MIPI、CST3530 触摸、DF40 30 针座,附原始屏 PDF、1 脚方向说明、已布线布局、本地元件库和构建检查。显示与触摸供电芯片集中在 J6 附近,全板电源加粗,检查覆盖 34 个电源网络并贯穿焊盘和过孔。普通中段细颈为 0;按用户确认,仅保留 U5.N2 约 0.09 mm × 0.50 mm 的必要 BGA 短出线,维持 ST 核心器件位置和四层工艺。

本版还提供 holes 安装孔孔径同步、model3d 参数建模与绑定、pad-edit 下载封装铜面编辑、无焊盘机械件和散热器示例,以及不贴装/近似 3D 模型标记。新增封装局部坐标的 1 脚标记位置,修正差分端部颈缩导致宽主干被误拒绝的问题。所有新功能均按当前工程的数据与规则运行。

公开 skill、安装说明、参数模型/焊盘/散热器/变压器参考已同步。支持具备文件和命令工具的 AI 代理;完整包包含所需参考、例子和库,不限定模型。MP157 构建脚本需要 Python 3.11 或更新版本。

验证 本次结果
Windows / macOS arm64 / Linux x64 各 397 项 Rust 测试通过、2 项忽略;Flutter 分析 0 问题、30 项测试通过
三平台完整包 Demo 13 脚差异 0、5/5 布通、电气 DRC 0;保留原有 6 条字高警告
实际窗口 三平台 PCB、原理图、3D 截图已查看,未见运行异常;GLB / STL 导出通过
Windows 安装器 安装后的全部文件逐一与最终 ZIP 一致
Linux 升级 Ubuntu 22.04 独立容器验证 0.2.3-1 → 0.2.4-1
三平台 MP157 冷启动 289 器件、8 页、1262 接网脚差异 0;11 对差分、显示与电源专项通过,图纸和生产文件均导出
例子依赖 40 个本地元件清单引用完整,包含带 ℃ 字符的符号文件;原始 PDF 哈希一致
最终包内容 四个完整包的 163 个公开文档/示例文件逐项一致,无内部目录、地址、源码归档或凭据

CLI、窗口和 Windows 安装器来源为 f2515a3519e27e607a6cbf870f7a62429a0052fc,包内文档固定到公开提交 9e2fa5ffac7db099fb6ece12b21ad7c3d2a07844。SDK、附件大小与 SHA256 见 build-info.json 和 SHA256SUMS.txt。

跨平台比对确认电气铜、元件位置、引脚网络和约束一致;系统字体会影响常规丝印裁切和位号位置,库文档时间戳也受时区影响,不声称跨平台原始文件逐字节相同。MP157 尚未实物点屏,仍需 CO6300 初始化、CST3530 驱动、时序、负载、纹波、EMI 和射频验证;原有工艺提示保留在检查报告中。

Homebrew Formula 已更新到本版 CLI 的实际 URL 和 SHA256。本次未更新 APT 或 winget 官方源,安装使用 v0.2.4 Release 附件。Windows 包未签名,macOS 包未公证;近似 3D 模型不能用于机壳尺寸或碰撞验收。

English

The complete STM32MP157 AMOLED/touch example now ships with the Windows, Apple-silicon macOS and Linux full packages, including saved copper, a local library, the original panel PDF, connector pin-1 notes and build checks. Display supplies are near J6; ordinary intermediate power necks are zero across 34 checked nets, with only the approved U5.N2 BGA escape retained. ST core placement and the four-layer process are preserved.

This version also adds mounting-hole diameter synchronization, parametric 3D modelling/binding, downloaded-footprint pad editing, mechanical/heatsink examples and assembly-model flags, plus pin-1 and differential-neck fixes. The public AI manual and all referenced guides are synchronized. The MP157 helper requires Python 3.11 or newer.

Each platform passed 397 Rust tests (2 ignored), clean Flutter analysis and 30 widget tests. Final-package Demo, PCB/schematic/3D windows and GLB/STL checks passed. The Windows installer matches its ZIP file for file, and Linux upgrades from 0.2.3-1 in Ubuntu 22.04. The MP157 example rebuilt and exported successfully on all three platforms: 1262 connected pins match, 11 differential pairs pass, and display/power checks pass. All 40 local part manifests resolve, including Unicode library filenames, and all four full packages contain the same 163 public documentation/example files.

