dt-bindings: pinctrl: use pinctrl.yaml

Also fix some examples to avoid warnings like:
brcm,ns-pinmux.example.dt.yaml: pin-controller@1800c1c0: $nodename:0: 'pin-controller@1800c1c0' does not match '^pinctrl|pinmux@[0-9a-f]+$'

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202063216.24439-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Author: Rafał Miłecki

Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml

@@ -184,6 +184,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml

@@ -147,6 +147,7 @@ allOf:
   # boards are defining it at the moment so it would generate a lot of
   # warnings.
 
+  - $ref: "pinctrl.yaml#"
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml

@@ -67,6 +67,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml

@@ -50,6 +50,9 @@ patternProperties:
                   TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
                   VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml

@@ -62,6 +62,9 @@ patternProperties:
                   USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
                   VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - aspeed,external-nodes

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -83,6 +83,9 @@ patternProperties:
                   UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
                   WDTRST3, WDTRST4]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 

Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml

@@ -37,6 +37,9 @@ patternProperties:
         enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
                 gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml

@@ -41,6 +41,9 @@ patternProperties:
                 vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
                 vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml

@@ -36,6 +36,9 @@ patternProperties:
                 gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
                 usb_port1 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml

@@ -34,6 +34,9 @@ patternProperties:
         enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
                 led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg