Skip to content

Releases

pool-controller 1.6.0

Choose a tag to compare

@github-actions github-actions released this 18 Nov 15:01
87f7e27

piscine-card 1.6.0, for Home Assistant (install or update through HACS).

Pool Controller firmware v1.6.0: firmware.ota.bin updates an installed controller, firmware.factory.bin is a whole image for a first install, manifest.json describes both.

Changes to the card since v1.3.1:

  • fix(ha-card): neutral row icons, not the theme's state icon colour
  • fix(ha-card): keep the tappable version rows aligned with the others
  • chore(ha-card): 1.6.0
  • fix(ha-card): word a failed update check for « nothing published yet » too
  • refactor(ha-card): leave version checks to the controller and HACS
  • fix(ha-card): Avancé in the device page's order
  • fix(ha-card): line up the Remplissage tiles' values on a phone
  • chore(ha-card): VERSION 1.5.0
  • feat(ha-card): Avancé › Firmware on the update entity, GitHub check kept for firmware without it
  • feat(ha-card): Réglages › Position, from Home Assistant's location and zone
  • feat(ha-card): IANA to POSIX time-zone table, PiscineCard.posixTz
  • feat(firmware): settings package, no !secret left (1.4.0)

Changes to the firmware since v1.3.1:

  • docs: Avancé's new order, and version checks left to the controller and HACS
  • fix(web-ui): word a failed update check for « nothing published yet » too
  • refactor(web-ui): drop the GitHub compare from the device page
  • fix(web-ui): Avancé reads Plan du jour, Capteurs internes, Réglages, 7 derniers jours, Journal
  • fix(web-ui): keep Fill Water Import off the device page
  • feat(firmware): Fill Water Import, to fill the fill-water record from Home Assistant
  • fix(web-ui): read entity ids the way ESPHome 2026.11 sends them
  • feat(firmware): look for updates on the Pages site's custom domain
  • fix(firmware): keep Auto Update's choice across boots, no false update
  • fix(firmware): turn Auto Update on by default, as decided
  • refactor(web-ui): convert time zones with the card's full table
  • feat(web-ui): say what today's plan waits for
  • feat(web-ui): add the setup wizard and the Contrôleur tab's settings sections
  • fix(web-ui): restart the event stream after the controller refuses it
  • feat(web-ui): add the time zone table and the setup's pure logic, unit-tested
  • feat(firmware): republish Setup State right after each settings write
  • feat(web-ui): firmware section installs through the controller
  • feat(firmware): updates package with an install gate in front of HA's update entity
  • feat(firmware): settings package, no !secret left (1.4.0)

piscine-card 1.3.1

Choose a tag to compare

@github-actions github-actions released this 17 Nov 21:27
cacefcc

piscine-card 1.3.1, for Home Assistant (install or update through HACS).

Changes to the card since v1.3.0:

  • fix(ha-card): read the build time from ESPHome 2026.7's version string

piscine-card 1.3.0

Choose a tag to compare

@github-actions github-actions released this 17 Nov 18:10
921952c

piscine-card 1.3.0, for Home Assistant (install or update through HACS).

Changes to the card since v1.2.1:

  • refactor(ha-card): set the override's duration only where the override is forced
  • refactor(ha-card): drop « Planning et réglages » from the « Pompe » tab
  • feat(ha-card): add a Firmware section to « Avancé », with a check for updates
  • feat: say whether the Wi-Fi signal is good, medium or weak
  • feat(webui): add a « Remplissage » tab to the controller's page, from its own record
  • feat(ha-card): show this month's fill water next to today's
  • feat(ha-card): no temperature range to pick without the recorder
  • feat(ha-card): move the controller's details to an « Avancé » tab, with its firmware
  • feat(ha-card): add 90 j and 1 an to the pool temperature graph
  • feat(ha-card): show when the controller was last heard, with a status light
  • feat(ha-card): add a « Réglages » tab with every control, as on the controller's page
  • feat(ha-card): show the outdoor and equipment-pad temperatures in the « Pompe » tab
  • refactor(ha-card): split the settings rows from the settings variant's frame
  • feat(ha-card): add a settings variant whose rows never cut their text
  • feat(ha-card): show the fill water's history in a « Remplissage » tab
  • feat(ha-card): draw the freeze-protection threshold in red
  • feat(ha-card): draw the freeze-protection threshold on the temperature graph
  • fix(ha-card): keep the 24 h curve's points on the clock's 5-min marks
  • feat(ha-card): draw the pool's temperature over 24 h, 7 and 30 days

piscine-card 1.2.1

Choose a tag to compare

@github-actions github-actions released this 14 Nov 10:19
57f44aa

piscine-card 1.2.1, for Home Assistant (install or update through HACS).