Introduction Project

Supplied components

• Arduino Nano
• BMP180
• SPDT switch
• Micro SD card reader
• Micro SD card
• PH2.0 battery connector
• 2S LiHV battery (13x17x52mm)

Constraints

Must fit within a 25mmx120mm Cylinder. This includes both the designed PCB and LiHV battery

Schematic design Task

1. Add the BMP180, MicroSD card reader, switch and 2 pin connector to the schematic The BMP180 and MicroSD card schematic designs are provided in this template and the switch and 2 pin connector are provided by KiCad
2. Add the connections from each component to each other, this will require finding the pinout of the arduino nano to correctly wire the MicroSD card and BMP180. The BMP180 uses an I2C interface, while the MicroSD uses SPI.

Other information

On the launch day we will supply the LiHV batteries, we can also provide these before hand for testing but we are not able to give them out.

We are aiming for 10 boards to be manufactured due to component count. If more components are required then we are also able to buy more.