Cannot read CPU temperature after installing `zenpower3`

[italoghost]

Hi! I have installed zenpower3 so MangoHud could show the power draw of my Ryzen CPU. However, after installing it, minimon could not read the CPU temperature.

Is it happening because minimon just read the k10power kernel module?

Here is the output of sensors:

zenpower-pci-00c3
Adapter: PCI adapter
SVI2_Core:     1.12 V
SVI2_SoC:      1.08 V
Tdie:         +41.6°C  (high = +95.0°C)
Tctl:         +41.6°C
Tccd1:        +49.2°C
SVI2_P_Core:  16.96 W
SVI2_P_SoC:   10.51 W
SVI2_C_Core:  15.81 A
SVI2_C_SoC:    9.71 A

nvme-pci-0100
Adapter: PCI adapter
Composite:    +32.9°C  (low  =  -5.2°C, high = +79.8°C)
                       (crit = +84.8°C)

nct6797-isa-0a20
Adapter: ISA adapter
in0:                   552.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                     1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                     3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                     3.33 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                     1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                   144.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                   848.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                     3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                     3.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                     1.86 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                    0.00 V  (min =  +0.00 V, max =  +0.00 V)
in11:                  792.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.10 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  712.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                    1.53 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                  1520 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
fan6:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +31.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = CPU diode
CPUTIN:                 +36.0°C  (high = +112.0°C, hyst = +90.0°C)  sensor = thermistor
AUXTIN0:                +34.5°C  (high = +112.0°C, hyst = +90.0°C)  sensor = thermistor
AUXTIN1:               -128.0°C    sensor = thermistor
AUXTIN2:                +37.0°C    sensor = thermistor
AUXTIN3:                 -2.0°C    sensor = thermistor
SMBUSMASTER 0:          +41.5°C
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
PCH_CHIP_TEMP:           +0.0°C
PCH_CPU_TEMP:            +0.0°C
PCH_MCH_TEMP:            +0.0°C
Agent0 Dimm0:            +0.0°C
TSI0_TEMP:              +41.6°C
pwm1:                      128%  (mode = pwm)
pwm2:                       60%  (mode = pwm)
pwm3:                       74%  (mode = pwm)
pwm4:                       74%  (mode = pwm)
pwm5:                       74%  (mode = pwm)
pwm6:                       74%  (mode = pwm)
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

amdgpu-pci-2800
Adapter: PCI adapter
vddgfx:      856.00 mV
fan1:        1388 RPM  (min =    0 RPM, max = 3300 RPM)
edge:         +28.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
junction:     +30.0°C  (crit = +110.0°C, hyst = -273.1°C)
                       (emerg = +115.0°C)
mem:          +26.0°C  (crit = +105.0°C, hyst = -273.1°C)
                       (emerg = +110.0°C)
PPT:           7.00 W  (cap = 211.00 W)
pwm1:             46%  MANUAL CONTROL
sclk:          58 MHz
mclk:          96 MHz

[Hyperchaotic]

Hi, yeah I look for the files created by the k10power module in /sys/class/hwmon/k10power I know zenpower creates a directory there as well with files containing sensor readings but I don't have an AMD machine to work on. Zenpower is quite complex and differs between CPUs models having different sensors like Tdie, Ccd or Tctl and there would have to be parsing logic made and decisions of which one to show.

[italoghost]

Hi! I have tested the latest commit and it is working! Thank you for your support!

[Hyperchaotic]

Great. I didn't know which sensor is most relevant, I prioritized them in this order TDie, CCD, TCl. I see you have a TDie so that's probably what you'll see.