Skip to content

Releases

Vintyl 0.9.1

Choose a tag to compare

@github-actions github-actions released this 20 Nov 21:06

An outline and its fill in two colours, and a colour can be removed.

Colours

  • An outline and its fill in two colours, drawn with two pens (a black outline, a pink fill): the
    Fill window (and the bucket in the Colours panel) chooses the fill's colour: as the shape, another
    colour of the design, or a new one, put before the outline's so the outline is drawn last. The
    Colours list counts and selects a shape under both colours. Saved in the project (a fill's
    "layer"); an older Vintyl draws such a fill in the outline's colour.
  • Opening an SVG: a shape with a stroke of another colour than its fill (a pink shape with a black
    edge) opens as a black outline with a pink fill; the colours window lists both colours, its
    picture shows the fills, and a colour that only fills others is drawn first.
  • Remove this colour (the right mouse button on a colour in the panel, with its settings and its
    fill): its elements go to the first other colour, the fills it drew to their shapes' own colour.
  • The Colours list shows up to four colours and scrolls the rest, so the element list keeps its
    room on a 768 px screen.
  • A fill in a new colour is previewed on the sheet in that colour while the Fill window is open.

Fixed

  • Moving the first colour in the Colours panel (or putting a new one before it) no longer gives its
    colour to the shapes drawn before the design had colours.

Changed

  • Zooming out stops at the whole sheet (100%), which then sits where Fit puts it and follows the
    window's size again; zooming in has no such limit.

Vintyl 0.9.0

Choose a tag to compare

@github-actions github-actions released this 17 Nov 22:36

Colours: a design of several colours, drawn with several pens or cut from
several colours of vinyl, one colour after another.

Colours

  • An SVG of several colours opens in its colours. A window shows each colour of the file and the
    colour of the design it goes to: similar colours (delta E under 15: two pinks, two greys) are
    merged, so one pen draws them; or each on its own; or all in one colour, as before. Gradients
    count as their first colour; invisible shapes are left out. Shapes filled in the file get a line
    fill for the pen.
  • The Colours panel (when there is more than one): the order they are drawn in, a colour left out,
    a click selects its elements, and each colour's name, colour, pen width and where its stroke lies.
    On the sheet and in the element list every element shows in its colour.
  • A fill for a whole colour (the bucket in the Colours panel, with the pen): every closed shape of
    that colour gets the pattern, in the same window as Fill; the list shows it beside the colour.
  • The right mouse button → Colour moves elements to another colour, or to a new one.
  • Start goes colour after colour: the check list names them in order, and before each a window asks
    to put in its pen (or its vinyl), with Skip this colour and Finish. All the colours keep the same
    origin, so they land exactly on each other.
  • Save .hpgl writes one file for each colour.
  • Settings → Drawing: what the colours window proposes first, Merge similar or Each on its own.
  • A demo to try it: docs/demo/vintyl-demo.svg, Vintyl's logo and name in nine colours (five when
    merged).
  • Projects keep their colours. A project without them (from an older Vintyl) opens in one colour.

Vintyl 0.8.1

Choose a tag to compare

@github-actions github-actions released this 17 Nov 21:04

Four more languages, and small fixes.

Languages

  • German, Spanish, French and Brazilian Portuguese, besides English and Polish (the languages of
    Kerfly, and Portuguese for Brazil). A system in Portuguese gets the Brazilian translation. Numbers
    are written with a decimal comma where the language does.
  • The window fits a 1366 px screen in every language: the ribbon and the tool strip may use shorter
    words than the menus.

Materials

  • Reflective vinyl: the 60° blade with its 0.50 mm knife offset (Roland's blade guide).

Fixed

  • The cutter settings and materials windows scroll their cards when made low, instead of squeezing
    them over each other.
  • The window fits a 1366 px screen also with a wide system font (DejaVu Sans): the ribbon and the
    selection bar are a little tighter, and a tool's name too long for its tile is a pixel smaller.

For developers

  • Tests on GitHub after every push (Linux, Python 3.12 and 3.13, DejaVu Sans): the self-test, all
    the tests and the translations' check.
  • From the source, Vintyl needs Python 3.12 or newer: with 3.11, PySide6 miscounts None and Python
    aborts. The AppImage has its own Python and is not affected.

Vintyl 0.8.0

Choose a tag to compare

@github-actions github-actions released this 17 Nov 20:06

A new look for the whole window (UI v2), and materials. A big step, so the
number jumps from 0.2 to 0.8: the cutters are tested and cut cleanly, and
1.0 is near.

Materials

  • A material keeps how to cut or draw it: the tool, the force and speed for each cutter, the blade,
    knife offset and overcut, the mirror, the weeding frame and a note. Built in: vinyl film, heat
    transfer vinyl, reflective vinyl, paper with a fineliner, card with a marker; add your own.
  • Choosing a material sets the job's switches; it is remembered for each cutter and in the project.
  • A cutter that takes force and speed from its panel only gets them shown in large type before Start.
  • Starting force and speed in the built-in materials for the cutters with the XILI board (VEVOR,
    Seiki), all at 300 mm/s. The big 870 mm cutters: vinyl 80 g, heat transfer vinyl 120 g, reflective
    80 g, pens 70 g; the small KI-375A (and another model) presses harder: half (vinyl 50 g). Check
    them with the knife test.

