Skip to content

Releases

OXIde 0.7.7

Choose a tag to compare

@github-actions github-actions released this 18 Nov 20:35
49f3359

English

0.7.7: MIDI Thru passes CCs and program changes; listen on oscillator 1, 2 or both. MIDI Thru let only notes and pitch bend through: a Logic modulator on CC 30 (the cutoff) moved the OSCar when sent to it directly, but not through the plug-in. It now passes CCs, program changes and aftertouch too, on the OSCar's channel. A program change makes the editor follow the OSCar to that voice. What the OSCar sent itself and comes back through the DAW (its notes, its CCs, its program changes) isn't sent back to it: the same program again would reload the voice and lose what was turned on the panel.

On the Waveforms page, Listen on the OSCar is now three buttons under the screen on the right: Osc 1, Osc 2 and Osc 1 + 2. Each sets that oscillator of the selected voice (Wave 1, Wave 2, or both) to the waveform shown, sends the waveforms if they were edited, and makes the OSCar play it at once. The lit button tells which oscillator plays the waveform shown.

0.7.6: the space bar plays Logic, even with the plug-in in front. The plug-in's window no longer keeps the keyboard: the space bar, Return, the arrows and the other key commands go to the DAW whatever you clicked in OXIde last. Before, a clicked button took Return (and clicked itself again), the lists and menus took the arrows, and the Setup page's texts took every key. Their text can still be selected and copied with a right-click.

0.7.5: new versions offered at launch. When OXIde opens (the app, or the plug-in's window) and a new version is out, a tile says so: the version, what it brings in a few words, a link to the full notes, and Update now, which replaces the app, the AU and the VST3 on this Mac in one go. The app can then relaunch itself; a DAW loads the new plug-in when you reopen it. Later puts it off until the next launch, Skip this version for good. A version found once is offered again at each launch until it is installed, even without a connection, and the plug-in looks for new ones at most once an hour.

0.7.4: Listen on the OSCar. The plugin can't see the waveform chosen on the OSCar's panel, so after sending it could only rebuild the waveforms the voice plays in the plugin. A new button on the Waveforms page, Listen on the OSCar, sets Wave 1 of the voice to the waveform shown, sends the waveforms if they were edited, and makes the OSCar play it at once (Live CC on). When the voice plays no user waveform, sending now says what to do.

0.7.3: sent waveforms heard at once, for real. Vincent found that after sending the waveforms, the OSCar kept the old sound until the waveform was chosen again. Its firmware only rebuilds a user waveform when an oscillator's waveform number changes, so sending the same number again (0.7.2) did nothing. Now the oscillators that play a user waveform go to Triangle for a moment, then back (Live CC on, and in the sound recall). Without Live CC, the plugin says how to do it on the OSCar. The waveform buttons go from -12 to -8, left to right, as on the OSCar's keyboard and the memory row.

0.7.2: the Waveforms page, fixed with Vincent's tests. The five waveform buttons could not be clicked before a dump: they always can now. Without the OSCar's waveforms, the page says how to get them (INSERT + a WAVEFORM button + SPACE) or starts from five sines. The bars go up to 127 and the preview shows what the OSCar plays, computed the way its firmware does, in red where it saturates; Fit level scales a waveform so it just fits, as the OSCar does with its own, and sending offers it for the ones that saturate. After sending, Wave 1 and Wave 2 go again (Live CC on), so the OSCar rebuilds the waveform it plays: it only builds a user waveform when it is chosen.

0.7.1: RANDOM becomes SUPERMOD, and a SAVE button. SUPERMOD, since it does LFO waves as well as randoms: the button, its strip and the right-click menu now speak of modulations; projects keep their settings. New SAVE button, next to SUPERMOD, with two tabs. In the OSCar: pick a memory, Store in this memory sends the voice whole (SUPERMOD and MORPH hold meanwhile) and shows the keys to press on the OSCar, VOICE, STORE and the number, since no MIDI message can store a voice; Done and the plugin knows that memory holds it. Only that memory changes. Whole bank... still writes all 36. On the computer: save the voice, the bank or a .syx file, and open the folder.

0.7.0: RANDOM and SCALE, played from the bottom. RANDOM and SCALE leave the header: two buttons next to Live CC open their strips where the memories are. The RANDOM strip has SHAPE, a RATE knob with SYNC (a division of the DAW's tempo, or free from 10 s to 10 ms), LOOP (off, or 2 to 64 steps), New loop, MODE (bipolar or unipolar), ACTIVE and Clear all. A control turned up follows the shape as drawn, turned down upside down, whatever the shape; bipolar, it moves either side of its value, unipolar only on one side. Every control that moves lights up along its scale, all the time: a glowing arc from its own value to where it plays, with a bright tip (orange turned up, amber turned down); in the layer, a dim arc shows the whole range it sweeps. Right-click a knob, a fader or a switch: switch its random off (it is kept, its LED goes dark) or on again, remove it, go back to the saved value, or switch off or remove every random. ACTIVE off switches all of them off at once, amounts kept; the project remembers both. The SCALE strip has SCALE, ROOT and a one-octave keyboard lighting the scale's notes (click a key for the root). A double-click on a knob or a fader puts it back where the voice was when last saved (project opened, sent, dumped).

0.6.5: recall, always, ask first or never. Recalling the project's sound replaces what the OSCar plays, a sound just made on its panel and not stored included. So it is now a choice on the Setup page, kept on this computer: always, ask first (the default) or never. With ask first, the plugin's window asks when a project opens, or as soon as you open it: Recall the project's sound or Keep the OSCar's sound; nothing is sent until then. Recall now, next to it, sends the selected voice whole at any time.

0.6.4: the project's sound comes back, and waveforms received as they are. A new option on the Setup page, on by default: Recall the sound when the project opens. When a project opens, the OSCar gets the selected voice exactly as saved in the project, whatever its memories hold: all its values as CC, the tempo, and the user waveforms if the voice plays one. So a sound changed after the last save comes back as saved. Nothing is written into the OSCar's voice memories.

Waveforms dumped by the OSCar could be refused as "damaged by a text-mode copy (CR/LF)": some real harmonic levels read like that damage. Data straight from MIDI is never checked for it any more (only a copied file can be damaged that way), and the check on files is stricter, so it no longer mistakes such levels for damage.

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, har...

Read more

OXIde 0.7.6

Choose a tag to compare

@github-actions github-actions released this 17 Nov 20:19
4918c17

English

0.7.6: the space bar plays Logic, even with the plug-in in front. The plug-in's window no longer keeps the keyboard: the space bar, Return, the arrows and the other key commands go to the DAW whatever you clicked in OXIde last. Before, a clicked button took Return (and clicked itself again), the lists and menus took the arrows, and the Setup page's texts took every key. Their text can still be selected and copied with a right-click.

