Skip to content

OXIde 0.6.3

Choose a tag to compare

@github-actions github-actions released this 10 Nov 23:15
dc2e368

English

0.6.3: Use channel, and strokes across the harmonics. When the OSCar sends on another MIDI channel, a Use channel button appears left of the voice display: one click and the plugin takes the OSCar's channel. (The OSCar's own channel can only be set on the OSCar, SPACE + a key from 1 to 16: its firmware takes no MIDI message for it.) On the Waveforms page, a quick stroke across the bands now draws every band it crosses, on the line between, and carries on to the first and last band when the mouse runs past them.

0.6.2: a safer, simpler Morph. The Morph page has a MORPH switch, off at start: off, the crossfader and its DAW automation do nothing. On, the OSCar plays the blend of A and B (as CC, Live CC on) and no voice changes any more: Keep the blend writes it into the selected voice, in one undo step. Edits of A or B are heard in the blend at once. Turning MORPH off, choosing another voice or generating one gives the OSCar the selected voice back; the display shows MORPH ON meanwhile. Each end has a single window: a click opens the list, with the selected voice first, and the voice chosen there is loaded (with MORPH on, the sound glides to it). The arrows, Selected voice and Load buttons are gone.

0.6.1: the OSCar on another channel. When the OSCar sends on a MIDI channel other than the plugin's (SPACE + a key from 1 to 16 on the OSCar changes it, easily by mistake, and the Tauntek board keeps it after power-off), the display shows OSCAR ON CH and its number, and a message says how to put it back. Unless it is in omni mode, the OSCar doesn't hear the plugin then.

0.6.0: RANDOM and SCALE. Two new functions at the top of the window, as in MIFM1. With RANDOM lit, turning a knob or a fader on the Voice page sets how much it moves instead of its value (Transpose, Osc 2 Interval and Octave Shift too). What it follows is chosen next to it, all in one place: SHAPE, S&H (a new value at each step: up, new values; down, values that come back the same every loop), SMOOTH (gliding from one random value to the next, looped too when turned down) or one of MIFM1's LFO waves (sine, triangle, saw, ramp, square, pump, stairs, bounce, clave, rises, falls, zigzag: one LFO for every control, upside down when turned down); RATE, from 1/32 to 16 bars, on the DAW's tempo and bars; LOOP, any length from 2 to 64 steps. The further, the wider; back to the middle (or a double-click), none, and the control gets its own value back. Press RANDOM again to turn the knobs as usual: a small LED marks each control that moves (red: up, amber: down). Right-click on RANDOM: the tempo without a DAW, new loops, clear them all. The waves and glides go out as the values change, at most 400 CC a second. The voice itself never changes: the OSCar gets the values as CC (Live CC), and saved projects keep the randoms and their loops. SCALE and ROOT put Transpose and Osc 2 Interval on a scale (major, minor, the modes, harmonic and melodic minor, pentatonics, blues, whole tone, hirajoshi, phrygian dominant), their randoms too, and move the notes played through MIDI Thru to the scale.

0.5.5: a bolder drive plate. The Filter Drive plate is a deeper, livelier orange with a dark rim, and it now runs from above the knob to below its value window, which sits inside it. The amber drive LED is gone.

0.5.4: lights on the filter. A thin LED band runs along the travel of the big Frequency knob: it lights up to the cutoff and glows brighter as the filter opens. The Filter Drive knob sits on an orange plate, its scale and name printed in reverse, with an amber LED that glows harder as you add drive.

0.5.3: Load A, Load B, and an icon. On the Morph page, choosing a voice for A or B no longer changes the blend: the voice waits until you press Load (its LED lights while it waits), so the fader never jumps to a voice you were only browsing. If a blend is going on when you load, the sound glides to the new pair at the fader's position, over the smoothing time. Each side shows which voice is loaded. And OXIde has its own icon: a glowing copper pad, in the Dock, the Finder and on the web page.

0.5.2: updates into protected folders. When the plug-in was installed with your password (the AU in /Library/Audio/Plug-Ins/Components, from the disk image), the update now asks macOS for that password once, in its usual window, and installs there too. Before, the AU was left on the old version with "no permission to write".

