[pull] dev from home-assistant:dev

homeassistant/components/anthemav/strings.json

@@ -10,7 +10,7 @@
     },
     "error": {
       "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
-      "cannot_receive_deviceinfo": "Failed to retrieve MAC Address. Make sure the device is turned on"
+      "cannot_receive_deviceinfo": "Failed to retrieve MAC address. Make sure the device is turned on"
     },
     "abort": {
       "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"

homeassistant/components/devolo_home_network/strings.json

@@ -105,7 +105,7 @@
       "message": "Device {title} did not respond"
     },
     "password_protected": {
-      "message": "Device {title} requires re-authenticatication to set or change the password"
+      "message": "Device {title} requires re-authentication to set or change the password"
     },
     "password_wrong": {
       "message": "The used password is wrong"

homeassistant/components/fritz/strings.json

@@ -214,7 +214,7 @@
       "message": "Unable to establish a connection"
     },
     "update_failed": {
-      "message": "Error while uptaing the data: {error}"
+      "message": "Error while updating the data: {error}"
     }
   }
 }

homeassistant/components/google_travel_time/strings.json

@@ -3,7 +3,7 @@
   "config": {
     "step": {
       "user": {
-        "description": "You can specify the origin and destination in the form of an address, latitude/longitude coordinates or an entity ID that provides this information in its state, an entity ID with latitude and longitude attributes, or zone friendly name (case sensitive)",
+        "description": "You can specify the origin and destination in the form of an address, latitude/longitude coordinates or an entity ID that provides this information in its state, an entity ID with latitude and longitude attributes, or a zone's friendly name (case-sensitive)",
         "data": {
           "name": "[%key:common::config_flow::data::name%]",
           "api_key": "[%key:common::config_flow::data::api_key%]",

homeassistant/components/imgw_pib/manifest.json

@@ -6,5 +6,5 @@
   "documentation": "https://www.home-assistant.io/integrations/imgw_pib",
   "iot_class": "cloud_polling",
   "quality_scale": "silver",
-  "requirements": ["imgw_pib==1.4.2"]
+  "requirements": ["imgw_pib==1.5.0"]
 }

homeassistant/components/immich/manifest.json

@@ -8,5 +8,5 @@
   "iot_class": "local_polling",
   "loggers": ["aioimmich"],
   "quality_scale": "silver",
-  "requirements": ["aioimmich==0.11.0"]
+  "requirements": ["aioimmich==0.11.1"]
 }

homeassistant/components/knx/manifest.json

@@ -13,7 +13,7 @@
   "requirements": [
     "xknx==3.8.0",
     "xknxproject==3.8.2",
-    "knx-frontend==2025.6.13.181749"
+    "knx-frontend==2025.7.23.50952"
   ],
   "single_config_entry": true
 }

homeassistant/components/lametric/strings.json

@@ -2,7 +2,7 @@
   "config": {
     "step": {
       "choice_enter_manual_or_fetch_cloud": {
-        "description": "A LaMetric device can be set up in Home Assistant in two different ways.\n\nYou can enter all device information and API tokens yourself, or Home Asssistant can import them from your LaMetric.com account.",
+        "description": "A LaMetric device can be set up in Home Assistant in two different ways.\n\nYou can enter all device information and API tokens yourself, or Home Assistant can import them from your LaMetric.com account.",
         "menu_options": {
           "pick_implementation": "Import from LaMetric.com (recommended)",
           "manual_entry": "Enter manually"

homeassistant/components/laundrify/strings.json

@@ -9,7 +9,7 @@
   "config": {
     "step": {
       "init": {
-        "description": "Please enter your personal Auth Code that is shown in the laundrify-App.",
+        "description": "Please enter your personal Auth Code that is shown in the laundrify app.",
         "data": {
           "code": "Auth Code (xxx-xxx)"
         }

homeassistant/components/matter/cover.py

@@ -31,8 +31,14 @@
 
 # map Matter window cover types to HA device class
 TYPE_MAP = {
+    clusters.WindowCovering.Enums.Type.kRollerShade: CoverDeviceClass.SHADE,
+    clusters.WindowCovering.Enums.Type.kRollerShade2Motor: CoverDeviceClass.SHADE,
+    clusters.WindowCovering.Enums.Type.kRollerShadeExterior: CoverDeviceClass.SHADE,
+    clusters.WindowCovering.Enums.Type.kRollerShadeExterior2Motor: CoverDeviceClass.SHADE,
     clusters.WindowCovering.Enums.Type.kAwning: CoverDeviceClass.AWNING,
     clusters.WindowCovering.Enums.Type.kDrapery: CoverDeviceClass.CURTAIN,
+    clusters.WindowCovering.Enums.Type.kTiltBlindTiltOnly: CoverDeviceClass.BLIND,
+    clusters.WindowCovering.Enums.Type.kTiltBlindLiftAndTilt: CoverDeviceClass.BLIND,
 }
 