0.7.5: new versions offered at launch. When OXIde opens (the app, or the plug-in's window) and a new version is out, a tile says so: the version, what it brings in a few words, a link to the full notes, and Update now, which replaces the app, the AU and the VST3 on this Mac in one go. The app can then relaunch itself; a DAW loads the new plug-in when you reopen it. Later puts it off until the next launch, Skip this version for good. A version found once is offered again at each launch until it is installed, even without a connection, and the plug-in looks for new ones at most once an hour.

0.7.4: Listen on the OSCar. The plugin can't see the waveform chosen on the OSCar's panel, so after sending it could only rebuild the waveforms the voice plays in the plugin. A new button on the Waveforms page, Listen on the OSCar, sets Wave 1 of the voice to the waveform shown, sends the waveforms if they were edited, and makes the OSCar play it at once (Live CC on). When the voice plays no user waveform, sending now says what to do.

0.7.3: sent waveforms heard at once, for real. Vincent found that after sending the waveforms, the OSCar kept the old sound until the waveform was chosen again. Its firmware only rebuilds a user waveform when an oscillator's waveform number changes, so sending the same number again (0.7.2) did nothing. Now the oscillators that play a user waveform go to Triangle for a moment, then back (Live CC on, and in the sound recall). Without Live CC, the plugin says how to do it on the OSCar. The waveform buttons go from -12 to -8, left to right, as on the OSCar's keyboard and the memory row.

0.7.2: the Waveforms page, fixed with Vincent's tests. The five waveform buttons could not be clicked before a dump: they always can now. Without the OSCar's waveforms, the page says how to get them (INSERT + a WAVEFORM button + SPACE) or starts from five sines. The bars go up to 127 and the preview shows what the OSCar plays, computed the way its firmware does, in red where it saturates; Fit level scales a waveform so it just fits, as the OSCar does with its own, and sending offers it for the ones that saturate. After sending, Wave 1 and Wave 2 go again (Live CC on), so the OSCar rebuilds the waveform it plays: it only builds a user waveform when it is chosen.

0.7.1: RANDOM becomes SUPERMOD, and a SAVE button. SUPERMOD, since it does LFO waves as well as randoms: the button, its strip and the right-click menu now speak of modulations; projects keep their settings. New SAVE button, next to SUPERMOD, with two tabs. In the OSCar: pick a memory, Store in this memory sends the voice whole (SUPERMOD and MORPH hold meanwhile) and shows the keys to press on the OSCar, VOICE, STORE and the number, since no MIDI message can store a voice; Done and the plugin knows that memory holds it. Only that memory changes. Whole bank... still writes all 36. On the computer: save the voice, the bank or a .syx file, and open the folder.

0.7.0: RANDOM and SCALE, played from the bottom. RANDOM and SCALE leave the header: two buttons next to Live CC open their strips where the memories are. The RANDOM strip has SHAPE, a RATE knob with SYNC (a division of the DAW's tempo, or free from 10 s to 10 ms), LOOP (off, or 2 to 64 steps), New loop, MODE (bipolar or unipolar), ACTIVE and Clear all. A control turned up follows the shape as drawn, turned down upside down, whatever the shape; bipolar, it moves either side of its value, unipolar only on one side. Every control that moves lights up along its scale, all the time: a glowing arc from its own value to where it plays, with a bright tip (orange turned up, amber turned down); in the layer, a dim arc shows the whole range it sweeps. Right-click a knob, a fader or a switch: switch its random off (it is kept, its LED goes dark) or on again, remove it, go back to the saved value, or switch off or remove every random. ACTIVE off switches all of them off at once, amounts kept; the project remembers both. The SCALE strip has SCALE, ROOT and a one-octave keyboard lighting the scale's notes (click a key for the root). A double-click on a knob or a fader puts it back where the voice was when last saved (project opened, sent, dumped).

0.6.5: recall, always, ask first or never. Recalling the project's sound replaces what the OSCar plays, a sound just made on its panel and not stored included. So it is now a choice on the Setup page, kept on this computer: always, ask first (the default) or never. With ask first, the plugin's window asks when a project opens, or as soon as you open it: Recall the project's sound or Keep the OSCar's sound; nothing is sent until then. Recall now, next to it, sends the selected voice whole at any time.

0.6.4: the project's sound comes back, and waveforms received as they are. A new option on the Setup page, on by default: Recall the sound when the project opens. When a project opens, the OSCar gets the selected voice exactly as saved in the project, whatever its memories hold: all its values as CC, the tempo, and the user waveforms if the voice plays one. So a sound changed after the last save comes back as saved. Nothing is written into the OSCar's voice memories.

Waveforms dumped by the OSCar could be refused as "damaged by a text-mode copy (CR/LF)": some real harmonic levels read like that damage. Data straight from MIDI is never checked for it any more (only a copied file can be damaged that way), and the check on files is stricter, so it no longer mistakes such levels for damage.

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load...

Read more

OXIde 0.7.5

Choose a tag to compare

@github-actions github-actions released this 17 Nov 09:22
ba0c8d4

English

0.7.5: new versions offered at launch. When OXIde opens (the app, or the plug-in's window) and a new version is out, a tile says so: the version, what it brings in a few words, a link to the full notes, and Update now, which replaces the app, the AU and the VST3 on this Mac in one go. The app can then relaunch itself; a DAW loads the new plug-in when you reopen it. Later puts it off until the next launch, Skip this version for good. A version found once is offered again at each launch until it is installed, even without a connection, and the plug-in looks for new ones at most once an hour.

0.7.4: Listen on the OSCar. The plugin can't see the waveform chosen on the OSCar's panel, so after sending it could only rebuild the waveforms the voice plays in the plugin. A new button on the Waveforms page, Listen on the OSCar, sets Wave 1 of the voice to the waveform shown, sends the waveforms if they were edited, and makes the OSCar play it at once (Live CC on). When the voice plays no user waveform, sending now says what to do.

0.7.3: sent waveforms heard at once, for real. Vincent found that after sending the waveforms, the OSCar kept the old sound until the waveform was chosen again. Its firmware only rebuilds a user waveform when an oscillator's waveform number changes, so sending the same number again (0.7.2) did nothing. Now the oscillators that play a user waveform go to Triangle for a moment, then back (Live CC on, and in the sound recall). Without Live CC, the plugin says how to do it on the OSCar. The waveform buttons go from -12 to -8, left to right, as on the OSCar's keyboard and the memory row.

0.7.2: the Waveforms page, fixed with Vincent's tests. The five waveform buttons could not be clicked before a dump: they always can now. Without the OSCar's waveforms, the page says how to get them (INSERT + a WAVEFORM button + SPACE) or starts from five sines. The bars go up to 127 and the preview shows what the OSCar plays, computed the way its firmware does, in red where it saturates; Fit level scales a waveform so it just fits, as the OSCar does with its own, and sending offers it for the ones that saturate. After sending, Wave 1 and Wave 2 go again (Live CC on), so the OSCar rebuilds the waveform it plays: it only builds a user waveform when it is chosen.

