Skip to content

Commit 04e1e70

Browse files
btiberiugroeck
btiberiu
authored and
groeck
committed
hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors
Add basic support for the Maxim Integrated MAX31722/MAX31723 SPI temperature sensors / thermostats. Includes: - ACPI support; - raw temperature readings; - power management Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
1 parent 7a18afe commit 04e1e70

File tree

4 files changed

+210
-0
lines changed

4 files changed

+210
-0
lines changed

‎Documentation/hwmon/max31722‎

Lines changed: 34 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,34 @@
1+
Kernel driver max31722
2+
======================
3+
4+
Supported chips:
5+
* Maxim Integrated MAX31722
6+
Prefix: 'max31722'
7+
ACPI ID: MAX31722
8+
Addresses scanned: -
9+
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf
10+
* Maxim Integrated MAX31723
11+
Prefix: 'max31723'
12+
ACPI ID: MAX31723
13+
Addresses scanned: -
14+
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf
15+
16+
Author: Tiberiu Breana <tiberiu.a.breana@intel.com>
17+
18+
Description
19+
-----------
20+
21+
This driver adds support for the Maxim Integrated MAX31722/MAX31723 thermometers
22+
and thermostats running over an SPI interface.
23+
24+
Usage Notes
25+
-----------
26+
27+
This driver uses ACPI to auto-detect devices. See ACPI IDs in the above section.
28+
29+
Sysfs entries
30+
-------------
31+
32+
The following attribute is supported:
33+
34+
temp1_input Measured temperature. Read-only.

‎drivers/hwmon/Kconfig‎

Lines changed: 10 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -821,6 +821,16 @@ config SENSORS_MAX197
821821
This driver can also be built as a module. If so, the module
822822
will be called max197.
823823

824+
config SENSORS_MAX31722
825+
tristate "MAX31722 temperature sensor"
826+
depends on SPI
827+
help
828+
Support for the Maxim Integrated MAX31722/MAX31723 digital
829+
thermometers/thermostats operating over an SPI interface.
830+
831+
This driver can also be built as a module. If so, the module
832+
will be called max31722.
833+
824834
config SENSORS_MAX6639
825835
tristate "Maxim MAX6639 sensor chip"
826836
depends on I2C

‎drivers/hwmon/Makefile‎

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -112,6 +112,7 @@ obj-$(CONFIG_SENSORS_MAX16065) += max16065.o
112112
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
113113
obj-$(CONFIG_SENSORS_MAX1668) += max1668.o
114114
obj-$(CONFIG_SENSORS_MAX197) += max197.o
115+
obj-$(CONFIG_SENSORS_MAX31722) += max31722.o
115116
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
116117
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
117118
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o

