Repository navigation
Releases
Screambox 2.1.0
Screambox release notes
Screambox is a bassline synthesizer and step sequencer for Windows, built to
be used entirely from the keyboard and with a screen reader. Every control is
a standard Windows control with a label, so it reads the same way in NVDA,
JAWS and Narrator.
It is built on CreakBox by Frank Reitz (Bass Assessor), 2002, and on its 2004
VST source, published by bioroid media development. The filter, oscillator,
envelope and accent are theirs, kept unchanged on purpose. Screambox was
called Creakbox until November 2026; the name changed so that nobody
mistakes it for Bass Assessor's original.
Getting started
Requirements: 64-bit Windows 10 or 11. Nothing to install: unzip anywhere and
run Screambox.exe.
F1 lists every key in the program
F5 play the song
F6 play the current pattern, looped
F7 play from the current pattern
F8 stop
Ctrl+S save the song (.roq)
Ctrl+O open a song
Ctrl+I import a 2002 CreakBox module (.cb)
Ctrl+W save the song to a WAV file
Ctrl+M Modulation: every slider that can move by itself
Press Enter on any slider - in the main window, the Oscillator dialog or the
Acid FX dialog - to open its sweep editor, which moves that slider over time,
or swings it up and down with an LFO.
README.md is the full manual.
If something sounds wrong
Save the song straight away (Ctrl+S) and send the .roq file with a sentence
about what you heard and how you started playback (F5, F6 or F7). A saved
song can be rendered exactly as you heard it.
Source and issues: https://github.com/dengopaiv/Screambox
==============================================================================
2.1.0 - 9 November 2026
Sweeps on every slider, LFOs, and sweeps that glide. The sound engine is the
original, unchanged: a song that uses none of this sounds exactly as before.
Your songs
- Every song made by 2.0.0 or earlier opens in 2.1.0, back to the original
2002 .cb modules. - A song with sweeps sounds slightly different between the starts of steps,
because sweeps now glide (see below). At the start of every step it is
exactly what it was. - A song that used the PWM LFO opens with it turned into an LFO on Main PWM
and Duplet PWM. It sounds the same from the start of the song. One
difference: the old LFO ran free, so every play caught it at another
point; now it starts again with the song, so every play is the same. - The other way round is limited. A song saved by 2.1.0 opens in 2.0.0
unless it uses something new: an LFO, or a sweep on a slider in the
Oscillator or Acid FX dialog or on Accent squelch. 2.0.0 then refuses it
with "unsupported version" rather than playing it wrong.
What is new
-
Sweeps on every slider.
Accent squelch and every slider in the Oscillator and Acid FX dialogs can
now be swept. Press Enter on any slider, in the main window or in a
dialog, to open its sweep editor. In the dialogs Alt+C or Esc closes. -
Sweeps glide.
A sweep used to hold one value for each step, so a ramp was a staircase.
Now it moves smoothly, sample by sample, within each step. -
LFOs.
An LFO is a sweep with a wave. In the sweep editor choose an LFO wave
(Alt+W): triangle, sine, square, saw up or saw down. Then:- Swing (Alt+B): "Around the slider" swings around the slider's own
setting, or around a straight sweep on the same steps, and the two
values are how far it swings each way. "Between the start value and
the end value" swings between those two values, whatever the slider
says. Changing Swing converts the values so the swing stays where it
was. - Frequency (Alt+Q), measured in (Alt+M) steps per cycle, which follows
the tempo (16 is one swing per 16-step bar), or Hz, which does not. - Starting phase (Alt+I), in degrees: where in its swing it starts.
- Hold keeps it going after its end, until the next LFO on that slider.
On Ring frequency an "around" depth is in cents (100 cents is a
semitone). An LFO's phase follows the song position, so every play and
every WAV export of a song are the same.
- Swing (Alt+B): "Around the slider" swings around the slider's own
-
The PWM LFO has moved.
The PWM LFO sliders have gone from the Oscillator dialog. To get the same
effect: press Enter on Main PWM (or the duplet's PWM) and choose an LFO
wave, or use the Modulation dialog's preset "The old PWM LFO". -
Modulation dialog (Ctrl+M, or the Modulation button).
Lists every slider that can move by itself, each with what it carries,
for example "Cutoff (2 sweeps, 1 LFO)". Enter opens that slider's sweep
editor. "LFO preset" and "Add LFO to the whole song" put a ready-made LFO
on the chosen slider. F1 explains. -
Sweep editor.
- Shapes: Shape kind (Alt+K), Cycles (Alt+X) and Generate shape (Alt+G)
draw a ramp, an up-and-down or an alternation over the range, made of
ordinary sweeps you can edit afterwards. - "(new sweep)" is always the last entry in Sweep number. It starts in
the first range no sweep covers yet. (Adding a second sweep used to be
impossible.) A refused sweep says which sweep is in the way. - Apply (Alt+Y) lets you hear a change without closing the editor.
Cancel still undoes everything since the editor opened. - F5 to F8 play and stop inside the editor and the other dialogs too,
and the dialog's status line says what the transport did. - Help (F1) explains sweeps and LFOs.
- A value you have not touched is kept exactly; it used to be rounded to
the nearest slider position on Add or Update.
- Shapes: Shape kind (Alt+K), Cycles (Alt+X) and Generate shape (Alt+G)
-
Ring frequency.
The slider now goes up to 5 kHz (was 2 kHz) in 1000 fine steps, so a
value like 95 Hz can be set. Songs store Hz, so nothing saved moves.