0.7.1: RANDOM becomes SUPERMOD, and a SAVE button. SUPERMOD, since it does LFO waves as well as randoms: the button, its strip and the right-click menu now speak of modulations; projects keep their settings. New SAVE button, next to SUPERMOD, with two tabs. In the OSCar: pick a memory, Store in this memory sends the voice whole (SUPERMOD and MORPH hold meanwhile) and shows the keys to press on the OSCar, VOICE, STORE and the number, since no MIDI message can store a voice; Done and the plugin knows that memory holds it. Only that memory changes. Whole bank... still writes all 36. On the computer: save the voice, the bank or a .syx file, and open the folder.

0.7.0: RANDOM and SCALE, played from the bottom. RANDOM and SCALE leave the header: two buttons next to Live CC open their strips where the memories are. The RANDOM strip has SHAPE, a RATE knob with SYNC (a division of the DAW's tempo, or free from 10 s to 10 ms), LOOP (off, or 2 to 64 steps), New loop, MODE (bipolar or unipolar), ACTIVE and Clear all. A control turned up follows the shape as drawn, turned down upside down, whatever the shape; bipolar, it moves either side of its value, unipolar only on one side. Every control that moves lights up along its scale, all the time: a glowing arc from its own value to where it plays, with a bright tip (orange turned up, amber turned down); in the layer, a dim arc shows the whole range it sweeps. Right-click a knob, a fader or a switch: switch its random off (it is kept, its LED goes dark) or on again, remove it, go back to the saved value, or switch off or remove every random. ACTIVE off switches all of them off at once, amounts kept; the project remembers both. The SCALE strip has SCALE, ROOT and a one-octave keyboard lighting the scale's notes (click a key for the root). A double-click on a knob or a fader puts it back where the voice was when last saved (project opened, sent, dumped).

0.6.5: recall, always, ask first or never. Recalling the project's sound replaces what the OSCar plays, a sound just made on its panel and not stored included. So it is now a choice on the Setup page, kept on this computer: always, ask first (the default) or never. With ask first, the plugin's window asks when a project opens, or as soon as you open it: Recall the project's sound or Keep the OSCar's sound; nothing is sent until then. Recall now, next to it, sends the selected voice whole at any time.

0.6.4: the project's sound comes back, and waveforms received as they are. A new option on the Setup page, on by default: Recall the sound when the project opens. When a project opens, the OSCar gets the selected voice exactly as saved in the project, whatever its memories hold: all its values as CC, the tempo, and the user waveforms if the voice plays one. So a sound changed after the last save comes back as saved. Nothing is written into the OSCar's voice memories.

Waveforms dumped by the OSCar could be refused as "damaged by a text-mode copy (CR/LF)": some real harmonic levels read like that damage. Data straight from MIDI is never checked for it any more (only a copied file can be damaged that way), and the check on files is stricter, so it no longer mistakes such levels for damage.

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usu...

Read more

OXIde 0.7.4

Choose a tag to compare

@github-actions github-actions released this 16 Nov 23:56
d7c39dc

English

0.7.4: Listen on the OSCar. The plugin can't see the waveform chosen on the OSCar's panel, so after sending it could only rebuild the waveforms the voice plays in the plugin. A new button on the Waveforms page, Listen on the OSCar, sets Wave 1 of the voice to the waveform shown, sends the waveforms if they were edited, and makes the OSCar play it at once (Live CC on). When the voice plays no user waveform, sending now says what to do.

0.7.3: sent waveforms heard at once, for real. Vincent found that after sending the waveforms, the OSCar kept the old sound until the waveform was chosen again. Its firmware only rebuilds a user waveform when an oscillator's waveform number changes, so sending the same number again (0.7.2) did nothing. Now the oscillators that play a user waveform go to Triangle for a moment, then back (Live CC on, and in the sound recall). Without Live CC, the plugin says how to do it on the OSCar. The waveform buttons go from -12 to -8, left to right, as on the OSCar's keyboard and the memory row.

0.7.2: the Waveforms page, fixed with Vincent's tests. The five waveform buttons could not be clicked before a dump: they always can now. Without the OSCar's waveforms, the page says how to get them (INSERT + a WAVEFORM button + SPACE) or starts from five sines. The bars go up to 127 and the preview shows what the OSCar plays, computed the way its firmware does, in red where it saturates; Fit level scales a waveform so it just fits, as the OSCar does with its own, and sending offers it for the ones that saturate. After sending, Wave 1 and Wave 2 go again (Live CC on), so the OSCar rebuilds the waveform it plays: it only builds a user waveform when it is chosen.

0.7.1: RANDOM becomes SUPERMOD, and a SAVE button. SUPERMOD, since it does LFO waves as well as randoms: the button, its strip and the right-click menu now speak of modulations; projects keep their settings. New SAVE button, next to SUPERMOD, with two tabs. In the OSCar: pick a memory, Store in this memory sends the voice whole (SUPERMOD and MORPH hold meanwhile) and shows the keys to press on the OSCar, VOICE, STORE and the number, since no MIDI message can store a voice; Done and the plugin knows that memory holds it. Only that memory changes. Whole bank... still writes all 36. On the computer: save the voice, the bank or a .syx file, and open the folder.

0.7.0: RANDOM and SCALE, played from the bottom. RANDOM and SCALE leave the header: two buttons next to Live CC open their strips where the memories are. The RANDOM strip has SHAPE, a RATE knob with SYNC (a division of the DAW's tempo, or free from 10 s to 10 ms), LOOP (off, or 2 to 64 steps), New loop, MODE (bipolar or unipolar), ACTIVE and Clear all. A control turned up follows the shape as drawn, turned down upside down, whatever the shape; bipolar, it moves either side of its value, unipolar only on one side. Every control that moves lights up along its scale, all the time: a glowing arc from its own value to where it plays, with a bright tip (orange turned up, amber turned down); in the layer, a dim arc shows the whole range it sweeps. Right-click a knob, a fader or a switch: switch its random off (it is kept, its LED goes dark) or on again, remove it, go back to the saved value, or switch off or remove every random. ACTIVE off switches all of them off at once, amounts kept; the project remembers both. The SCALE strip has SCALE, ROOT and a one-octave keyboard lighting the scale's notes (click a key for the root). A double-click on a knob or a fader puts it back where the voice was when last saved (project opened, sent, dumped).

0.6.5: recall, always, ask first or never. Recalling the project's sound replaces what the OSCar plays, a sound just made on its panel and not stored included. So it is now a choice on the Setup page, kept on this computer: always, ask first (the default) or never. With ask first, the plugin's window asks when a project opens, or as soon as you open it: Recall the project's sound or Keep the OSCar's sound; nothing is sent until then. Recall now, next to it, sends the selected voice whole at any time.

