Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for Sv57-based virtual memory.

 - Various improvements for the MicroChip PolarFire SOC and the
   associated Icicle dev board, which should allow upstream kernels to
   boot without any additional modifications.

 - An improved memmove() implementation.

 - Support for the new Ssconfpmf and SBI PMU extensions, which allows
   for a much more useful perf implementation on RISC-V systems.

 - Support for restartable sequences.

* tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
  rseq/selftests: Add support for RISC-V
  RISC-V: Add support for restartable sequence
  MAINTAINERS: Add entry for RISC-V PMU drivers
  Documentation: riscv: Remove the old documentation
  RISC-V: Add sscofpmf extension support
  RISC-V: Add perf platform driver based on SBI PMU extension
  RISC-V: Add RISC-V SBI PMU extension definitions
  RISC-V: Add a simple platform driver for RISC-V legacy perf
  RISC-V: Add a perf core library for pmu drivers
  RISC-V: Add CSR encodings for all HPMCOUNTERS
  RISC-V: Remove the current perf implementation
  RISC-V: Improve /proc/cpuinfo output for ISA extensions
  RISC-V: Do no continue isa string parsing without correct XLEN
  RISC-V: Implement multi-letter ISA extension probing framework
  RISC-V: Extract multi-letter extension names from "riscv, isa"
  RISC-V: Minimal parser for "riscv, isa" strings
  RISC-V: Correctly print supported extensions
  riscv: Fixed misaligned memory access. Fixed pointer comparison.
  MAINTAINERS: update riscv/microchip entry
  riscv: dts: microchip: add new peripherals to icicle kit device tree
  ...

Author: torvalds

Documentation/devicetree/bindings/clock/microchip,mpfs.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Clock Control Module Binding
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description: |
+  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
+  which gates and enables all peripheral clocks.
+
+  This device tree binding describes 33 gate clocks.  Clocks are referenced by
+  user nodes by the CLKCFG node phandle and the clock index in the group, from
+  0 to 32.
+
+properties:
+  compatible:
+    const: microchip,mpfs-clkcfg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h
+      for the full list of PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Config node:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            clkcfg: clock-controller@20002000 {
+                compatible = "microchip,mpfs-clkcfg";
+                reg = <0x0 0x20002000 0x0 0x1000>;
+                clocks = <&ref>;
+                #clock-cells = <1>;
+        };
+    };

Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml

@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS GPIO Controller Device Tree Bindings
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - microchip,mpfs-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  ngpios:
+    description:
+      The number of GPIOs available.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@20122000 {
+        compatible = "microchip,mpfs-gpio";
+        reg = <0x20122000 0x1000>;
+        clocks = <&clkcfg 25>;
+        interrupt-parent = <&plic>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>;
+    };
+...

Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml renamed to Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/microchip,polarfire-soc-mailbox.yaml#"
+$id: "http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller
@@ -11,7 +11,7 @@ maintainers:
 
 properties:
   compatible:
-    const: microchip,polarfire-soc-mailbox
+    const: microchip,mpfs-mailbox
 
   reg:
     items:
@@ -38,7 +38,7 @@ examples:
       #address-cells = <2>;
       #size-cells = <2>;
       mbox: mailbox@37020000 {
-        compatible = "microchip,polarfire-soc-mailbox";
+        compatible = "microchip,mpfs-mailbox";
         reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318c 0x0 0x40>;
         interrupt-parent = <&L1>;
         interrupts = <96>;

Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml

@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip IP corePWM controller bindings
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  corePWM is an 16 channel pulse width modulator FPGA IP
+
+  https://www.microsemi.com/existing-parts/parts/152118
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: microchip,corepwm-rtl-v4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  microchip,sync-update-mask:
+    description: |
+      Depending on how the IP is instantiated, there are two modes of operation.
+      In synchronous mode, all channels are updated at the beginning of the PWM period,
+      and in asynchronous mode updates happen as the control registers are written.
+      A 16 bit wide "SHADOW_REG_EN" parameter of the IP core controls whether synchronous
+      mode is possible for each channel, and is set by the bitstream programmed to the
+      FPGA. If the IP core is instantiated with SHADOW_REG_ENx=1, both registers that
+      control the duty cycle for channel x have a second "shadow"/buffer reg synthesised.
+      At runtime a bit wide register exposed to APB can be used to toggle on/off
+      synchronised mode for all channels it has been synthesised for.
+      Each bit of "microchip,sync-update-mask" corresponds to a PWM channel & represents
+      whether synchronous mode is possible for the PWM channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  microchip,dac-mode-mask:
+    description: |
+      Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates
+      a minimum period pulse train whose High/Low average is that of the chosen duty
+      cycle. This "DAC" will have far better bandwidth and ripple performance than the
+      standard PWM algorithm can achieve. A 16 bit DAC_MODE module parameter of the IP
+      core, set at instantiation and by the bitstream programmed to the FPGA, determines
+      whether a given channel operates in regular PWM or DAC mode.
+      Each bit corresponds to a PWM channel & represents whether DAC mode is enabled
+      for that channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@41000000 {
+      compatible = "microchip,corepwm-rtl-v4";
+      microchip,sync-update-mask = /bits/ 32 <0>;
+      clocks = <&clkcfg 30>;
+      reg = <0x41000000 0xF0>;
+      #pwm-cells = <2>;
+    };

Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
+
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Soc (MPFS) RTC Device Tree Bindings
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+  - Lewis Hanly <lewis.hanly@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: |
+          RTC_WAKEUP interrupt
+      - description: |
+          RTC_MATCH, asserted when the content of the Alarm register is equal
+          to that of the RTC's count register.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@20124000 {
+        compatible = "microchip,mpfs-rtc";
+        reg = <0x20124000 0x1000>;
+        clocks = <&clkcfg 21>;
+        clock-names = "rtc";
+        interrupts = <80>, <81>;
+    };
+...

Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml

@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  PolarFire SoC devices include a microcontroller acting as the system controller,
+  which provides "services" to the main processor and to the FPGA fabric. These
+  services include hardware rng, reprogramming of the FPGA and verfification of the
+  eNVM contents etc. More information on these services can be found online, at
+  https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html
+
+  Communication with the system controller is done via a mailbox, of which the client
+  portion is documented here.
+
+properties:
+  mboxes:
+    maxItems: 1
+
+  compatible:
+    const: microchip,mpfs-sys-controller
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    syscontroller {
+      compatible = "microchip,mpfs-sys-controller";
+      mboxes = <&mbox 0>;
+    };