0.5.1: a smooth display. Touching a button or turning a knob no longer redraws the whole window: only what changed is drawn again, and the fonts are loaded once instead of on every redraw. That ends the flicker and the labels that vanished on some Macs, and the interface follows the mouse much more closely.

Softer copper. The orange buttons and pads glow with a gentle gradient and a small halo, set in a dark bezel. On the Generator page, the big knob now shows its value in full beside its name, prints the range above 75 % in orange, and Generate and the history buttons sit lower down; Previous and Next carry printed arrows.

0.5.0: OXIde. The plug-in is now called OXIde, with a new logo. Updating from inside the plug-in puts OXIde where OSCar Editor was and removes the old copies; your settings, banks, voices and backups move to Documents › OXIde. If both names end up side by side (after installing the disk image by hand, say), the plug-in offers to move the old ones to the Trash. In Logic, OXIde is under OSCarTools, and projects made with OSCar Editor open as before.

A Voice page that reads like a signal chart. The window is taller (1400 × 900 at 100 %). On the top floor, the sound: the wheels, then oscillators → mix → filter. Below, what shapes it: LFO, glide, triggering, arpeggiator, clock, and both envelopes side by side, the amplifier's last. Printed lines show the way: the audio path in orange along the titles, the modulations into ENV AMOUNT, LFO AMOUNT and the oscillators' pitch, and the filter envelope's DELAY from Sustain to Release. On each row, every name and every value readout sits at the same height.

  • The waveforms are knobs with the panel's positions (N, ramp, square, pulse, PWM, off); waveforms −3 to −12 show their number under the knob.
  • Function, glide type and filter type are six-position knobs, as on the panel: the last three, under an arc, are HOLD, FIX and NO TRACK.
  • The keyboard octave has its five LEDs. The envelopes are faders again, four side by side for each.
  • The ARP column holds Function, Direction and Mode; the CLOCK column holds Sync, the external trigger divide and the tempo.

The other pages use the extra height: a larger morph preview, the generator's controls in the middle of their columns, a taller user guide on the Setup page.

Also new since 0.3.0

  • Morph A ↔ B: a page with two voices and an Octatrack-style crossfader. Knobs glide from A to B, switches change half way; Smoothing turns a sudden move into a glide. With Live CC the OSCar follows live, the plug-in only sending the CC that changed. Keep the blend or Undo it in one step; the fader can be automated in Logic (Morph A-B).
  • Init: a plain starting sound to build a voice from scratch (Banks page, and at the top of the voice menu).
  • Memories in the keyboard's order: -12 … -1, then 1 … 24, as on the OSCar's keys.
  • The panel's own words and scales: OSC 1 WAVEFORM, DE TUNE, OSC BALANCE, Q, SEPARATION, PITCH MOD, TRIGGERING, GATE TIME… with − / 0 / + on the bipolar knobs. They stay in English in French mode, as on the synth.
  • A panel with a past: the printed ink is lightly worn in places; the controls stay clean.

Français

0.6.3 : Passer sur le canal, et des traits à travers les harmoniques. Quand l'OSCar émet sur un autre canal MIDI, un bouton Passer sur le canal apparaît à gauche de l'afficheur : un clic et le plugin prend le canal de l'OSCar. (Le canal de l'OSCar lui-même ne se règle que sur l'OSCar, SPACE + une touche de 1 à 16 : son firmware n'accepte aucun message MIDI pour ça.) Dans la page Formes d'onde, un trait rapide à travers les bandes dessine maintenant toutes celles qu'il traverse, sur la ligne entre les deux, et va jusqu'à la première et la dernière bande quand la souris les dépasse.

0.6.2 : un morphing plus sûr et plus simple. La page Morphing a un interrupteur MORPH, éteint au démarrage : éteint, le crossfader et son automation dans le DAW ne font rien. Allumé, l'OSCar joue le mélange de A et B (en CC, avec Live CC) et plus aucune voix ne change : Garder le mélange l'écrit dans la voix choisie, en une seule étape d'annulation. Les retouches de A ou de B s'entendent tout de suite dans le mélange. Éteindre MORPH, choisir une autre voix ou en générer une rend à l'OSCar la voix choisie ; l'afficheur indique MORPH EN COURS entre-temps. Chaque côté n'a plus qu'un afficheur : un clic ouvre la liste, la voix choisie en tête, et la voix prise dans la liste est chargée (MORPH allumé, le son glisse vers elle). Plus de flèches, ni de boutons Voix choisie et Charger.