Electrical copper, component positions, pin assignments and constraints match across platforms; system fonts affect silkscreen/designator layout and library metadata timestamps can reflect the time zone. Raw native-file byte identity across platforms is not claimed. Physical display/touch operation and electrical prototype testing remain unverified. Homebrew is updated; APT/winget official sources are unchanged by this release. Windows binaries are unsigned and the macOS app is not notarized.

EasyEdaTool 0.2.3

Choose a tag to compare

@cc38324 cc38324 released this 28 Oct 09:39

0.2.3 — 2026-10-28

独立机械安装孔与槽孔现在真实挖穿3D板体正反面并生成孔壁;偏心通孔按钻孔中心定位,板体背面和孔壁使用一致向外的三角形方向。原先只处理焊盘孔与过孔,会把独立安装孔画成实心,这个问题已在共用几何层修复,PNG、GLB及Flutter预览一并生效。

新增二进制STL导出:render3d <工程> -o board.stl,Flutter 3D页也分别提供“导出 STL”和“导出 GLB”。STL坐标为毫米、z向上,不带颜色;导入CAD时选择毫米。GLB保留颜色和贴图,按glTF标准使用米和y向上。两种格式都保留同一份板体、安装孔和元件几何。元件模型仍可能是明确标注的外形估算,不能用估算件验收外壳尺寸。

合入PADS原生二进制.pcb导入:Windows通过本机已安装、已授权的PADS Layout,对私有副本执行官方ASCII导出后复用现有转换及自检;源文件不保存、不修改,也不接管已有PADS会话。非Windows或未安装授权PADS时使用已导出的.asc。同时修正METRIC导出混用英制/公制封装的尺寸;BASIC归一化数据保持原行为。

保留完整元件本体丝印、1脚/极性标记和避让约束。开发与发布使用主工作区,打包支持CARGO_TARGET_DIR;修复迁移构建缓存后的Windows安装器资源路径,以及缺少资源编译器时的备用UAC清单。

验证 本次结果
三平台Rust / Flutter 各380项Rust通过、2项忽略;Flutter分析0问题、30项测试通过,全部重建
最终包Demo 三平台13脚差异0、5/5布通、电气DRC 0;原有6条字高警告保留
实际窗口 三平台PCB、原理图、3D截图已查看,无运行异常;STL/GLB导出均通过
Windows安装 正常与无资源编译器两条路径都可安装,文件逐一与ZIP一致
Linux升级 独立Ubuntu 22.04容器验证0.2.2-1→0.2.3-1
实际模型 独立安装孔与NPTH钻孔吻合,STL/GLB孔位与毫米尺寸一致;预览接口与CLI输出逐字节一致
PADS真实文件 180器件、473焊盘、949过孔几何自检无差异,源文件哈希不变;所配参考DSN的原版15处网络差异按原样报告
包内文档 四个完整包的86个公开文档/示例文件逐项一致,无内部说明或地址

CLI与窗口来源均为c62d326daccdd371edd80adfff1bb854850e6f2f,Windows安装器来源770cc4dbfaee67ce9a2238ca01d105c8bf3373a2,包内文档固定到ecc370e31fd42027e42f0fb3b4a96c5fb2d36e4a。构建SDK、完整验证和六个二进制附件的SHA256见build-info.json与SHA256SUMS.txt。

下载:v0.2.3 Release。Homebrew Formula使用本版CLI真实URL和SHA256。APT本轮未同步,仍为0.2.1-1,本版使用Release的0.2.3-1 DEB。

winget官方源尚未找到Miyue.PcbCliTool:0.2.0收录申请 #452460 等待维护者批准。0.2.3清单引用最终Windows ZIP并通过本地格式验证;LocalManifestFiles未启用,未声称本地清单或官方源安装成功,未修改管理员设置。

English

Mechanical mounting holes and routed slots now cut both PCB faces with real walls in the shared PNG, GLB and Flutter geometry. Offset pad drills use their actual drill origin; bottom and wall triangles face outwards.

