Skip to content

0.2.5 — STM32MP157 AMOLED / touch example

Choose a tag to compare

@cc38324 cc38324 released this 30 Oct 04:07

0.2.5 — 2026-10-30

将射频核心板开发中可复用的能力加入工具与AI手册:

  • em从原生PCB导出实际铜形、叠层与端口,--run调用另行安装的openEMS;窗口增加配置选择入口。求解完成、频带匹配、时间衰减和网格收敛分别记录,不把导出成功当作天线达标。
  • 设计文件支持实体铜形和开窗;保存布局、重新生成及局部改线保留盲埋孔的实际铜层跨度。邮票孔板边规则只适用于显式配置且符合几何条件的镀半孔。
  • 共用DRC空间索引,保留判定规则并稳定问题顺序;3D渲染与连续操作刷新优化保留几何、纹理、钻孔及遮挡。
  • skill补充裸核心板显隐、立创/厂家模型获取边界、表面CAD转换、安装面与方向核对,以及整份模型配方的来源保留。板尺寸、器件料号、网络和模型覆盖均留在工程数据中。
  • 完整包附30×20 mm四层原生天线流程示例。示例共用端口配置并校核生成几何,用户无需编译Rust即可导出模型。该示例尚未通过天线性能或网格收敛验收。
验证 本次结果
Windows / macOS arm64 / Linux x64 各421项Rust测试通过、2项原有忽略;Flutter分析0问题、31项测试通过
最终安装包Demo 三平台逐脚差异0、5/5布通、电气DRC通过;保留示例原有6条字高警告
实际窗口 三平台PCB、原理图、3D截图已查看;GLB/STL导出通过
安装与升级 Windows安装文件逐项与ZIP一致;Ubuntu 22.04容器从0.2.4-1升级到0.2.5-1通过
MP157完整示例 三平台冷启动重建、显示/电源/逐脚检查和导出通过;电气铜、元件位置及位号身份跨平台核对一致
电磁接口 三平台最终包均成功导出天线示例;Windows实际调用openEMS 0.37.0rc3完成流程冒烟测试,未确认时间及网格收敛,未配置匹配目标
裸板3D回归 71个可见元件、4个隐藏体,电气文件不变,效果图与先前版本逐字节一致
包内容 6个二进制附件及4个完整包中的169个公开文档/示例资产独立核对通过

CLI与窗口来源为d16d7e1e5edc0308682c650321a6a588c479d16c,安装器和可复用示例修正来源为615ae374dab1833a93bef2eadc77e00c6bb369e0;包内公开文档固定到06839b51ef6f79880e0a9df88e8b6756f1e4866e。具体版本、来源、验证及SHA256见附件build-info.json、SHA256SUMS.txt。

Homebrew Formula已更新到本版macOS CLI的真实URL及SHA256。本次未同步APT或winget官方源,使用Release附件安装。Windows包未签名,macOS包未公证。模型缺失或未完全匹配时继续标为近似;电气DRC及流程测试不代替装配、实物供电或射频验证。

English

This release adds a configurable PCB-to-openEMS workflow, design-file copper shapes and mask openings, blind/buried-via span preservation, explicit castellation rules, deterministic DRC indexing and faster interactive 3D rendering. The AI manual covers bare-core views, model provenance, surface-CAD conversion and mechanical alignment. Board-specific dimensions, nets, part choices and model overrides remain project data. A native four-layer antenna workflow example ships in every full package; openEMS and its matching Python dependencies are installed separately.

Each platform passed 421 Rust tests (2 existing ignored tests), clean Flutter analysis and 31 widget tests. Final Windows/macOS/Linux packages passed Demo connectivity/routing, actual PCB/schematic/3D windows, GLB/STL and EM export. Windows installation matches its ZIP file for file; Linux upgrades from 0.2.4-1 in Ubuntu 22.04. The complete MP157 example rebuilds and exports on all platforms, with matching physical copper/component records and reference identities. A Windows openEMS smoke run completed, with no matching target and no verified time or mesh convergence. The bare-core regression preserves the electrical files and produces a byte-identical image. All six binaries and 169 public documentation/example assets in each full package were checked.

See build-info.json for component sources and actual verification. Homebrew is updated; APT and winget official sources are unchanged by this release. Windows binaries are unsigned and macOS is not notarized. Approximate models and unvalidated antenna geometry retain their stated limits.