Webworkflow code editor not working

[casainho]

CircuitPython Version

Adafruit CircuitPython 8.1.0-beta.2, ESP32-S3-DevKitC-1-N8R2 board.

Workflow(s)

WEB

Browser(s)

Firefox and Chrome, Linux, Android and MAC.

Console Log

No response

Steps

http://cpy-2b4f34.local/code/ don't load the code editor. Some weeks ago it was working perfectly for me.

Description

When the code page opens, I quickly see the following string: "Unable to connect. The device [local IP address] was not found. Be sure it is plugged in and set up properly."
Then I see this:

I erased and flashed a few times the CircuitPython binary.

I tested to change the CIRCUITPY_WEB_API_PORT.

I tested in two different ESP32-S3 as also in one ESP32-S2, that always worked well for me.

I also tested on a different wifi network, with only my PC and the ESP32-S3 board.

Tested on 2 different Linux Ubuntu computers, on one Android Phone and on one MAC.

Additional information

See adafruit/circuitpython#7929

[makermelissa]

This was likely caused by #77. I'll take a look at it.

[makermelissa]

I updated your issue submission above with the info from the issue you linked to.

[makermelissa]

Ok, I was able to reproduce the issue. Coincidentally, the only board I was able to find happened to be the same one you have. I'm almost certain I was correct about the cause of the issue now.

[makermelissa]

Here's the console output:

index.css:1     Failed to load resource: the server responded with a status of 404 (Not Found)
loading-blinka.webp:1     Failed to load resource: the server responded with a status of 404 (Not Found)
index.js:1     Failed to load resource: the server responded with a status of 404 (Not Found)
index.css:1     Failed to load resource: the server responded with a status of 404 (Not Found)

[makermelissa]

Fixed by #91.

[casainho]

Works as expected, thank you!! 👍 🥳