0.6.4: the project's sound comes back, and waveforms received as they are. A new option on the Setup page, on by default: Recall the sound when the project opens. When a project opens, the OSCar gets the selected voice exactly as saved in the project, whatever its memories hold: all its values as CC, the tempo, and the user waveforms if the voice plays one. So a sound changed after the last save comes back as saved. Nothing is written into the OSCar's voice memories.

Waveforms dumped by the OSCar could be refused as "damaged by a text-mode copy (CR/LF)": some real harmonic levels read like that damage. Data straight from MIDI is never checked for it any more (only a copied file can be damaged that way), and the check on files is stricter, so it no longer mistakes such levels for damage.

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usual window, and installs there too. Before, the AU was left on the old version with "no permission to write".

0.5.1: a smooth display. Touching a button or turning a knob no longer redraws the whole window: only what changed is drawn again, and the fonts are loaded once instead of on every redraw. That ends the flicker and the labels that vanished on some Macs, and the interface follows the mouse much more closely.

Softer copper. The orange buttons and pads glow with a gentle gradient and a small halo, set in a dark bezel. On the Generator page, the big knob now shows its value in full besi...

Read more

OXIde 0.7.3

Choose a tag to compare

@github-actions github-actions released this 16 Nov 22:59
ce5bb30

English

0.7.3: sent waveforms heard at once, for real. Vincent found that after sending the waveforms, the OSCar kept the old sound until the waveform was chosen again. Its firmware only rebuilds a user waveform when an oscillator's waveform number changes, so sending the same number again (0.7.2) did nothing. Now the oscillators that play a user waveform go to Triangle for a moment, then back (Live CC on, and in the sound recall). Without Live CC, the plugin says how to do it on the OSCar. The waveform buttons go from -12 to -8, left to right, as on the OSCar's keyboard and the memory row.

0.7.2: the Waveforms page, fixed with Vincent's tests. The five waveform buttons could not be clicked before a dump: they always can now. Without the OSCar's waveforms, the page says how to get them (INSERT + a WAVEFORM button + SPACE) or starts from five sines. The bars go up to 127 and the preview shows what the OSCar plays, computed the way its firmware does, in red where it saturates; Fit level scales a waveform so it just fits, as the OSCar does with its own, and sending offers it for the ones that saturate. After sending, Wave 1 and Wave 2 go again (Live CC on), so the OSCar rebuilds the waveform it plays: it only builds a user waveform when it is chosen.

0.7.1: RANDOM becomes SUPERMOD, and a SAVE button. SUPERMOD, since it does LFO waves as well as randoms: the button, its strip and the right-click menu now speak of modulations; projects keep their settings. New SAVE button, next to SUPERMOD, with two tabs. In the OSCar: pick a memory, Store in this memory sends the voice whole (SUPERMOD and MORPH hold meanwhile) and shows the keys to press on the OSCar, VOICE, STORE and the number, since no MIDI message can store a voice; Done and the plugin knows that memory holds it. Only that memory changes. Whole bank... still writes all 36. On the computer: save the voice, the bank or a .syx file, and open the folder.

0.7.0: RANDOM and SCALE, played from the bottom. RANDOM and SCALE leave the header: two buttons next to Live CC open their strips where the memories are. The RANDOM strip has SHAPE, a RATE knob with SYNC (a division of the DAW's tempo, or free from 10 s to 10 ms), LOOP (off, or 2 to 64 steps), New loop, MODE (bipolar or unipolar), ACTIVE and Clear all. A control turned up follows the shape as drawn, turned down upside down, whatever the shape; bipolar, it moves either side of its value, unipolar only on one side. Every control that moves lights up along its scale, all the time: a glowing arc from its own value to where it plays, with a bright tip (orange turned up, amber turned down); in the layer, a dim arc shows the whole range it sweeps. Right-click a knob, a fader or a switch: switch its random off (it is kept, its LED goes dark) or on again, remove it, go back to the saved value, or switch off or remove every random. ACTIVE off switches all of them off at once, amounts kept; the project remembers both. The SCALE strip has SCALE, ROOT and a one-octave keyboard lighting the scale's notes (click a key for the root). A double-click on a knob or a fader puts it back where the voice was when last saved (project opened, sent, dumped).

0.6.5: recall, always, ask first or never. Recalling the project's sound replaces what the OSCar plays, a sound just made on its panel and not stored included. So it is now a choice on the Setup page, kept on this computer: always, ask first (the default) or never. With ask first, the plugin's window asks when a project opens, or as soon as you open it: Recall the project's sound or Keep the OSCar's sound; nothing is sent until then. Recall now, next to it, sends the selected voice whole at any time.

0.6.4: the project's sound comes back, and waveforms received as they are. A new option on the Setup page, on by default: Recall the sound when the project opens. When a project opens, the OSCar gets the selected voice exactly as saved in the project, whatever its memories hold: all its values as CC, the tempo, and the user waveforms if the voice plays one. So a sound changed after the last save comes back as saved. Nothing is written into the OSCar's voice memories.

Waveforms dumped by the OSCar could be refused as "damaged by a text-mode copy (CR/LF)": some real harmonic levels read like that damage. Data straight from MIDI is never checked for it any more (only a copied file can be damaged that way), and the check on files is stricter, so it no longer mistakes such levels for damage.

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usual window, and installs there too. Before, the AU was left on the old version with "no permission to write".

0.5.1: a smooth display. Touching a button or turning a knob no longer redraws the whole window: only what changed is drawn again, and the fonts are loaded once instead of on every redraw. That ends the flicker and the labels that vanished on some Macs, and the interface follows the mouse much more closely.

Softer copper. The orange buttons and pads glow with a gentle gradient and a small halo, set in a dark bezel. On the Generator page, the big knob now shows its value in full beside its name, prints the range above 75 % in orange, and Generate and the history buttons sit lower down; Previous and Next carry printed arrows.

0.5.0: OXIde. The plug-in is now called OXIde, with a new logo. Updating from inside the plug-in puts OXIde where OSCar Editor was and removes the old copies; your settings, banks, voices and backups move to Documents › OXIde. If both names end up side by side (after installing the disk image by...

Read more

OXIde 0.7.2

Choose a tag to compare

@github-actions github-actions released this 16 Nov 20:34
bf8f4b4

English

0.7.2: the Waveforms page, fixed with Vincent's tests. The five waveform buttons could not be clicked before a dump: they always can now. Without the OSCar's waveforms, the page says how to get them (INSERT + a WAVEFORM button + SPACE) or starts from five sines. The bars go up to 127 and the preview shows what the OSCar plays, computed the way its firmware does, in red where it saturates; Fit level scales a waveform so it just fits, as the OSCar does with its own, and sending offers it for the ones that saturate. After sending, Wave 1 and Wave 2 go again (Live CC on), so the OSCar rebuilds the waveform it plays: it only builds a user waveform when it is chosen.

