Merge tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a number of small char/misc/whatever driver fixes. They
  include:

   - IIO driver fixes for some reported problems

   - nvmem driver fixes

   - fpga driver fixes

   - debugfs memory leak fix in the hv_balloon and irqdomain code
     (irqdomain change was acked by the maintainer)

  All have been in linux-next with no reported problems"

* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
  kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
  HV: hv_balloon: fix memory leak with using debugfs_lookup()
  nvmem: qcom-spmi-sdam: fix module autoloading
  nvmem: core: fix return value
  nvmem: core: fix cell removal on error
  nvmem: core: fix device node refcounting
  nvmem: core: fix registration vs use race
  nvmem: core: fix cleanup after dev_set_name()
  nvmem: core: remove nvmem_config wp_gpio
  nvmem: core: initialise nvmem->id early
  nvmem: sunxi_sid: Always use 32-bit MMIO reads
  nvmem: brcm_nvram: Add check for kzalloc
  iio: imu: fxos8700: fix MAGN sensor scale and unit
  iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
  iio: imu: fxos8700: fix failed initialization ODR mode assignment
  iio: imu: fxos8700: fix incorrect ODR mode readback
  iio: light: cm32181: Fix PM support on system with 2 I2C resources
  iio: hid: fix the retval in gyro_3d_capture_sample
  iio: hid: fix the retval in accel_3d_capture_sample
  iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
  ...

Author: torvalds

drivers/fpga/intel-m10-bmc-sec-update.c

@@ -574,20 +574,27 @@ static int m10bmc_sec_probe(struct platform_device *pdev)
 	len = scnprintf(buf, SEC_UPDATE_LEN_MAX, "secure-update%d",
 			sec->fw_name_id);
 	sec->fw_name = kmemdup_nul(buf, len, GFP_KERNEL);
-	if (!sec->fw_name)
-		return -ENOMEM;
+	if (!sec->fw_name) {
+		ret = -ENOMEM;
+		goto fw_name_fail;
+	}
 
 	fwl = firmware_upload_register(THIS_MODULE, sec->dev, sec->fw_name,
 				       &m10bmc_ops, sec);
 	if (IS_ERR(fwl)) {
 		dev_err(sec->dev, "Firmware Upload driver failed to start\n");
-		kfree(sec->fw_name);
-		xa_erase(&fw_upload_xa, sec->fw_name_id);
-		return PTR_ERR(fwl);
+		ret = PTR_ERR(fwl);
+		goto fw_uploader_fail;
 	}
 
 	sec->fwl = fwl;
 	return 0;
+
+fw_uploader_fail:
+	kfree(sec->fw_name);
+fw_name_fail:
+	xa_erase(&fw_upload_xa, sec->fw_name_id);
+	return ret;
 }
 
 static int m10bmc_sec_remove(struct platform_device *pdev)

drivers/fpga/stratix10-soc.c

@@ -213,9 +213,9 @@ static int s10_ops_write_init(struct fpga_manager *mgr,
 	/* Allocate buffers from the service layer's pool. */
 	for (i = 0; i < NUM_SVC_BUFS; i++) {
 		kbuf = stratix10_svc_allocate_memory(priv->chan, SVC_BUF_SIZE);
-		if (!kbuf) {
+		if (IS_ERR(kbuf)) {
 			s10_free_buffers(mgr);
-			ret = -ENOMEM;
+			ret = PTR_ERR(kbuf);
 			goto init_done;
 		}
 

drivers/hv/hv_balloon.c

@@ -1963,7 +1963,7 @@ static void  hv_balloon_debugfs_init(struct hv_dynmem_device *b)
 
 static void  hv_balloon_debugfs_exit(struct hv_dynmem_device *b)
 {
-	debugfs_remove(debugfs_lookup("hv-balloon", NULL));
+	debugfs_lookup_and_remove("hv-balloon", NULL);
 }
 
 #else

drivers/iio/accel/hid-sensor-accel-3d.c

@@ -280,6 +280,7 @@ static int accel_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
 			hid_sensor_convert_timestamp(
 					&accel_state->common_attributes,
 					*(int64_t *)raw_data);
+		ret = 0;
 	break;
 	default:
 		break;

drivers/iio/adc/berlin2-adc.c

@@ -298,8 +298,10 @@ static int berlin2_adc_probe(struct platform_device *pdev)
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
-	if (!indio_dev)
+	if (!indio_dev) {
+		of_node_put(parent_np);
 		return -ENOMEM;
+	}
 
 	priv = iio_priv(indio_dev);
 

drivers/iio/adc/imx8qxp-adc.c

@@ -86,6 +86,8 @@
 
 #define IMX8QXP_ADC_TIMEOUT		msecs_to_jiffies(100)
 