Keys added in this version
Ctrl+M Modulation dialog (main window)
Enter on a dialog slider: its sweep editor
F5 to F8 play / stop, also inside the dialogs
F1 in the sweep editor and Modulation dialog: help
Alt+W, Alt+B, Alt+Q, Alt+M, Alt+I sweep editor: LFO wave, swing,
frequency, measured in, starting phase
Alt+K, Alt+G sweep editor: shape kind, generate shape
Alt+X sweep editor: cycles
Alt+Y sweep editor: Apply
Screambox 2.0.0
Screambox 2.0.0 - 7 November 2026
Screambox is a bassline synthesizer and step sequencer for Windows, built to be
used entirely from the keyboard and with a screen reader. Every control is a
standard Windows control with a label, so it reads the same way in NVDA,
JAWS and Narrator.
It is built on CreakBox by Frank Reitz (Bass Assessor), 2002, and on its 2004
VST source, published by bioroid media development. The filter, oscillator,
envelope and accent are theirs, kept unchanged on purpose.
NEW NAME: this is the first release as Screambox. Version 1.0.0, in October
2026, was called Creakbox; the name changed so that nobody mistakes it for
Bass Assessor's original 2002 CreakBox. Help, About says the same. Songs
(.roq) and sweep files (.hape) saved under the old name open unchanged.
Getting started
Requirements: 64-bit Windows 10 or 11. Nothing to install: unzip anywhere and
run Screambox.exe. 1.0.0 needed the Visual C++ runtime installed; 2.0.0 does
not.
F1 lists every key in the program
F5 play the song
F6 play the current pattern
F7 play from the current pattern
F8 stop
Ctrl+S save the song (.roq)
Ctrl+O open a song
Ctrl+I import a 2002 CreakBox module (.cb)
Ctrl+W save the song to a WAV file
Press Enter on any of the seven sound sliders (Volume to Tuning) to open the
sweep editor, which changes that slider over time across steps and patterns.
README.md is the full manual.
What is new since 1.0.0
-
Sweeps.
- A sweep now takes effect from the first sample of its step. Before, it
was heard up to one audio buffer late, so notes started with the
previous step's value. - A sweep moves the same amount at every step, even across patterns of
different lengths. - New "Hold the end value until the next sweep" checkbox (Alt+H).
- New Update button (Alt+U) changes the sweep you are looking at, and
Cancel now really undoes everything done since the editor opened. - Keys in the editor changed: End pattern is Alt+D, Paste is Alt+S, Save
to file is Alt+F. Alt+N and Alt+T were each shared by two controls. - A slider with sweeps says so in its name, for example
"Cutoff (2 sweeps)". - Saving a song while a sweep plays saves the slider setting, not the
sweep's value at that moment.
- A sweep now takes effect from the first sample of its step. Before, it
-
A slide on the last step of a pattern now glides into the first note of
the next pattern (or of the same pattern when looping). It used to click. -
Adding or deleting a pattern during playback no longer makes playback jump,
and sweeps stay on the music they were written for. New random pattern and
Import .cb now clear the old song's sweeps. -
Tempo is exact at every sample rate. At 48 kHz it ran very slightly fast,
and triplet bars were a few samples short. -
Save to WAV includes sweeps and has the right length for any pattern
lengths and triplet feel. -
Acid FX: Fuzz no longer leaves an offset on rests, which with the ring
modulator on used to play the carrier tone between notes. -
Accent squelch goes from 0 to 200 percent; 100 is the original sound, and
0 (no accent stacking) can now be reached. -
Audio device: unplug the headphones during playback and it carries on
through the next output, announcing "Audio device changed, now ...". If no
output is left it says "Audio device lost" and waits. Changing the default
output in Windows moves playback there too. -
MIDI input has been removed. It never worked: notes were received and
never played. -
D sharp 4 (pitch 52) was about 71 cents flat since 2004. It is now in
tune.
If something sounds wrong
Save the song straight away (Ctrl+S) and send the .roq file with a sentence
about what you heard and how you started playback (F5, F6 or F7). A saved
song can be rendered exactly as you heard it.
Source and issues: https://github.com/dengopaiv/Screambox
Files in this package
Screambox.exe the program
README.md the manual
RELEASE-NOTES.txt this file
LICENSE.txt BSD 3-Clause, for Screambox (2026)
license-bmd.txt BSD-style licence of the 2004 source the DSP comes from
creakbox.txt Bass Assessor's original 2002 CreakBox release note
Creakbox v1.0.0
First release of the Creakbox standalone: an extension of CreakBox (2002) and the Creakbox Bassline VST (2004) into an accessible Windows bassline synth and step sequencer. It began as a TB-303-style voice and has grown well past one.
Every control is a standard Windows control with a label, so it works with screen readers and the keyboard. Press F1 in the program for the full key reference.
Highlights
- Patterns of 1–64 steps, with a per-pattern triplet feel (Ctrl+T)
- Per-step accent, slide and reverse step (Ctrl+Shift+A / S / I)
- PWM LFO, noise, resonance boost
- Acid FX block (Ctrl+D): five distortion models, compressor, ring modulator
- Copy / Cut / Paste pattern (Ctrl+C / X / V)
- Loads the original
.cbpresets; saves.roq(format v12, writes the oldest version that can represent the song)
Not yet checked by ear or with a screen reader: reverse step, the noise source, the distortion models, the compressor and ring modulator, and triplet feel. See TODO.md, section "Needs a human".
Unzip and run Creakbox.exe. No installer, Windows x64. BSD 3-Clause licensed; the 2004 sources it builds on are under license-bmd.txt.