0.7.1: RANDOM becomes SUPERMOD, and a SAVE button. SUPERMOD, since it does LFO waves as well as randoms: the button, its strip and the right-click menu now speak of modulations; projects keep their settings. New SAVE button, next to SUPERMOD, with two tabs. In the OSCar: pick a memory, Store in this memory sends the voice whole (SUPERMOD and MORPH hold meanwhile) and shows the keys to press on the OSCar, VOICE, STORE and the number, since no MIDI message can store a voice; Done and the plugin knows that memory holds it. Only that memory changes. Whole bank... still writes all 36. On the computer: save the voice, the bank or a .syx file, and open the folder.

0.7.0: RANDOM and SCALE, played from the bottom. RANDOM and SCALE leave the header: two buttons next to Live CC open their strips where the memories are. The RANDOM strip has SHAPE, a RATE knob with SYNC (a division of the DAW's tempo, or free from 10 s to 10 ms), LOOP (off, or 2 to 64 steps), New loop, MODE (bipolar or unipolar), ACTIVE and Clear all. A control turned up follows the shape as drawn, turned down upside down, whatever the shape; bipolar, it moves either side of its value, unipolar only on one side. Every control that moves lights up along its scale, all the time: a glowing arc from its own value to where it plays, with a bright tip (orange turned up, amber turned down); in the layer, a dim arc shows the whole range it sweeps. Right-click a knob, a fader or a switch: switch its random off (it is kept, its LED goes dark) or on again, remove it, go back to the saved value, or switch off or remove every random. ACTIVE off switches all of them off at once, amounts kept; the project remembers both. The SCALE strip has SCALE, ROOT and a one-octave keyboard lighting the scale's notes (click a key for the root). A double-click on a knob or a fader puts it back where the voice was when last saved (project opened, sent, dumped).

0.6.5: recall, always, ask first or never. Recalling the project's sound replaces what the OSCar plays, a sound just made on its panel and not stored included. So it is now a choice on the Setup page, kept on this computer: always, ask first (the default) or never. With ask first, the plugin's window asks when a project opens, or as soon as you open it: Recall the project's sound or Keep the OSCar's sound; nothing is sent until then. Recall now, next to it, sends the selected voice whole at any time.

0.6.4: the project's sound comes back, and waveforms received as they are. A new option on the Setup page, on by default: Recall the sound when the project opens. When a project opens, the OSCar gets the selected voice exactly as saved in the project, whatever its memories hold: all its values as CC, the tempo, and the user waveforms if the voice plays one. So a sound changed after the last save comes back as saved. Nothing is written into the OSCar's voice memories.

Waveforms dumped by the OSCar could be refused as "damaged by a text-mode copy (CR/LF)": some real harmonic levels read like that damage. Data straight from MIDI is never checked for it any more (only a copied file can be damaged that way), and the check on files is stricter, so it no longer mistakes such levels for damage.

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usual window, and installs there too. Before, the AU was left on the old version with "no permission to write".

0.5.1: a smooth display. Touching a button or turning a knob no longer redraws the whole window: only what changed is drawn again, and the fonts are loaded once instead of on every redraw. That ends the flicker and the labels that vanished on some Macs, and the interface follows the mouse much more closely.

Softer copper. The orange buttons and pads glow with a gentle gradient and a small halo, set in a dark bezel. On the Generator page, the big knob now shows its value in full beside its name, prints the range above 75 % in orange, and Generate and the history buttons sit lower down; Previous and Next carry printed arrows.

0.5.0: OXIde. The plug-in is now called OXIde, with a new logo. Updating from inside the plug-in puts OXIde where OSCar Editor was and removes the old copies; your settings, banks, voices and backups move to Documents › OXIde. If both names end up side by side (after installing the disk image by hand, say), the plug-in offers to move the old ones to the Trash. In Logic, OXIde is under OSCarTools, and projects made with OSCar Editor open as before.

A Voice page that reads like a signal chart. The window is taller (1400 × 900 at 100 %). On the top floor, the sound: the wheels, then oscillators → mix → filter. Below, what shapes it: LFO, glide, triggering, arpeggiator, clock, and both envelopes side by side, the amplifier's last. Printed lines show the way: the audio path in orange along the titles, the modulations into ENV AMOUNT, LFO AMOUNT and the oscillators' pitch, and th...

Read more

OXIde 0.7.1

Choose a tag to compare

@github-actions github-actions released this 11 Nov 13:06
ddacea3

English

0.7.1: RANDOM becomes SUPERMOD, and a SAVE button. SUPERMOD, since it does LFO waves as well as randoms: the button, its strip and the right-click menu now speak of modulations; projects keep their settings. New SAVE button, next to SUPERMOD, with two tabs. In the OSCar: pick a memory, Store in this memory sends the voice whole (SUPERMOD and MORPH hold meanwhile) and shows the keys to press on the OSCar, VOICE, STORE and the number, since no MIDI message can store a voice; Done and the plugin knows that memory holds it. Only that memory changes. Whole bank... still writes all 36. On the computer: save the voice, the bank or a .syx file, and open the folder.

0.7.0: RANDOM and SCALE, played from the bottom. RANDOM and SCALE leave the header: two buttons next to Live CC open their strips where the memories are. The RANDOM strip has SHAPE, a RATE knob with SYNC (a division of the DAW's tempo, or free from 10 s to 10 ms), LOOP (off, or 2 to 64 steps), New loop, MODE (bipolar or unipolar), ACTIVE and Clear all. A control turned up follows the shape as drawn, turned down upside down, whatever the shape; bipolar, it moves either side of its value, unipolar only on one side. Every control that moves lights up along its scale, all the time: a glowing arc from its own value to where it plays, with a bright tip (orange turned up, amber turned down); in the layer, a dim arc shows the whole range it sweeps. Right-click a knob, a fader or a switch: switch its random off (it is kept, its LED goes dark) or on again, remove it, go back to the saved value, or switch off or remove every random. ACTIVE off switches all of them off at once, amounts kept; the project remembers both. The SCALE strip has SCALE, ROOT and a one-octave keyboard lighting the scale's notes (click a key for the root). A double-click on a knob or a fader puts it back where the voice was when last saved (project opened, sent, dumped).

0.6.5: recall, always, ask first or never. Recalling the project's sound replaces what the OSCar plays, a sound just made on its panel and not stored included. So it is now a choice on the Setup page, kept on this computer: always, ask first (the default) or never. With ask first, the plugin's window asks when a project opens, or as soon as you open it: Recall the project's sound or Keep the OSCar's sound; nothing is sent until then. Recall now, next to it, sends the selected voice whole at any time.