‎drivers/hwmon/max31722.c‎

Lines changed: 165 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,165 @@
1+
/*
2+
* max31722 - hwmon driver for Maxim Integrated MAX31722/MAX31723 SPI
3+
* digital thermometer and thermostats.
4+
*
5+
* Copyright (c) 2016, Intel Corporation.
6+
*
7+
* This file is subject to the terms and conditions of version 2 of
8+
* the GNU General Public License. See the file COPYING in the main
9+
* directory of this archive for more details.
10+
*/
11+
12+
#include <linux/acpi.h>
13+
#include <linux/hwmon.h>
14+
#include <linux/hwmon-sysfs.h>
15+
#include <linux/kernel.h>
16+
#include <linux/module.h>
17+
#include <linux/spi/spi.h>
18+
19+
#define MAX31722_REG_CFG 0x00
20+
#define MAX31722_REG_TEMP_LSB 0x01
21+
22+
#define MAX31722_MODE_CONTINUOUS 0x00
23+
#define MAX31722_MODE_STANDBY 0x01
24+
#define MAX31722_MODE_MASK 0xFE
25+
#define MAX31722_RESOLUTION_12BIT 0x06
26+
#define MAX31722_WRITE_MASK 0x80
27+
28+
struct max31722_data {
29+
struct device *hwmon_dev;
30+
struct spi_device *spi_device;
31+
u8 mode;
32+
};
33+
34+
static int max31722_set_mode(struct max31722_data *data, u8 mode)
35+
{
36+
int ret;
37+
struct spi_device *spi = data->spi_device;
38+
u8 buf[2] = {
39+
MAX31722_REG_CFG | MAX31722_WRITE_MASK,
40+
(data->mode & MAX31722_MODE_MASK) | mode
41+
};
42+
43+
ret = spi_write(spi, &buf, sizeof(buf));
44+
if (ret < 0) {
45+
dev_err(&spi->dev, "failed to set sensor mode.\n");
46+
return ret;
47+
}
48+
data->mode = (data->mode & MAX31722_MODE_MASK) | mode;
49+
50+
return 0;
51+
}
52+
53+
static ssize_t max31722_show_temp(struct device *dev,
54+
struct device_attribute *attr,
55+
char *buf)
56+
{
57+
ssize_t ret;
58+
struct max31722_data *data = dev_get_drvdata(dev);
59+
60+
ret = spi_w8r16(data->spi_device, MAX31722_REG_TEMP_LSB);
61+
if (ret < 0)
62+
return ret;
63+
/* Keep 12 bits and multiply by the scale of 62.5 millidegrees/bit. */
64+
return sprintf(buf, "%d\n", (s16)le16_to_cpu(ret) * 125 / 32);
65+
}
66+
67+
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
68+
max31722_show_temp, NULL, 0);
69+
70+
static struct attribute *max31722_attrs[] = {
71+
&sensor_dev_attr_temp1_input.dev_attr.attr,
72+
NULL,
73+
};
74+
75+
ATTRIBUTE_GROUPS(max31722);
76+
77+
static int max31722_probe(struct spi_device *spi)
78+
{
79+
int ret;
80+
struct max31722_data *data;
81+
82+
data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL);
83+
if (!data)
84+
return -ENOMEM;
85+
86+
spi_set_drvdata(spi, data);
87+
data->spi_device = spi;
88+
/*
89+
* Set SD bit to 0 so we can have continuous measurements.
90+
* Set resolution to 12 bits for maximum precision.
91+
*/
92+
data->mode = MAX31722_MODE_CONTINUOUS | MAX31722_RESOLUTION_12BIT;
93+
ret = max31722_set_mode(data, MAX31722_MODE_CONTINUOUS);
94+
if (ret < 0)
95+
return ret;
96+
97+
data->hwmon_dev = hwmon_device_register_with_groups(&spi->dev,
98+
spi->modalias,
99+
data,
100+
max31722_groups);
101+
if (IS_ERR(data->hwmon_dev)) {
102+
max31722_set_mode(data, MAX31722_MODE_STANDBY);
103+
return PTR_ERR(data->hwmon_dev);
104+
}
105+
106+
return 0;
107+
}
108+
109+
static int max31722_remove(struct spi_device *spi)
110+
{
111+
struct max31722_data *data = spi_get_drvdata(spi);
112+
113+
hwmon_device_unregister(data->hwmon_dev);
114+
115+
return max31722_set_mode(data, MAX31722_MODE_STANDBY);
116+
}
117+
118+
static int __maybe_unused max31722_suspend(struct device *dev)
119+
{
120+
struct spi_device *spi_device = to_spi_device(dev);
121+
struct max31722_data *data = spi_get_drvdata(spi_device);
122+
123+
return max31722_set_mode(data, MAX31722_MODE_STANDBY);
124+
}
125+
126+
static int __maybe_unused max31722_resume(struct device *dev)
127+
{
128+
struct spi_device *spi_device = to_spi_device(dev);
129+
struct max31722_data *data = spi_get_drvdata(spi_device);
130+
131+
return max31722_set_mode(data, MAX31722_MODE_CONTINUOUS);
132+
}
133+
134+
static SIMPLE_DEV_PM_OPS(max31722_pm_ops, max31722_suspend, max31722_resume);
135+
136+
static const struct spi_device_id max31722_spi_id[] = {
137+
{"max31722", 0},
138+
{"max31723", 0},
139+
{}
140+
};
141+
142+
static const struct acpi_device_id __maybe_unused max31722_acpi_id[] = {
143+
{"MAX31722", 0},
144+
{"MAX31723", 0},
145+
{}
146+
};
147+
148+
MODULE_DEVICE_TABLE(spi, max31722_spi_id);
149+
150+
static struct spi_driver max31722_driver = {
151+
.driver = {
152+
.name = "max31722",
153+
.pm = &max31722_pm_ops,
154+
.acpi_match_table = ACPI_PTR(max31722_acpi_id),
155+
},
156+
.probe = max31722_probe,
157+
.remove = max31722_remove,
158+
.id_table = max31722_spi_id,
159+
};
160+
161+
module_spi_driver(max31722_driver);
162+
163+
MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
164+
MODULE_DESCRIPTION("max31722 sensor driver");
165+
MODULE_LICENSE("GPL v2");

0 commit comments

Comments
 (0)