ice: Start hardware initialization

This patch implements multiple pieces of the initialization flow
as follows:

1) A reset is issued to ensure a clean device state, followed
   by initialization of admin queue interface.

2) Once the admin queue interface is up, clear the PF config
   and transition the device to non-PXE mode.

3) Get the NVM configuration stored in the device's non-volatile
   memory (NVM) using ice_init_nvm.

CC: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Author: refactorman

drivers/net/ethernet/intel/ice/Makefile

@@ -9,4 +9,5 @@ obj-$(CONFIG_ICE) += ice.o
 
 ice-y := ice_main.o	\
 	 ice_controlq.o	\
-	 ice_common.o
+	 ice_common.o	\
+	 ice_nvm.o

drivers/net/ethernet/intel/ice/ice.h

@@ -16,8 +16,10 @@
 #include <linux/bitmap.h>
 #include "ice_devids.h"
 #include "ice_type.h"
+#include "ice_common.h"
 
 #define ICE_BAR0		0
+#define ICE_AQ_LEN		64
 
 #define ICE_DFLT_NETIF_M (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
 

drivers/net/ethernet/intel/ice/ice_adminq_cmd.h

@@ -36,6 +36,67 @@ struct ice_aqc_q_shutdown {
 	u8 reserved[12];
 };
 
+/* Request resource ownership (direct 0x0008)
+ * Release resource ownership (direct 0x0009)
+ */
+struct ice_aqc_req_res {
+	__le16 res_id;
+#define ICE_AQC_RES_ID_NVM		1
+#define ICE_AQC_RES_ID_SDP		2
+#define ICE_AQC_RES_ID_CHNG_LOCK	3
+#define ICE_AQC_RES_ID_GLBL_LOCK	4
+	__le16 access_type;
+#define ICE_AQC_RES_ACCESS_READ		1
+#define ICE_AQC_RES_ACCESS_WRITE	2
+
+	/* Upon successful completion, FW writes this value and driver is
+	 * expected to release resource before timeout. This value is provided
+	 * in milliseconds.
+	 */
+	__le32 timeout;
+#define ICE_AQ_RES_NVM_READ_DFLT_TIMEOUT_MS	3000
+#define ICE_AQ_RES_NVM_WRITE_DFLT_TIMEOUT_MS	180000
+#define ICE_AQ_RES_CHNG_LOCK_DFLT_TIMEOUT_MS	1000
+#define ICE_AQ_RES_GLBL_LOCK_DFLT_TIMEOUT_MS	3000
+	/* For SDP: pin id of the SDP */
+	__le32 res_number;
+	/* Status is only used for ICE_AQC_RES_ID_GLBL_LOCK */
+	__le16 status;
+#define ICE_AQ_RES_GLBL_SUCCESS		0
+#define ICE_AQ_RES_GLBL_IN_PROG		1
+#define ICE_AQ_RES_GLBL_DONE		2
+	u8 reserved[2];
+};
+
+/* Clear PXE Command and response (direct 0x0110) */
+struct ice_aqc_clear_pxe {
+	u8 rx_cnt;
+#define ICE_AQC_CLEAR_PXE_RX_CNT		0x2
+	u8 reserved[15];
+};
+
+/* NVM Read command (indirect 0x0701)
+ * NVM Erase commands (direct 0x0702)
+ * NVM Update commands (indirect 0x0703)
+ */
+struct ice_aqc_nvm {
+	u8	cmd_flags;
+#define ICE_AQC_NVM_LAST_CMD		BIT(0)
+#define ICE_AQC_NVM_PCIR_REQ		BIT(0)	/* Used by NVM Update reply */
+#define ICE_AQC_NVM_PRESERVATION_S	1
+#define ICE_AQC_NVM_PRESERVATION_M	(3 << CSR_AQ_NVM_PRESERVATION_S)
+#define ICE_AQC_NVM_NO_PRESERVATION	(0 << CSR_AQ_NVM_PRESERVATION_S)
+#define ICE_AQC_NVM_PRESERVE_ALL	BIT(1)
+#define ICE_AQC_NVM_PRESERVE_SELECTED	(3 << CSR_AQ_NVM_PRESERVATION_S)
+#define ICE_AQC_NVM_FLASH_ONLY		BIT(7)
+	u8	module_typeid;
+	__le16	length;
+#define ICE_AQC_NVM_ERASE_LEN	0xFFFF
+	__le32	offset;
+	__le32	addr_high;
+	__le32	addr_low;
+};
+
 /**
  * struct ice_aq_desc - Admin Queue (AQ) descriptor
  * @flags: ICE_AQ_FLAG_* flags
@@ -65,6 +126,9 @@ struct ice_aq_desc {
 		struct ice_aqc_generic generic;
 		struct ice_aqc_get_ver get_ver;
 		struct ice_aqc_q_shutdown q_shutdown;
+		struct ice_aqc_req_res res_owner;
+		struct ice_aqc_clear_pxe clear_pxe;
+		struct ice_aqc_nvm nvm;
 	} params;
 };
 
@@ -82,13 +146,28 @@ struct ice_aq_desc {
 /* error codes */
 enum ice_aq_err {
 	ICE_AQ_RC_OK		= 0,  /* success */
+	ICE_AQ_RC_EBUSY		= 12, /* Device or resource busy */
+	ICE_AQ_RC_EEXIST	= 13, /* object already exists */
 };
 
 /* Admin Queue command opcodes */
 enum ice_adminq_opc {
 	/* AQ commands */
 	ice_aqc_opc_get_ver				= 0x0001,
 	ice_aqc_opc_q_shutdown				= 0x0003,
+
+	/* resource ownership */
+	ice_aqc_opc_req_res				= 0x0008,
+	ice_aqc_opc_release_res				= 0x0009,
+
+	/* PXE */
+	ice_aqc_opc_clear_pxe_mode			= 0x0110,
+
+	ice_aqc_opc_clear_pf_cfg			= 0x02A4,
+
+	/* NVM commands */
+	ice_aqc_opc_nvm_read				= 0x0701,
+
 };
 
 #endif /* _ICE_ADMINQ_CMD_H_ */