STL export is available from the CLI and Flutter viewer alongside GLB. STL contains geometry in millimetres, z-up, without colours; import as mm. GLB preserves materials and follows glTF metre/y-up conventions. Both share the same component and drilled-board geometry. Approximate models remain labelled and cannot validate enclosure dimensions.

Native PADS binary PCB import uses an installed, licensed Windows PADS Layout to export a private copy through official automation. Original files and existing PADS sessions remain untouched. Other platforms use exported ASCII. Mixed metric/imperial decal units are corrected without changing normalized BASIC exports.

Each platform passed 380 Rust tests (2 ignored), clean Flutter analysis and 30 widget tests. Final packages passed the Demo, both model formats and actual PCB/schematic/3D window checks. Windows normal and manifest-fallback installers match the ZIP file for file; Linux upgrades from 0.2.2-1 in an isolated Ubuntu 22.04 container. The reference PADS PCB geometry matches; its paired schematic retains 15 pre-existing net differences. The legacy Demo retains 6 text-height warnings.

Source commits are recorded above and in build-info.json. Winget still awaits maintainer approval; schema validation does not establish installation availability. APT remains 0.2.1-1. Windows/macOS packages are unsigned/unnotarized.

EasyEdaTool 0.2.2

Choose a tag to compare

@cc38324 cc38324 released this 28 Oct 07:30

0.2.2 — 2026-10-28

AI skill 将元件本体丝印完整性及避让作为交付约束:先列出全板元件及丝印清单,保留完整外框、芯片1脚和二极管/LED负极条。冲突通过移动/转向元件并重接线路解决,禁止删框、裁短或隐藏图层规避检查;交付核对DRC、实际顶底层Gerber与最新PCB预览。器件范围和参数均由项目设计/规则配置。

本版包含上次发布后的通用改进:整板3D PNG/GLB导出及Flutter 3D页签、模型与焊盘对齐、完整本体外框与方向标记检查、局部布局避让、机械安装孔、电源跨焊盘/过孔细颈检查、原生过孔身份保护、独立原理图文字更新、工程预览规则及可配置搜索预算。源代码未加入具体项目的固定坐标、板尺寸或网络参数。

验证 本次结果
Windows / macOS arm64 / Linux x64 Rust 各375项通过,2项忽略,0失败
三平台Flutter 分析0问题,各30项测试通过;均重新构建
最终包内Demo 三平台13脚差异0,5/5布通,电气DRC 0;示例原有6条字高警告保留
实际窗口 三平台PCB、原理图和3D均启动并实际查看截图,无运行异常
Windows安装 安装程序解出的全部文件与最终ZIP逐一一致
Linux升级 在独立Ubuntu 22.04容器验证0.2.1-1→0.2.2-1,依赖与动态库检查通过
丝印正反例 6个完整框、2个1脚标记、1条负极条,DRC错误/警告0;故意挤近电容时铜间距仍合格,但正确报告frame_clash;实际Gerber已查看
文档与产物 4个完整包内86个公开文档/示例文件逐项一致;CLI tar根目录正确;无内部说明、地址或源码归档

CLI与窗口来源均为 fcebccdb742707de65829384e59d2aff8ca3815d;包内文档固定到 637c433135322b7a3e1fbd0eeb673d86b98d8b06。Flutter 3.41.9 / Dart 3.11.5,锁文件不变;Rust为Windows/macOS 1.98.1、Linux 1.99.0。完整来源、测试和每个附件SHA256见Release附件 build-info.json、SHA256SUMS.txt。

Windows完整ZIP/安装程序、macOS arm64完整ZIP/CLI tar.gz、Linux amd64 DEB/完整tar.gz均在 v0.2.2 Release。Homebrew Formula已指向本版CLI及真实校验和。APT源本轮未同步,当前仍为0.2.1-1,安装本版请用Release的0.2.2-1 DEB。

winget官方源当前未查到 Miyue.PcbCliTool。0.2.0收录申请 #452460 已通过自动验证、仍待维护者批准。0.2.2清单已用本版ZIP真实SHA256通过本地格式验证;本机LocalManifestFiles未启用,本轮未声称本地或官方源安装通过,也未改变管理员设置。

限制:3D缺模型会明确显示外形估算,无模型碰撞检查;不能用估算外形验收机壳。电气DRC通过不代替丝印、方向、装配空间或实物电气验证。Windows安装包未签名,macOS包未公证。

English

The AI skill now requires complete component body silkscreen, pin-1 and polarity marks, and conflict-free placement. Inventory parts first; resolve clashes by moving or rotating parts and reconnecting copper, then inspect DRC, actual Gerbers and the latest preview. Do not delete or trim outlines to suppress findings. Dimensions and selection patterns remain project data.

