Skip to content

Selecting and Shaping

codingncaffeine edited this page Oct 15, 2026 · 4 revisions

Selecting and Shaping

Quick ways to pick many things at once, copy a look from one thing to another, and tidy shapes. Most of these are also in the command palette (Ctrl+K).

Select many

  • Ctrl+A selects everything. When the Select tool picks one kind only (corners, walls, rooms or objects), it selects every one of that kind.
  • Ctrl+I selects the rest of the kinds you had selected instead.
  • Ctrl+L brings back the selection before the last one you replaced or cleared. Press it again to swap back.
  • A box drawn with the Select tool over empty space selects what is inside it. Shift adds what is inside to the selection, Ctrl takes it away, and Ctrl+Shift keeps only what is both selected and inside.

Locked rooms and objects are left out.

The arrow keys move what is selected a grid step (Shift: one unit). The presses of one run are one undo step; a pause, a click or any other key ends the run. With the Doom Builder keys, use Ctrl and an arrow.

Select alike

In the Inspector, under the heading LIKE THIS ONE, and in the command palette, WadSmith can select everything that matches what you have selected.

For rooms:

  • Same floor picture
  • Same ceiling picture
  • Same floor height
  • Same ceiling height
  • Same brightness
  • Joined, same floor height - the rooms reached room to room through openings at the same floor height.

For walls:

  • Same picture - any part of either face.
  • The walls it runs on into - solid walls follow solid walls corner to corner, until three or more meet.

For objects:

  • Same kind

Copy and paste properties

Copy its properties (Ctrl+Shift+C) and Paste the copied properties (Ctrl+Shift+V) carry a look from one thing to others. They copy:

  • A room: its heights, floor and ceiling pictures, brightness, effect and other settings.
  • A wall: its pictures on each face, and how its upper and lower pictures are anchored.
  • A face: its pictures and texture shift.
  • An object: its kind, height, action and flags.

They never copy where things are, which way an object faces, tags or ids.

A solid wall's picture pasted onto an opening goes on its upper and lower parts, never across the opening.

The grid and the view

  • [ makes the grid finer and ] makes it coarser, from 1 to 1024 units. While you set it by hand, it is drawn all the time.
  • Grid follows the zoom in Ctrl+K hands it back to the zoom. It is 64, and gets finer as you come closer.
  • Shift+Home shows the selection.
  • Ctrl+G, or a click on the pointer's place in the status bar, opens Go to a point: type how far east (x) and north (y), press Enter, and the plan shows that point in the middle.
  • ' (the quote key) on the plan puts the 3D view at the pointer. In Walk and Fly you stand there. In Orbit you turn round it.

Move and shape

Select a room, or several things, and the Inspector shows MOVE AND SHAPE:

  • Move east by and Move north by - a negative number goes west or south.
  • Slant across and Slant up, in degrees - lean it round its middle. Every area keeps its size.
  • Snap to the grid - a corner whose grid point another corner holds stays where it is. No wall is folded or turned round.
  • Line the corners up evenly - spreads them between the two furthest apart.
  • Space the corners round a circle - a room becomes round.

Ctrl+K has Snap the selection to the grid, Line the corners up evenly and Space the corners round a circle.

A corner's Inspector has Disconnect the rooms that touch here: rooms that meet only at that corner each get a corner of their own, pulled a few units into their rooms, so they no longer touch (Ctrl+K: Disconnect the rooms at a corner). A corner that closes a room round it is left whole, with the reason.

A wall's Inspector has Split it in half. A room's has Swap the floor and ceiling pictures, with how each is shifted, turned and lit.

Find and replace

Press Ctrl+F, or pick the Find tab beside Inspector, Textures, Objects and Versions.

  1. Choose what to look for: Wall pictures, Floor and ceiling pictures, Objects, Wall actions, Room effects or Tags.
  2. Type a name, a few letters of one, or a number. For pictures, * stands for any letters and ? for one, so STARTAN* finds every picture that starts so.
  3. For objects, tick Easy, Normal and Hard to find only those on those difficulties.

The list fills as you type, and again after every change to the map. Only in the selection looks only at what is selected. Each find has Show, and Select them all selects every one.

Type what goes in its place and press Replace all. Only the parts that matched change: a face's matching parts, a room's matching floor or ceiling. A new tag goes on the rooms and on the switches that work on them, so they still work. It is one step: Ctrl+Z takes it all back. WadSmith says no to a picture your game does not have, or a name that could mean more than one object.

Sound zones

Ctrl+K Show sound zones colours the rooms that hear each other's shots. Rooms joined across open walls share a colour. A wall marked Blocks sound in its Inspector, or a shut door, splits them. A shot carries across one wall that blocks sound into the next zone, but never across two.

Pictures in the 3D view

Point at a wall, floor or ceiling in the 3D view:

  • Ctrl+C picks up its picture.
  • Ctrl+V puts it on the one under the pointer. On a wall it covers the whole straight wall, as a drop does.

With nothing under the pointer, they copy and paste the selection as usual.

See Keyboard Shortcuts and The 3D View.

Clone this wiki locally