You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
A light set to 15 % stays at 15 %. Some fixtures keep only whole percent and cut the rest off: Home Assistant's 15 % went out as 14.9 %, the fixture kept 14, and the slider sprang back (#11). The box now learns this from the fixture's own reply. The first time a reply comes back cut to a whole percent, the box marks that fixture, re-sends the whole percent Home Assistant shows, and sends whole percents to it from then on, so the 14 is never shown. Nothing is stored (it is relearned after a restart, on the first command) and nothing is probed (only commands someone actually sent). The lowest slider step goes to such a fixture as 1 % instead of 0.4 %, which it would have kept as 0. Fixtures that keep fractions are sent exactly what they were sent before. Proved on the dev board with a P60c: 14.9 % asked, 15 % read back and held, with the log line fixture 0 keeps whole percent only.