This release adds the general 3D renderer and viewer tab, complete outline/orientation checks, placement clearance search, mounting holes, power-neck checks across pads/vias, native record preservation, independent schematic updates, project preview rules and configurable routing budgets.

Each platform passed 375 Rust tests (2 ignored), clean Flutter analysis and 30 widget tests. Final Windows/macOS/Linux packages passed the bundled Demo and actual PCB/schematic/3D window checks. Windows installation matches the ZIP file for file; Linux upgrades from 0.2.1-1 to 0.2.2-1 in an isolated Ubuntu 22.04 container. The dedicated silkscreen case preserves six complete frames, two pin-1 marks and one cathode bar with no errors or warnings; a deliberately crowded layout is detected even without a copper-clearance violation. The legacy Demo retains six existing text-height warnings.

Source and packaged-document commits are recorded above and in build-info.json. Homebrew uses the release's actual CLI SHA256. APT remains at 0.2.1-1; use the release DEB for 0.2.2. Winget's previous 0.2.0 submission still awaits maintainer approval; the new manifest passes schema validation, which does not establish installation or official availability. Models may be approximate, collision checking is not implemented, and the Windows/macOS packages remain unsigned/unnotarized.

EasyEdaTool 0.2.1

Choose a tag to compare

@cc38324 cc38324 released this 24 Oct 09:53

EasyEdaTool 0.2.1:通用布线整理、质量检查与预览改进。

  • 芯片和连接器两端的差分出线规划;等长补线支持限定铜层及区域。
  • 整网统一线宽、连续电源主干改道,改进短鼓包、细颈、偏心过孔及绕远检查。
  • 走线网络名、Ctrl 多网络高亮;保留真实线宽和孔口。
  • 修复直接打开原理图时,页清单尚未加载导致的窗口越界。
  • 同步中英文安装说明、AI 手册和命令参考;保留 MP157 资源,增加可复现的小板自测。

Windows ZIP / setup、macOS Apple 芯片完整 ZIP、Linux amd64 DEB / 完整 tar.gz 均带桌面预览。macOS tar.gz 为 Homebrew 使用的纯 CLI 包。

三个平台各通过 332 项 Rust 测试(2 项忽略)、27 项 Flutter 测试,静态分析 0 问题。最终包均已解包运行示例:5/5 连通,电气 DRC 0;示例原有 6 项丝印字高警告保留。PCB 和原理图均实际启动并核对截图。Linux 验证环境为 Ubuntu 22.04 / glibc 2.35,并验证从 0.2.0-2 升级到 0.2.1-1。

校验文件见 SHA256SUMS.txt,组件来源和测试记录见 build-info.json。详细变化与示例限制见发布记录,安装步骤见中文说明 / English。

English: General routing cleanup, via/width quality checks, net labels and multi-net highlighting, plus a schematic-startup fix. Full desktop packages are provided for Windows x64, macOS arm64 and Linux x64; the macOS tar.gz is CLI-only. All final packages passed extracted-demo and live-window checks. See the documentation and attached checksums/build record for details.

0.2.0

Choose a tag to compare

@cc38324 cc38324 released this 14 Oct 06:29

0.2.0

  • Windows:easyedatool-0.2.0-windows-x64.zip、easyedatool-0.2.0-windows-x64-setup.exe
  • macOS(Apple 芯片):easyedatool-0.2.0-macos-arm64.tar.gz(Homebrew)、easyedatool-0.2.0-macos-arm64.zip(带预览窗口)
  • Ubuntu 22.04+ / Debian 12+:easyedatool_0.2.0-1_amd64.deb
  • 鸿蒙电脑:这一版没有

安装命令见 README.md。