0.6.1 : l'OSCar sur un autre canal. Quand l'OSCar émet sur un autre canal MIDI que le plugin (SPACE + une touche de 1 à 16 sur l'OSCar le change, facilement sans le vouloir, et la carte Tauntek le garde après extinction), l'afficheur indique OSCAR CANAL et son numéro, et un message explique comment le remettre. Sauf en omni, l'OSCar n'entend alors pas le plugin.

0.6.0 : RANDOM et SCALE. Deux nouvelles fonctions en haut de la fenêtre, comme dans MIFM1. RANDOM allumé, tourner un potard ou une tirette de la page Voix règle combien il bouge au lieu de sa valeur (Transpose, Osc 2 Interval et Octave Shift aussi). Ce qu'il suit se choisit juste à côté, tout au même endroit : SHAPE, S&H (une nouvelle valeur à chaque pas : vers le haut, de nouvelles valeurs ; vers le bas, des valeurs qui reviennent les mêmes à chaque boucle), SMOOTH (un glissement d'une valeur au hasard à la suivante, en boucle aussi vers le bas) ou une des ondes des LFO de MIFM1 (sinus, triangle, dent de scie, rampe, carré, pump, escalier, rebond, clave, montées, descentes, zigzag : un seul LFO pour toutes les commandes, à l'envers vers le bas) ; RATE, de 1/32 à 16 mesures, sur le tempo et les mesures du DAW ; LOOP, n'importe quelle longueur de 2 à 64 pas. Plus loin, plus large ; au milieu (ou double-clic), rien, et la commande retrouve sa valeur. RANDOM à nouveau, les potards se tournent comme d'habitude : une petite LED marque chaque commande qui bouge (rouge : vers le haut, ambre : vers le bas). Clic droit sur RANDOM : le tempo sans DAW, nouvelles boucles, tout effacer. Les ondes et les glissements partent au fil des valeurs, 400 CC par seconde au plus. La voix elle-même ne change pas : l'OSCar reçoit les valeurs en CC (Live CC), et les projets enregistrés gardent les aléatoires et leurs boucles. SCALE et ROOT mettent Transpose et Osc 2 Interval sur une gamme (majeur, mineur, les modes, mineur harmonique et mélodique, pentatoniques, blues, par tons, hirajoshi, phrygien dominant), leurs aléatoires aussi, et ramènent dans la gamme les notes jouées par MIDI Thru.

0.5.5 : une plaque de drive plus franche. La plaque du Filter Drive passe à un orange plus vif avec un liseré sombre, et elle descend maintenant jusque sous l'afficheur de valeur, qu'elle englobe. La LED ambrée du drive est retirée.

0.5.4 : de la lumière sur le filtre. Une fine bande LED suit la course du grand potard Frequency : elle s'allume jusqu'à la coupure et brille de plus en plus quand le filtre s'ouvre. Le potard Filter Drive est posé sur une plaque orange, graduations et nom imprimés en défonce, avec une LED ambrée qui s'allume de plus en plus quand on monte le drive.

0.5.3 : Charger A, Charger B, et une icône. Sur la page Morphing, choisir une voix pour A ou B ne change plus le mélange : la voix attend que tu appuies sur Charger (sa LED s'allume pendant l'attente), et le fader ne saute plus vers une voix que tu ne faisais que parcourir. Si un mélange est en cours quand tu charges, le son glisse vers le nouveau couple à la position du fader, sur la durée du lissage. Chaque côté affiche la voix chargée. Et OXIde a son icône : un pad de cuivre allumé, dans le Dock, le Finder et sur le site.

