Repository navigation
piscine-card 1.3.0
piscine-card 1.3.0, for Home Assistant (install or update through HACS).
Changes to the card since v1.2.1:
- refactor(ha-card): set the override's duration only where the override is forced
- refactor(ha-card): drop « Planning et réglages » from the « Pompe » tab
- feat(ha-card): add a Firmware section to « Avancé », with a check for updates
- feat: say whether the Wi-Fi signal is good, medium or weak
- feat(webui): add a « Remplissage » tab to the controller's page, from its own record
- feat(ha-card): show this month's fill water next to today's
- feat(ha-card): no temperature range to pick without the recorder
- feat(ha-card): move the controller's details to an « Avancé » tab, with its firmware
- feat(ha-card): add 90 j and 1 an to the pool temperature graph
- feat(ha-card): show when the controller was last heard, with a status light
- feat(ha-card): add a « Réglages » tab with every control, as on the controller's page
- feat(ha-card): show the outdoor and equipment-pad temperatures in the « Pompe » tab
- refactor(ha-card): split the settings rows from the settings variant's frame
- feat(ha-card): add a settings variant whose rows never cut their text
- feat(ha-card): show the fill water's history in a « Remplissage » tab
- feat(ha-card): draw the freeze-protection threshold in red
- feat(ha-card): draw the freeze-protection threshold on the temperature graph
- fix(ha-card): keep the 24 h curve's points on the clock's 5-min marks
- feat(ha-card): draw the pool's temperature over 24 h, 7 and 30 days