Skip to content

Vintyl 0.8.0

Choose a tag to compare

@github-actions github-actions released this 17 Nov 20:06
· 24 commits to main since this release

A new look for the whole window (UI v2), and materials. A big step, so the
number jumps from 0.2 to 0.8: the cutters are tested and cut cleanly, and
1.0 is near.

Materials

  • A material keeps how to cut or draw it: the tool, the force and speed for each cutter, the blade,
    knife offset and overcut, the mirror, the weeding frame and a note. Built in: vinyl film, heat
    transfer vinyl, reflective vinyl, paper with a fineliner, card with a marker; add your own.
  • Choosing a material sets the job's switches; it is remembered for each cutter and in the project.
  • A cutter that takes force and speed from its panel only gets them shown in large type before Start.
  • Starting force and speed in the built-in materials for the cutters with the XILI board (VEVOR,
    Seiki), all at 300 mm/s. The big 870 mm cutters: vinyl 80 g, heat transfer vinyl 120 g, reflective
    80 g, pens 70 g; the small KI-375A (and another model) presses harder: half (vinyl 50 g). Check
    them with the knife test.

The window

  • Light and dark looks in the same style for every window; the cutter, the tool and the material
    in the left panel, with the cutter's state and what to do when its port cannot be used.
  • The selection bar shows the type and name of what is selected; a text's fields have a second row;
    the ruler's result is shown in it too. Fits a 1366 × 768 screen in every state.
  • The element list shows the cutting order and scissors to leave an element uncut; the right button
    on it opens the same menu as on the sheet (duplicate, delete, cutting order...).
  • The sheet has rulers in mm, sizes beside the selection and zoom buttons.
  • Start, Save .hpgl and the knife test stay at the bottom of the left panel, always in sight;
    Stop takes Start's place while sending, with the percentage sent.
  • Speeds in mm/s.

Placing

  • To 0,0 (Ctrl+Home, as Kerfly's "design to the head"): the selected elements, or the whole design
    as it is laid out, go together up to the origin, where the cutter's head starts; room is left for
    the weeding frame and the knife.

Windows

  • The check list before Start and the knife test are windows of their own, with the material's
    values; a yellow warning when the mirror is on.
  • Pattern of shapes and Fill show a preview of the shape in the window; the fill patterns are
    buttons with their pictures.
  • Ready shapes show their picture beside the fields; questions say what their button does.
  • Settings, cutter settings and materials as cards with switches.
  • About, Keyboard shortcuts (in groups, with a search), Diagnostic report and Access to the cutter
    (the commands to copy); the new-version bar under the ribbon.
  • vintyl --self-test checks the built-in materials too.

Website and guide

  • A website with a user guide, in English and Polish: https://cyryllo.github.io/vintyl/
  • The README rewritten; credits for the code from Kerfly and K40 Whisperer and for the programs
    studied (Inkcut, CutScape, RedsailCut) in the README and THIRD-PARTY-NOTICES.md.

Fixed

  • Help → About, Keyboard shortcuts and Access to the cutter open again (they were built but not shown).
  • The mouse wheel changes a list or a number field only once it is clicked; scrolling a panel no
    longer changes the values passing under the mouse.
  • Dragging a small square round the selection resizes the shape again: the square lost the drag
    at the first move, so the shape moved a little and went back to its size.