0.5.2 : mises à jour dans les dossiers protégés. Quand le plugin a été installé avec ton mot de passe (l'AU dans /Library/Audio/Plug-Ins/Components, depuis l'image disque), la mise à jour demande maintenant ce mot de passe une fois, dans la fenêtre habituelle de macOS, et installe là aussi. Avant, l'AU restait sur l'ancienne version avec « pas le droit d'écrire ».

0.5.1 : un affichage fluide. Toucher un bouton ou tourner un potard ne redessine plus toute la fenêtre : seul ce qui a changé est redessiné, et les polices sont chargées une seule fois au lieu de l'être à chaque affichage. Fini le clignotement et les textes qui disparaissaient sur certains Mac, et l'interface suit la souris de beaucoup plus près.

Un cuivre plus doux. Les boutons et pads orange s'allument avec un dégradé tout en douceur et un petit halo, dans un cadre sombre. Sur la page Générateur, le grand potard affiche sa valeur en entier à côté de son nom, la plage au-delà de 75 % est imprimée en orange, Générer et les boutons d'historique sont plus bas, et Précédent et Suivant ont des flèches.

0.5.0 : OXIde. Le plugin s'appelle maintenant OXIde, avec un nouveau logo. La mise à jour depuis le plugin met OXIde à la place d'OSCar Editor et retire les anciennes copies ; tes réglages, banques, voix et sauvegardes passent dans Documents › OXIde. Si les deux noms se retrouvent côte à côte (après une installation à la main depuis l'image disque, par exemple), le plugin propose de mettre les anciens à la corbeille. Dans Logic, OXIde est rangé sous OSCarTools, et les projets faits avec OSCar Editor s'ouvrent comme avant.

Une page Voix qui se lit comme un schéma. La fenêtre est plus haute (1400 × 900 à 100 %). À l'étage du haut, le son : les molettes, puis oscillateurs → mix → filtre. En bas, ce qui le façonne : LFO, glide, triggering, arpégiateur, horloge, et les deux enveloppes côte à côte, celle de l'ampli en dernier. Des lignes imprimées montrent le chemin : le son en orange le long des titres, les modulations vers ENV AMOUNT, LFO AMOUNT et la hauteur des oscillateurs, et le DELAY de l'enveloppe du filtre, de Sustain à Release. Sur chaque rangée, tous les noms et tous les afficheurs de valeur sont à la même hauteur.

  • Les formes d'onde sont des potards avec les positions de la façade (N, rampe, carré, impulsion, PWM, off) ; les formes −3 à −12 affichent leur numéro sous le potard.
  • Function, le type de glide et le type de filtre sont des potards à six positions, comme sur la façade : les trois dernières, sous un arc, sont HOLD, FIX et NO TRACK.
  • L'octave du clavier a ses cinq LED. Les enveloppes repassent en tirettes, quatre côte à côte pour chacune.
  • La colonne ARP réunit Function, Direction et Mode ; la colonne CLOCK réunit Sync, la division d'horloge externe et le tempo.

Les autres pages profitent de la hauteur : un aperçu de morphing plus grand, les commandes du générateur au milieu de leurs colonnes, un mode d'emploi plus haut dans Réglages.

Aussi nouveau depuis la 0.3.0

  • Morphing A ↔ B : une page avec deux voix et un crossfader façon Octatrack. Les potards glissent de A vers B, les sélecteurs basculent à mi-course ; le lissage transforme un geste brusque en glissement. Avec Live CC, l'OSCar suit en direct, le plugin n'envoyant que les CC qui ont changé. Garde le mélange ou annule-le d'un coup ; le fader s'automatise dans Logic (Morph A-B).
  • Init : un son de départ neutre pour construire une voix à partir de zéro (page Banques, et en haut du menu des voix).
  • Les mémoires dans l'ordre du clavier : -12 … -1, puis 1 … 24, comme sur les touches de l'OSCar.
  • Les mots et les graduations de la façade : OSC 1 WAVEFORM, DE TUNE, OSC BALANCE, Q, SEPARATION, PITCH MOD, TRIGGERING, GATE TIME… avec − / 0 / + sur les potards bipolaires. Ils restent en anglais en mode français, comme sur le synthé.
  • Une façade qui a vécu : l'encre est légèrement usée par endroits ; les commandes restent intactes.