Drivers Storage EN

Language: English ｜ Drivers-Storage

Storage bring-up manual

Families and commands

Driver	QEMU attach	Command	Test
ATA/ATAPI PIO+DMA	default IDE	ata	ata_dma_test, disk_rw_test
AHCI	-machine q35 (ich9-ahci)	ahci	ahci_test
NVMe	-device nvme	nvme	nvme_test
virtio-blk	-device virtio-blk-pci	lsblk/dskstat	virtio_blk_test
USB MSC	-device usb-storage (xHCI)	usb, usbdev	usb_storage_test
SD/SDHCI	board-specific	lsblk	(family driver)
SCSI LSI	-device lsi53c810	scsi	scsitest

Bring-up order

1. lspci / usb - the device is on the bus.
2. The family probe claims it and registers a block instance (ata0, nvme0, usda...) - dskstat.
3. Partition scan exposes partitions; lsblk shows the tree.
4. Filesystem: mkfs.fat32 <dev> confirm + fatmount <dev> /mnt, or mount an existing volume directly.
5. Gate: fstest + disk_rw_test + a mount/unmount cycle.

Known sharp edges

• ATA-DMA PRDT alignment depends on the heap's 32-byte header - if you touch mem_heap.c, rerun ata_dma_test + a FAT32 mount.
• xHCI/any 32-bit-DMA device: above-4GiB addresses are refused at probe and per-transfer by design.
• virtio requires the negotiated features before first I/O; the driver handles version negotiation (legacy/modern).