0.6.4: the project's sound comes back, and waveforms received as they are. A new option on the Setup page, on by default: Recall the sound when the project opens. When a project opens, the OSCar gets the selected voice exactly as saved in the project, whatever its memories hold: all its values as CC, the tempo, and the user waveforms if the voice plays one. So a sound changed after the last save comes back as saved. Nothing is written into the OSCar's voice memories.

Waveforms dumped by the OSCar could be refused as "damaged by a text-mode copy (CR/LF)": some real harmonic levels read like that damage. Data straight from MIDI is never checked for it any more (only a copied file can be damaged that way), and the check on files is stricter, so it no longer mistakes such levels for damage.

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usual window, and installs there too. Before, the AU was left on the old version with "no permission to write".

0.5.1: a smooth display. Touching a button or turning a knob no longer redraws the whole window: only what changed is drawn again, and the fonts are loaded once instead of on every redraw. That ends the flicker and the labels that vanished on some Macs, and the interface follows the mouse much more closely.

Softer copper. The orange buttons and pads glow with a gentle gradient and a small halo, set in a dark bezel. On the Generator page, the big knob now shows its value in full beside its name, prints the range above 75 % in orange, and Generate and the history buttons sit lower down; Previous and Next carry printed arrows.

0.5.0: OXIde. The plug-in is now called OXIde, with a new logo. Updating from inside the plug-in puts OXIde where OSCar Editor was and removes the old copies; your settings, banks, voices and backups move to Documents › OXIde. If both names end up side by side (after installing the disk image by hand, say), the plug-in offers to move the old ones to the Trash. In Logic, OXIde is under OSCarTools, and projects made with OSCar Editor open as before.

A Voice page that reads like a signal chart. The window is taller (1400 × 900 at 100 %). On the top floor, the sound: the wheels, then oscillators → mix → filter. Below, what shapes it: LFO, glide, triggering, arpeggiator, clock, and both envelopes side by side, the amplifier's last. Printed lines show the way: the audio path in orange along the titles, the modulations into ENV AMOUNT, LFO AMOUNT and the oscillators' pitch, and the filter envelope's DELAY from Sustain to Release. On each row, every name and every value readout sits at the same height.

  • The waveforms are knobs with the panel's positions (N, ramp, square, pulse, PWM, off); waveforms −3 to −12 show their number under the knob.
  • Function, glide type and filter type are six-position knobs, as on the panel: the last three, under an arc, are HOLD, FIX and NO TRACK.
  • The keyboard octave has its five LEDs. The envelopes are faders again, four side by side for each.
  • The ARP column holds Function, Direction and Mode; the CLOCK column holds Sync, the external trigger divide and the tempo.

*The other pages use the extra height...

Read more

OXIde 0.7.0

Choose a tag to compare

@github-actions github-actions released this 11 Nov 09:35
0308467

English

0.7.0: RANDOM and SCALE, played from the bottom. RANDOM and SCALE leave the header: two buttons next to Live CC open their strips where the memories are. The RANDOM strip has SHAPE, a RATE knob with SYNC (a division of the DAW's tempo, or free from 10 s to 10 ms), LOOP (off, or 2 to 64 steps), New loop, MODE (bipolar or unipolar), ACTIVE and Clear all. A control turned up follows the shape as drawn, turned down upside down, whatever the shape; bipolar, it moves either side of its value, unipolar only on one side. Every control that moves lights up along its scale, all the time: a glowing arc from its own value to where it plays, with a bright tip (orange turned up, amber turned down); in the layer, a dim arc shows the whole range it sweeps. Right-click a knob, a fader or a switch: switch its random off (it is kept, its LED goes dark) or on again, remove it, go back to the saved value, or switch off or remove every random. ACTIVE off switches all of them off at once, amounts kept; the project remembers both. The SCALE strip has SCALE, ROOT and a one-octave keyboard lighting the scale's notes (click a key for the root). A double-click on a knob or a fader puts it back where the voice was when last saved (project opened, sent, dumped).

0.6.5: recall, always, ask first or never. Recalling the project's sound replaces what the OSCar plays, a sound just made on its panel and not stored included. So it is now a choice on the Setup page, kept on this computer: always, ask first (the default) or never. With ask first, the plugin's window asks when a project opens, or as soon as you open it: Recall the project's sound or Keep the OSCar's sound; nothing is sent until then. Recall now, next to it, sends the selected voice whole at any time.

0.6.4: the project's sound comes back, and waveforms received as they are. A new option on the Setup page, on by default: Recall the sound when the project opens. When a project opens, the OSCar gets the selected voice exactly as saved in the project, whatever its memories hold: all its values as CC, the tempo, and the user waveforms if the voice plays one. So a sound changed after the last save comes back as saved. Nothing is written into the OSCar's voice memories.

Waveforms dumped by the OSCar could be refused as "damaged by a text-mode copy (CR/LF)": some real harmonic levels read like that damage. Data straight from MIDI is never checked for it any more (only a copied file can be damaged that way), and the check on files is stricter, so it no longer mistakes such levels for damage.

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usual window, and installs there too. Before, the AU was left on the old version with "no permission to write".

0.5.1: a smooth display. Touching a button or turning a knob no longer redraws the whole window: only what changed is drawn again, and the fonts are loaded once instead of on every redraw. That ends the flicker and the labels that vanished on some Macs, and the interface follows the mouse much more closely.

Softer copper. The orange buttons and pads glow with a gentle gradient and a small halo, set in a dark bezel. On the Generator page, the big knob now shows its value in full beside its name, prints the range above 75 % in orange, and Generate and the history buttons sit lower down; Previous and Next carry printed arrows.

0.5.0: OXIde. The plug-in is now called OXIde, with a new logo. Updating from inside the plug-in puts OXIde where OSCar Editor was and removes the old copies; your settings, banks, voices and backups move to Documents › OXIde. If both names end up side by side (after installing the disk image by hand, say), the plug-in offers to move the old ones to the Trash. In Logic, OXIde is under OSCarTools, and projects made with OSCar Editor open as before.

A Voice page that reads like a signal chart. The window is taller (1400 × 900 at 100 %). On the top floor, the sound: the wheels, then oscillators → mix → filter. Below, what shapes it: LFO, glide, triggering, arpeggiator, clock, and both envelopes side by side, the amplifier's last. Printed lines show the way: the audio path in orange along the titles, the modulations into ENV AMOUNT, LFO AMOUNT and the oscillators' pitch, and the filter envelope's DELAY from Sustain to Release. On each row, every name and every value readout sits at the same height.

  • The waveforms are knobs with the panel's positions (N, ramp, square, pulse, PWM, off); waveforms −3 to −12 show their number under the knob.
  • Function, glide type and filter type are six-position knobs, as on the panel: the last three, under an arc, are HOLD, FIX and NO TRACK.
  • The keyboard octave has its five LEDs. The envelopes are faders again, four side by side for each.
  • The ARP column holds Function, Direction and Mode; the CLOCK column holds Sync, the external trigger divide and the tempo.