The window

  • Light and dark looks in the same style for every window; the cutter, the tool and the material
    in the left panel, with the cutter's state and what to do when its port cannot be used.
  • The selection bar shows the type and name of what is selected; a text's fields have a second row;
    the ruler's result is shown in it too. Fits a 1366 × 768 screen in every state.
  • The element list shows the cutting order and scissors to leave an element uncut; the right button
    on it opens the same menu as on the sheet (duplicate, delete, cutting order...).
  • The sheet has rulers in mm, sizes beside the selection and zoom buttons.
  • Start, Save .hpgl and the knife test stay at the bottom of the left panel, always in sight;
    Stop takes Start's place while sending, with the percentage sent.
  • Speeds in mm/s.

Placing

  • To 0,0 (Ctrl+Home, as Kerfly's "design to the head"): the selected elements, or the whole design
    as it is laid out, go together up to the origin, where the cutter's head starts; room is left for
    the weeding frame and the knife.

Windows

  • The check list before Start and the knife test are windows of their own, with the material's
    values; a yellow warning when the mirror is on.
  • Pattern of shapes and Fill show a preview of the shape in the window; the fill patterns are
    buttons with their pictures.
  • Ready shapes show their picture beside the fields; questions say what their button does.
  • Settings, cutter settings and materials as cards with switches.
  • About, Keyboard shortcuts (in groups, with a search), Diagnostic report and Access to the cutter
    (the commands to copy); the new-version bar under the ribbon.
  • vintyl --self-test checks the built-in materials too.

Website and guide

  • A website with a user guide, in English and Polish: https://cyryllo.github.io/vintyl/
  • The README rewritten; credits for the code from Kerfly and K40 Whisperer and for the programs
    studied (Inkcut, CutScape, RedsailCut) in the README and THIRD-PARTY-NOTICES.md.

Fixed

  • Help → About, Keyboard shortcuts and Access to the cutter open again (they were built but not shown).
  • The mouse wheel changes a list or a number field only once it is clicked; scrolling a panel no
    longer changes the values passing under the mouse.
  • Dragging a small square round the selection resizes the shape again: the square lost the drag
    at the first move, so the shape moved a little and went back to its size.

Vintyl 0.2.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 22:08

The second test version (Linux, AppImage). Still tested on the VEVOR KI-375A
only; the larger cutters' profiles are to be checked on the machines. Please
tell us how it works on yours: Help → Diagnostic report → "Report my cutter".

For vinyl

  • Mirror for heat transfer vinyl: one switch in the Job; the screen shows the design as on the shirt.
  • Knife test: a 15 mm square with a triangle, cut near the origin to check the force.
  • Copies in rows and columns, a gap apart (or as many as fit in the width).
  • Weeding lines: cuts through the waste between the shapes, up to the weeding frame.
  • Split into strips: a design wider than the cutter (or longer than a sheet) in overlapping strips,
    laid one after another on the material.

Drawing and files

  • Text on a path: a text along a line, a curve or round a circle (letters keep their curves).
  • Open DXF drawings (units from the file, asked when it has none).
  • The rectangle tool has a corner radius; turn the selection by any angle; a right-click menu.

The program

  • Settings: language (as the system, English, Polski) and look (light, dark, as the system).
  • A new version is announced in the window (asks GitHub at most once a day; can be turned off).
  • From the AppImage: add Vintyl to the applications menu (asked once, or Help menu).
  • Help → Diagnostic report: versions, checks, the cutter and the log, to paste into an issue;
    GitHub forms to report a problem or how Vintyl works on your cutter.

Vintyl 0.1.0a1

Vintyl 0.1.0a1 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 16 Nov 21:37

The first test version, for Linux (an AppImage). Tested on a VEVOR KI-375A
(cuts from the window: an SVG heart, cut cleanly). Expect rough edges; please
report what goes wrong in the issues.

Cutting

  • Send to the cutter from the window: Start and Stop, a check list before
    cutting, progress. USB printer cutters (/dev/usb/lp…, such as the VEVOR
    KI-375A) and serial ports (/dev/ttyUSB…); HPGL and DMPL.
  • Knife compensation at the corners only (smooth on curves), overcut,
    inside shapes cut first, a weeding frame round the design, the knife path
    shown on the sheet. Save the cutter file (.hpgl) without cutting.
  • Pen / pencil mode: draws on paper, with the stroke on, outside or inside
    the line, and fill patterns (lines, cross-hatch, waves, honeycomb and more).
  • Under the port, Vintyl says when the device needs a Linux group (lp or
    dialout) and how to join it.

Drawing

  • The sheet as you see it from the front of the cutter, the cutting width
    across, growing upwards with the design.
  • Rectangle, ellipse, polygon, line, polyline, pen with curves, freehand,
    text with the system's fonts, ready shapes (star, heart, gear, ring,
    arrow and more), QR codes; open SVG files.
  • Move, resize with handles, rotate, mirror, align, distribute, group,
    union / difference / intersection / exclusion, offset (with "remove the
    holes"), a pattern of small shapes inside a shape, node editing, ruler,
    grid, snapping, undo, shortcuts.
  • Projects (.vintyl). Polish and English.

Cutters

  • Choose the machine in the window; its port, connection, command language,
    axes, knife offset, overcut and speed are in its settings window (the
    button beside it). A built-in profile you change is kept as your copy
    ("Restore factory settings" brings the original back); add cutters of
    your own (~/.config/vintyl/profiles).
  • Built-in profiles: VEVOR KI-375A (checked on the machine), VEVOR 870 mm
    (34 in, cuts 780 mm; said to have the KI-375A's control board, to be
    checked) and Seiki SK-870T (to be checked).