 

homeassistant/components/tellduslive/strings.json

@@ -11,8 +11,8 @@
     },
     "step": {
       "auth": {
-        "description": "To link your TelldusLive account:\n1. Open the link below\n2. Log in to Telldus Live\n3. Authorize **{app_name}** (select **Yes**).\n4. Come back here and select **Submit**.\n\n [Link TelldusLive account]({auth_url})",
-        "title": "Authenticate with TelldusLive"
+        "description": "To link your Telldus Live account:\n1. Open the link below\n2. Log in to Telldus Live\n3. Authorize **{app_name}** (select **Yes**).\n4. Come back here and select **Submit**.\n\n[Link Telldus Live account]({auth_url})",
+        "title": "Authenticate with Telldus Live"
       },
       "user": {
         "data": {

homeassistant/components/zwave_js/strings.json

@@ -274,7 +274,7 @@
         },
         "step": {
           "init": {
-            "description": "The device configuration file for {device_name} has changed.\n\nZ-Wave discovers a lot of device metadata by interviewing the device. However, some of the information has to be loaded from a configuration file. Some of this information is only evaluated once, during the device interview.\n\nWhen a device config file is updated, this information may be stale and and the device must be re-interviewed to pick up the changes.\n\n This is not a required operation and device functionality will be impacted during the re-interview process, but you may see improvements for your device once it is complete.\n\nIf you decide to proceed with the re-interview, it will take place in the background.\n\nNote: Battery powered sleeping devices need to be woken up during re-interview for it to work. How to wake up the device is device specific and is normally explained in the device manual.",
+            "description": "The device configuration file for {device_name} has changed.\n\nZ-Wave discovers a lot of device metadata by interviewing the device. However, some of the information has to be loaded from a configuration file. Some of this information is only evaluated once, during the device interview.\n\nWhen a device config file is updated, this information may be stale and the device must be re-interviewed to pick up the changes.\n\nThis is not a required operation and device functionality will be impacted during the re-interview process, but you may see improvements for your device once it is complete.\n\nIf you decide to proceed with the re-interview, it will take place in the background.\n\nNote: Battery-powered sleeping devices need to be woken up during re-interview for it to work. How to wake up the device is device-specific and is normally explained in the device manual.",
             "menu_options": {
               "confirm": "Re-interview device",
               "ignore": "Ignore device config update"

tests/components/fritz/test_sensor.py

@@ -57,7 +57,7 @@ async def test_sensor_update_fail(
     async_fire_time_changed(hass, dt_util.utcnow() + timedelta(seconds=300))
     await hass.async_block_till_done(wait_background_tasks=True)
 
-    assert "Error while uptaing the data: Boom" in caplog.text
+    assert "Error while updating the data: Boom" in caplog.text
 
     sensors = hass.states.async_all(SENSOR_DOMAIN)
     for sensor in sensors:

tests/components/matter/snapshots/test_cover.ambr

@@ -124,7 +124,7 @@
     'name': None,
     'options': dict({
     }),
-    'original_device_class': <CoverDeviceClass.AWNING: 'awning'>,
+    'original_device_class': <CoverDeviceClass.SHADE: 'shade'>,
     'original_icon': None,
     'original_name': None,
     'platform': 'matter',
@@ -140,7 +140,7 @@
   StateSnapshot({
     'attributes': ReadOnlyDict({
       'current_position': 51,
-      'device_class': 'awning',
+      'device_class': 'shade',
       'friendly_name': 'Longan link WNCV DA01',
       'supported_features': <CoverEntityFeature: 15>,
     }),
@@ -175,7 +175,7 @@
     'name': None,
     'options': dict({
     }),
-    'original_device_class': <CoverDeviceClass.AWNING: 'awning'>,
+    'original_device_class': <CoverDeviceClass.BLIND: 'blind'>,
     'original_icon': None,
     'original_name': None,
     'platform': 'matter',
@@ -191,7 +191,7 @@
   StateSnapshot({
     'attributes': ReadOnlyDict({
       'current_tilt_position': 100,
-      'device_class': 'awning',
+      'device_class': 'blind',
       'friendly_name': 'Mock PA Tilt Window Covering',
       'supported_features': <CoverEntityFeature: 139>,
     }),
@@ -226,7 +226,7 @@
     'name': None,
     'options': dict({
     }),
-    'original_device_class': <CoverDeviceClass.AWNING: 'awning'>,
+    'original_device_class': <CoverDeviceClass.BLIND: 'blind'>,
     'original_icon': None,
     'original_name': None,
     'platform': 'matter',
@@ -241,7 +241,7 @@
 # name: test_covers[window_covering_tilt][cover.mock_tilt_window_covering-state]
   StateSnapshot({
     'attributes': ReadOnlyDict({
-      'device_class': 'awning',
+      'device_class': 'blind',
       'friendly_name': 'Mock Tilt Window Covering',
       'supported_features': <CoverEntityFeature: 139>,
     }),