The other pages use the extra height: a larger morph preview, the generator's controls in the middle of their columns, a taller user guide on the Setup page.

Also new since 0.3.0

  • Morph A ↔ B: a page with two voices and an Octatrack-style crossfader. Knobs glide from A to B, switches change half way; Smoothing turns a sudden move into a glide. With Live CC the OSCar follows live, the plug-in only sending the CC that changed. Keep the blend or Undo it in one step; the fader can be automated in Logic (Morph A-B).
  • Init: a plain starting sound to build a voice from scratch (Banks page, and at the top of the voice menu).
  • Memories in the keyboard's order: -12 … -1, then 1 … 24, as on th...
Read more

OXIde 0.6.3

Choose a tag to compare

@github-actions github-actions released this 10 Nov 23:15
dc2e368

English

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usual window, and installs there too. Before, the AU was left on the old version with "no permission to write".

0.5.1: a smooth display. Touching a button or turning a knob no longer redraws the whole window: only what changed is drawn again, and the fonts are loaded once instead of on every redraw. That ends the flicker and the labels that vanished on some Macs, and the interface follows the mouse much more closely.

Softer copper. The orange buttons and pads glow with a gentle gradient and a small halo, set in a dark bezel. On the Generator page, the big knob now shows its value in full beside its name, prints the range above 75 % in orange, and Generate and the history buttons sit lower down; Previous and Next carry printed arrows.

0.5.0: OXIde. The plug-in is now called OXIde, with a new logo. Updating from inside the plug-in puts OXIde where OSCar Editor was and removes the old copies; your settings, banks, voices and backups move to Documents › OXIde. If both names end up side by side (after installing the disk image by hand, say), the plug-in offers to move the old ones to the Trash. In Logic, OXIde is under OSCarTools, and projects made with OSCar Editor open as before.

A Voice page that reads like a signal chart. The window is taller (1400 × 900 at 100 %). On the top floor, the sound: the wheels, then oscillators → mix → filter. Below, what shapes it: LFO, glide, triggering, arpeggiator, clock, and both envelopes side by side, the amplifier's last. Printed lines show the way: the audio path in orange along the titles, the modulations into ENV AMOUNT, LFO AMOUNT and the oscillators' pitch, and the filter envelope's DELAY from Sustain to Release. On each row, every name and every value readout sits at the same height.

  • The waveforms are knobs with the panel's positions (N, ramp, square, pulse, PWM, off); waveforms −3 to −12 show their number under the knob.
  • Function, glide type and filter type are six-position knobs, as on the panel: the last three, under an arc, are HOLD, FIX and NO TRACK.
  • The keyboard octave has its five LEDs. The envelopes are faders again, four side by side for each.
  • The ARP column holds Function, Direction and Mode; the CLOCK column holds Sync, the external trigger divide and the tempo.

The other pages use the extra height: a larger morph preview, the generator's controls in the middle of their columns, a taller user guide on the Setup page.

Also new since 0.3.0

  • Morph A ↔ B: a page with two voices and an Octatrack-style crossfader. Knobs glide from A to B, switches change half way; Smoothing turns a sudden move into a glide. With Live CC the OSCar follows live, the plug-in only sending the CC that changed. Keep the blend or Undo it in one step; the fader can be automated in Logic (Morph A-B).
  • Init: a plain starting sound to build a voice from scratch (Banks page, and at the top of the voice menu).
  • Memories in the keyboard's order: -12 … -1, then 1 … 24, as on the OSCar's keys.
  • The panel's own words and scales: OSC 1 WAVEFORM, DE TUNE, OSC BALANCE, Q, SEPARATION, PITCH MOD, TRIGGERING, GATE TIME… with − / 0 / + on the bipolar knobs. They stay in English in French mode, as on the synth.
  • A panel with a past: the printed ink is lightly worn in places; the controls stay clean.

Français

0.6.3 : Passer sur le canal, et des traits à travers les harmoniques. Quand l'OSCar émet sur un autre canal MIDI, un bouton Passer sur le canal apparaît à gauche de l'afficheur : un clic et le plugin prend le canal de l'OSCar. (Le canal de l'OSCar lui-même ne se règle que sur l'OSCar, SPACE + une touche de 1 à 16 : son firmware n'accepte aucun message MIDI pour ça.) Dans la page Formes d'onde, un trait rapide à travers les bandes dessine maintenant toutes celles qu'il traverse, sur la ligne entre les deux, et va jusqu'à la première et la dernière bande quand la souris les dépasse.

0.6.2 : un morphing plus sûr et plus simple. La page Morphing a un interrupteur MORPH, éteint au démarrage : éteint, le crossfader et son automation dans le DAW ne font rien. Allumé, l'OSCar joue le mélange de A et B (en CC, avec Live CC) et plus aucune voix ne change : Garder le mélange l'écrit dans la voix choisie, en une seule étape d'annulation. Les retouches de A ou de B s'entendent tout de suite dans le mélange. Éteindre MORPH, choisir une autre voix ou en générer une rend à l'OSCar la voix choisie ; l'afficheur indique MORPH EN COURS entre-temps. Chaque côté n'a plus qu'un afficheur : un clic ouvre la liste, la voix choisie en tête, et la voix prise dans la liste est chargée (MORPH allumé, le son glisse vers elle). Plus de flèches, ni de boutons Voix choisie et Charger.

0.6.1 : l'OSCar sur un autre canal. Quand l'OSCar émet sur un autre canal MIDI que le plugin (SPACE + une touche de 1 à 16 sur l'OSCar le change, facilement sans le vouloir, et la carte Tauntek le garde après extinction), l'afficheur indique OSCAR CANAL et son numéro, et un message explique comment le remettre. Sauf en omni, l'OSCar n'entend alors pas le plugin.

0.6.0 : RANDOM et SCALE. Deux nouvelles fonctions en haut de la fenêtre, comme dans MIFM1. RANDOM allumé, tourner un potard ou une tirette de la page Voix règle combien il bouge au lieu de sa valeur (Transpose, Osc 2 Interval et Octave Shift aussi). Ce qu'il suit se choisit juste à côté, tout au même endroit : SHAPE, S&H (une nouvelle valeur à chaque pas : vers le haut, de nouvelles valeurs ; vers le bas, des valeurs qui reviennent les mêmes à chaque boucle), SMOOTH (un glissem...

Read more

OXIde 0.6.0

Choose a tag to compare

@github-actions github-actions released this 10 Nov 21:23
3dddd6a

English

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usual window, and installs there too. Before, the AU was left on the old version with "no permission to write".

0.5.1: a smooth display. Touching a button or turning a knob no longer redraws the whole window: only what changed is drawn again, and the fonts are loaded once instead of on every redraw. That ends the flicker and the labels that vanished on some Macs, and the interface follows the mouse much more closely.

