Skip to content

Filesystems EN

Jump to bottom
Z User edited this page Oct 24, 2026 · 2 revisions

Language: English ｜ Filesystems

Filesystems and storage

The VFS

All file access goes through one VFS (fs/fs_vfs.c): a uniform open/read/write/seek/close/stat/mkdir/rmdir/readdir/lookup API over pluggable filesystem types. Paths walk the global node tree and cross mount points transparently. Per-filesystem case sensitivity, enforced permission bits, and 64-bit seek offsets are real VFS behaviours.

Filesystem types

Type Read Write Where it lives
ramfs yes yes memory (volatile) - the default root
FAT32 yes yes any block device; LFN supported
exFAT yes yes any block device
ext4 yes yes any block device (extent-based)
/etc volume yes yes a small FAT32 image mounted at /etc 
oc> dskstat                     (list block devices)
oc> mkfs.fat32 ata0 confirm     (format - the confirm arg is required)
oc> mkfs.exfat usda confirm
oc> mkfs.ext4 ata0 confirm
oc> fatmount ata0 /mnt          (mount FAT32)
oc> mount                       (list mounts; umount unmounts)

Formatting is destructive - every mkfs.* requires the literal confirm argument so a stray Enter does not erase a disk.

The /etc volume

A 32 MiB FAT32 image holding the system's persistent state:

opencube.conf     (key=value system configuration - see `config`)
ssh host keys     (sshd identity - see [[Networking-EN|network]])
kernel.log        (rotated kernel log - see [../internals/klog.md])
crash dumps       (see [[Recovery-EN|recovery]])

Configuration reads/writes go through the config command and the L1 l1_ext_config_* interface family; the /etc volume is mounted automatically at boot when present.

Block devices

The block layer names instances (ata0, usda, nvme0, vdisk0 for virtio, sd0 for SD) and provides partition scanning on top:

  • ATA/ATAPI PIO and bus-master DMA (PRDT alignment guaranteed by the heap's 32-byte header block)
  • AHCI - SATA controllers
  • NVMe - PCIe SSDs
  • virtio-blk - the fast path under QEMU (-device virtio-blk-pci)
  • USB MSC - mass-storage sticks through any of the USB stacks
  • SD/SDHCI and SCSI (LSI 53C8xx family) controllers

Partition tables

GPT and MBR (msdos) partition tables are scanned; partition devices appear alongside whole-disk devices. fdisk-style inspection plus per-partition mount is available - see the Command-Reference-EN for the disk domain.

File commands

oc> ls /mnt
oc> cat /mnt/hello.txt
oc> write /mnt/hello.txt "new content"
oc> cp /mnt/a.txt /mnt/b.txt
oc> mv /mnt/a.txt /mnt/c.txt
oc> rm /mnt/c.txt
oc> mkdir /mnt/dir
oc> touch /mnt/empty.txt
oc> editor /mnt/notes.txt        (full-screen editor)
oc> fsck ata0                     (filesystem check)
oc> fstest                        (VFS + per-fs self-test suite)

Limits worth knowing

  • Long paths and file names: FAT32 LFN is fully supported including alias generation with collision scanning and checksum/sequence validation on read.
  • Dual-FAT mirror maintenance and FSINFO free-cluster hints are maintained on FAT32; exFAT tracks the active FAT.
  • ramfs sparse holes read back as zeros.
  • umount / is refused; mount shadowing does not duplicate children.

Clone this wiki locally