+#define IMX8QXP_ADC_MAX_FIFO_SIZE		16
+
 struct imx8qxp_adc {
 	struct device *dev;
 	void __iomem *regs;
@@ -95,6 +97,7 @@ struct imx8qxp_adc {
 	/* Serialise ADC channel reads */
 	struct mutex lock;
 	struct completion completion;
+	u32 fifo[IMX8QXP_ADC_MAX_FIFO_SIZE];
 };
 
 #define IMX8QXP_ADC_CHAN(_idx) {				\
@@ -238,8 +241,7 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev,
 			return ret;
 		}
 
-		*val = FIELD_GET(IMX8QXP_ADC_RESFIFO_VAL_MASK,
-				 readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO));
+		*val = adc->fifo[0];
 
 		mutex_unlock(&adc->lock);
 		return IIO_VAL_INT;
@@ -265,10 +267,15 @@ static irqreturn_t imx8qxp_adc_isr(int irq, void *dev_id)
 {
 	struct imx8qxp_adc *adc = dev_id;
 	u32 fifo_count;
+	int i;
 
 	fifo_count = FIELD_GET(IMX8QXP_ADC_FCTRL_FCOUNT_MASK,
 			       readl(adc->regs + IMX8QXP_ADR_ADC_FCTRL));
 
+	for (i = 0; i < fifo_count; i++)
+		adc->fifo[i] = FIELD_GET(IMX8QXP_ADC_RESFIFO_VAL_MASK,
+				readl_relaxed(adc->regs + IMX8QXP_ADR_ADC_RESFIFO));
+
 	if (fifo_count)
 		complete(&adc->completion);
 

drivers/iio/adc/stm32-dfsdm-adc.c

@@ -1520,6 +1520,7 @@ static const struct of_device_id stm32_dfsdm_adc_match[] = {
 	},
 	{}
 };
+MODULE_DEVICE_TABLE(of, stm32_dfsdm_adc_match);
 
 static int stm32_dfsdm_adc_probe(struct platform_device *pdev)
 {

drivers/iio/adc/twl6030-gpadc.c

@@ -57,6 +57,18 @@
 #define TWL6030_GPADCS				BIT(1)
 #define TWL6030_GPADCR				BIT(0)
 
+#define USB_VBUS_CTRL_SET			0x04
+#define USB_ID_CTRL_SET				0x06
+
+#define TWL6030_MISC1				0xE4
+#define VBUS_MEAS				0x01
+#define ID_MEAS					0x01
+
+#define VAC_MEAS                0x04
+#define VBAT_MEAS               0x02
+#define BB_MEAS                 0x01
+
+
 /**
  * struct twl6030_chnl_calib - channel calibration
  * @gain:		slope coefficient for ideal curve
@@ -927,6 +939,26 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = twl_i2c_write_u8(TWL_MODULE_USB, VBUS_MEAS, USB_VBUS_CTRL_SET);
+	if (ret < 0) {
+		dev_err(dev, "failed to wire up inputs\n");
+		return ret;
+	}
+
+	ret = twl_i2c_write_u8(TWL_MODULE_USB, ID_MEAS, USB_ID_CTRL_SET);
+	if (ret < 0) {
+		dev_err(dev, "failed to wire up inputs\n");
+		return ret;
+	}
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0,
+				VBAT_MEAS | BB_MEAS | VAC_MEAS,
+				TWL6030_MISC1);
+	if (ret < 0) {
+		dev_err(dev, "failed to wire up inputs\n");
+		return ret;
+	}
+
 	indio_dev->name = DRIVER_NAME;
 	indio_dev->info = &twl6030_gpadc_iio_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;

drivers/iio/adc/xilinx-ams.c

@@ -1329,7 +1329,7 @@ static int ams_parse_firmware(struct iio_dev *indio_dev)
 
 	dev_channels = devm_krealloc(dev, ams_channels, dev_size, GFP_KERNEL);
 	if (!dev_channels)
-		ret = -ENOMEM;
+		return -ENOMEM;
 
 	indio_dev->channels = dev_channels;
 	indio_dev->num_channels = num_channels;

drivers/iio/gyro/hid-sensor-gyro-3d.c

@@ -231,6 +231,7 @@ static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
 		gyro_state->timestamp =
 			hid_sensor_convert_timestamp(&gyro_state->common_attributes,
 						     *(s64 *)raw_data);
+		ret = 0;
 	break;
 	default:
 		break;