Softer copper. The orange buttons and pads glow with a gentle gradient and a small halo, set in a dark bezel. On the Generator page, the big knob now shows its value in full beside its name, prints the range above 75 % in orange, and Generate and the history buttons sit lower down; Previous and Next carry printed arrows.

0.5.0: OXIde. The plug-in is now called OXIde, with a new logo. Updating from inside the plug-in puts OXIde where OSCar Editor was and removes the old copies; your settings, banks, voices and backups move to Documents › OXIde. If both names end up side by side (after installing the disk image by hand, say), the plug-in offers to move the old ones to the Trash. In Logic, OXIde is under OSCarTools, and projects made with OSCar Editor open as before.

A Voice page that reads like a signal chart. The window is taller (1400 × 900 at 100 %). On the top floor, the sound: the wheels, then oscillators → mix → filter. Below, what shapes it: LFO, glide, triggering, arpeggiator, clock, and both envelopes side by side, the amplifier's last. Printed lines show the way: the audio path in orange along the titles, the modulations into ENV AMOUNT, LFO AMOUNT and the oscillators' pitch, and the filter envelope's DELAY from Sustain to Release. On each row, every name and every value readout sits at the same height.

  • The waveforms are knobs with the panel's positions (N, ramp, square, pulse, PWM, off); waveforms −3 to −12 show their number under the knob.
  • Function, glide type and filter type are six-position knobs, as on the panel: the last three, under an arc, are HOLD, FIX and NO TRACK.
  • The keyboard octave has its five LEDs. The envelopes are faders again, four side by side for each.
  • The ARP column holds Function, Direction and Mode; the CLOCK column holds Sync, the external trigger divide and the tempo.

The other pages use the extra height: a larger morph preview, the generator's controls in the middle of their columns, a taller user guide on the Setup page.

Also new since 0.3.0

  • Morph A ↔ B: a page with two voices and an Octatrack-style crossfader. Knobs glide from A to B, switches change half way; Smoothing turns a sudden move into a glide. With Live CC the OSCar follows live, the plug-in only sending the CC that changed. Keep the blend or Undo it in one step; the fader can be automated in Logic (Morph A-B).
  • Init: a plain starting sound to build a voice from scratch (Banks page, and at the top of the voice menu).
  • Memories in the keyboard's order: -12 … -1, then 1 … 24, as on the OSCar's keys.
  • The panel's own words and scales: OSC 1 WAVEFORM, DE TUNE, OSC BALANCE, Q, SEPARATION, PITCH MOD, TRIGGERING, GATE TIME… with − / 0 / + on the bipolar knobs. They stay in English in French mode, as on the synth.
  • A panel with a past: the printed ink is lightly worn in places; the controls stay clean.

Français

0.6.0 : RANDOM et SCALE. Deux nouvelles fonctions en haut de la fenêtre, comme dans MIFM1. RANDOM allumé, tourner un potard ou une tirette de la page Voix règle combien il bouge au lieu de sa valeur (Transpose, Osc 2 Interval et Octave Shift aussi). Ce qu'il suit se choisit juste à côté, tout au même endroit : SHAPE, S&H (une nouvelle valeur à chaque pas : vers le haut, de nouvelles valeurs ; vers le bas, des valeurs qui reviennent les mêmes à chaque boucle), SMOOTH (un glissement d'une valeur au hasard à la suivante, en boucle aussi vers le bas) ou une des ondes des LFO de MIFM1 (sinus, triangle, dent de scie, rampe, carré, pump, escalier, rebond, clave, montées, descentes, zigzag : un seul LFO pour toutes les commandes, à l'envers vers le bas) ; RATE, de 1/32 à 16 mesures, sur le tempo et les mesures du DAW ; LOOP, n'importe quelle longueur de 2 à 64 pas. Plus loin, plus large ; au milieu (ou double-clic), rien, et la commande retrouve sa valeur. RANDOM à nouveau, les potards se tournent comme d'habitude : une petite LED marque chaque commande qui bouge (rouge : vers le haut, ambre : vers le bas). Clic droit sur RANDOM : le tempo sans DAW, nouvelles boucles, tout effacer. Les ondes et les glissements partent au fil des valeurs, 400 CC par seconde au plus. La voix elle-même ne change pas : l'OSCar reçoit les valeurs en CC (Live CC), et les projets enregistrés gardent les aléatoires et leurs boucles. SCALE et ROOT mettent Transpose et Osc 2 Interval sur une gamme (majeur, mineur, les modes, mineur harmonique et mélodique, pentatoniques, blues, par tons, hirajoshi, phrygien dominant), leurs aléatoires aussi, et ramènent dans la gamme les notes jouées par MIDI Thru.

0.5.5 : une plaque de drive plus franche. La plaque du Filter Drive passe à un orange plus vif avec un liseré sombre, et elle descend maintenant jusque sous l'afficheur de valeur, qu'elle englobe. La LED ambrée du drive est retirée.

0.5.4 : de la lumière sur le filtre. Une fine bande LED suit la course du grand potard Frequency : elle s'allume jusqu'à la coupure et brille de plus en plus quand le filtre s'ouvre. Le potard Filter Drive est posé sur une plaque orange, graduations et nom imprimés en défonce, avec une LED ambrée qui s'allume de plus en plus quand on monte le drive.

0.5.3 : Charger A, Charger B, et une icône. Sur la page Morphing, choisir une voix pour A ou B ne change plus le mélange : la voix attend que tu appuies sur Charger (sa LED s'allume pendant l'attente), et le fader ne saute plus vers une voix que tu ne faisais que parcourir. Si un mélange est en cours quand tu charges, le son glisse vers le nouveau couple à la position du fader, sur la durée du lissage. Chaque côté affiche la voix chargée. Et OXIde a son icône : un pad de cuivre allumé, dans le Dock, le Finder et sur le site.

0.5.2 : mises à jour dans les dossiers protégés. Quand le plugin a été installé avec ton mot de passe (l'AU dans /Library/Audio/Plug-Ins/Components, depuis l'image disque), la mise à jour demande maintenant ce mot de passe une fois, dans la fenêtre habituelle de macOS, et installe là aussi. Avant, l'AU restait sur l'ancienne version avec « pas le droit d'écrire ».

0.5.1 : un affichage fluide. Toucher un bouton ou tourner un potard ne redessine plus toute la fenêtre : seul ce qui a changé est redessiné, et les polices sont chargées une seule fois au lieu de l'être à chaque affichage. Fini le clignotement et les textes qui disparaissaient sur certains Mac, et l'interface suit la souris de beaucoup plus près.

Un cuivre plus doux. Les boutons et pads orange s'allument avec un dégradé tout en douceur et un petit halo, dans un cadre sombre. Sur la page Générateur, le grand potard affiche sa valeur en entier à côté de son nom, la plage au-delà de 75 % est imprimée en orange, Générer et les bouto...

Read more