Skip to content

Screambox 2.1.0

Latest

Choose a tag to compare

@dengopaiv dengopaiv released this 09 Nov 17:17

Screambox release notes

Screambox is a bassline synthesizer and step sequencer for Windows, built to
be used entirely from the keyboard and with a screen reader. Every control is
a standard Windows control with a label, so it reads the same way in NVDA,
JAWS and Narrator.

It is built on CreakBox by Frank Reitz (Bass Assessor), 2002, and on its 2004
VST source, published by bioroid media development. The filter, oscillator,
envelope and accent are theirs, kept unchanged on purpose. Screambox was
called Creakbox until November 2026; the name changed so that nobody
mistakes it for Bass Assessor's original.

Getting started

Requirements: 64-bit Windows 10 or 11. Nothing to install: unzip anywhere and
run Screambox.exe.

F1 lists every key in the program
F5 play the song
F6 play the current pattern, looped
F7 play from the current pattern
F8 stop
Ctrl+S save the song (.roq)
Ctrl+O open a song
Ctrl+I import a 2002 CreakBox module (.cb)
Ctrl+W save the song to a WAV file
Ctrl+M Modulation: every slider that can move by itself

Press Enter on any slider - in the main window, the Oscillator dialog or the
Acid FX dialog - to open its sweep editor, which moves that slider over time,
or swings it up and down with an LFO.

README.md is the full manual.

If something sounds wrong

Save the song straight away (Ctrl+S) and send the .roq file with a sentence
about what you heard and how you started playback (F5, F6 or F7). A saved
song can be rendered exactly as you heard it.

Source and issues: https://github.com/dengopaiv/Screambox

==============================================================================
2.1.0 - 9 November 2026

Sweeps on every slider, LFOs, and sweeps that glide. The sound engine is the
original, unchanged: a song that uses none of this sounds exactly as before.

Your songs

  • Every song made by 2.0.0 or earlier opens in 2.1.0, back to the original
    2002 .cb modules.
  • A song with sweeps sounds slightly different between the starts of steps,
    because sweeps now glide (see below). At the start of every step it is
    exactly what it was.
  • A song that used the PWM LFO opens with it turned into an LFO on Main PWM
    and Duplet PWM. It sounds the same from the start of the song. One
    difference: the old LFO ran free, so every play caught it at another
    point; now it starts again with the song, so every play is the same.
  • The other way round is limited. A song saved by 2.1.0 opens in 2.0.0
    unless it uses something new: an LFO, or a sweep on a slider in the
    Oscillator or Acid FX dialog or on Accent squelch. 2.0.0 then refuses it
    with "unsupported version" rather than playing it wrong.

What is new

  1. Sweeps on every slider.
    Accent squelch and every slider in the Oscillator and Acid FX dialogs can
    now be swept. Press Enter on any slider, in the main window or in a
    dialog, to open its sweep editor. In the dialogs Alt+C or Esc closes.

  2. Sweeps glide.
    A sweep used to hold one value for each step, so a ramp was a staircase.
    Now it moves smoothly, sample by sample, within each step.

  3. LFOs.
    An LFO is a sweep with a wave. In the sweep editor choose an LFO wave
    (Alt+W): triangle, sine, square, saw up or saw down. Then:

    • Swing (Alt+B): "Around the slider" swings around the slider's own
      setting, or around a straight sweep on the same steps, and the two
      values are how far it swings each way. "Between the start value and
      the end value" swings between those two values, whatever the slider
      says. Changing Swing converts the values so the swing stays where it
      was.
    • Frequency (Alt+Q), measured in (Alt+M) steps per cycle, which follows
      the tempo (16 is one swing per 16-step bar), or Hz, which does not.
    • Starting phase (Alt+I), in degrees: where in its swing it starts.
    • Hold keeps it going after its end, until the next LFO on that slider.
      On Ring frequency an "around" depth is in cents (100 cents is a
      semitone). An LFO's phase follows the song position, so every play and
      every WAV export of a song are the same.
  4. The PWM LFO has moved.
    The PWM LFO sliders have gone from the Oscillator dialog. To get the same
    effect: press Enter on Main PWM (or the duplet's PWM) and choose an LFO
    wave, or use the Modulation dialog's preset "The old PWM LFO".

  5. Modulation dialog (Ctrl+M, or the Modulation button).
    Lists every slider that can move by itself, each with what it carries,
    for example "Cutoff (2 sweeps, 1 LFO)". Enter opens that slider's sweep
    editor. "LFO preset" and "Add LFO to the whole song" put a ready-made LFO
    on the chosen slider. F1 explains.

  6. Sweep editor.

    • Shapes: Shape kind (Alt+K), Cycles (Alt+X) and Generate shape (Alt+G)
      draw a ramp, an up-and-down or an alternation over the range, made of
      ordinary sweeps you can edit afterwards.
    • "(new sweep)" is always the last entry in Sweep number. It starts in
      the first range no sweep covers yet. (Adding a second sweep used to be
      impossible.) A refused sweep says which sweep is in the way.
    • Apply (Alt+Y) lets you hear a change without closing the editor.
      Cancel still undoes everything since the editor opened.
    • F5 to F8 play and stop inside the editor and the other dialogs too,
      and the dialog's status line says what the transport did.
    • Help (F1) explains sweeps and LFOs.
    • A value you have not touched is kept exactly; it used to be rounded to
      the nearest slider position on Add or Update.
  7. Ring frequency.
    The slider now goes up to 5 kHz (was 2 kHz) in 1000 fine steps, so a
    value like 95 Hz can be set. Songs store Hz, so nothing saved moves.

Keys added in this version

Ctrl+M Modulation dialog (main window)
Enter on a dialog slider: its sweep editor
F5 to F8 play / stop, also inside the dialogs
F1 in the sweep editor and Modulation dialog: help
Alt+W, Alt+B, Alt+Q, Alt+M, Alt+I sweep editor: LFO wave, swing,
frequency, measured in, starting phase
Alt+K, Alt+G sweep editor: shape kind, generate shape
Alt+X sweep editor: cycles
Alt+Y sweep editor: Apply