Skip to content

Releases

Looper 1.1.0

Choose a tag to compare

@drj-io drj-io released this 13 Nov 08:25

Looper by Slow Ops is a three-bank stereo looper for Akai MPC standalone. It captures 1, 2, 4 or 8 bars from a track in time with the MPC. You can overdub, start and stop banks on the beat, and use the built-in metronome.

The LOOPS page on an MPC XL with two banks playing

Upgrading from 1.0: restart the MPC

The plugin is now called Looper. In 1.0 the MPC cut its name down to "Slow .ooper".

  1. Delete the old Slow Ops - VST - Slow Ops Looper folder from VST2 Plugins, then copy in the new Slow Ops - VST - Looper folder from the zip.
  2. Restart the MPC, or refresh its plugin list. Until you do, the MPC may keep showing the old name, or not find the plugin at all.
  3. If a saved project shows the plugin as missing, add Looper to that insert slot again. Its settings go back to the defaults.

What's new since 1.0.0

  • New name: Looper. It shows in full in the FX slot, under "Slow Ops".
  • Master STOP stops everything. The metronome goes quiet, the beat boxes hold on 1, and a capture that is counting in or recording is cancelled. The next master PLAY starts it all again from bar 1. The metronome now clicks while the looper is playing, with or without the MPC transport.
  • The bank dial turns while you record. A 4-bar capture shows 1/4, 2/4, 3/4, 4/4 as it records, then follows playback.
  • Cleaner re-recording. When you capture again into a bank that is playing (Next Bar), the old loop plays through the count-in, stops when recording starts, and the new loop comes in at full level on its first beat.
  • No more clipped first beat. A freshly recorded loop now starts with its first downbeat intact. Before, it started a few milliseconds late and faded in.
  • Auto Standby wakes up for a re-take. Re-recording your first loop with Next Bar, with no other loops, switches the metronome from Standby to On for the count-in and the recording, then back to Standby.
  • Play Timing defaults to Loop End. PLAY/STOP taps wait for each bank's loop to come round. Immediate and Bar End are still on the MIX page.

Install (new users)

  1. Download Looper-1.1.0-mpc-sdk.zip below and unzip it.
  2. Copy the folder Slow Ops - VST - Looper into a folder named VST2 Plugins at the top level of a USB drive, an SD card or the MPC's internal drive.
  3. On the MPC (MPC OS 3.10.1 or later), open Preferences → Enhancements (Beta) and switch on Enable Enhancements and External Plugin Support.
  4. Add Looper (Slow Ops, under External Plugins) as an insert on a track.

The user guide has the details. The -mpc-armv7 and -mpc-aarch64 zips hold the same build, packaged for the open-mpc Plugin Manager and installers; a manual install doesn't need them.

Known limits

  • Loops are not saved with the project. Resample the track to keep them.
  • Tested on an MPC XL and an MPC Live III, both running MPC OS 3.10.1. The download also includes a 32-bit build for the older standalone MPCs and Force, which hasn't been tried on a device yet.
  • This is a third-party plugin, not supported by Akai.

Slow Ops Looper 1.0.0

Choose a tag to compare

@drj-io drj-io released this 13 Nov 06:20

A three-bank stereo looper for Akai MPC standalone. It sits as an insert effect on a track and captures 1, 2, 4 or 8 bars in time with the MPC. You can overdub, start and stop banks on the beat, and use the built-in metronome.

The LOOPS page on an MPC XL with two banks playing

Download and install

  1. Download slow-ops-looper-1.0.0-mpc.zip below and unzip it.
  2. Copy the folder Slow Ops - VST - Slow Ops Looper into a folder named VST2 Plugins at the top level of a USB drive, an SD card or the MPC's internal drive.
  3. On the MPC (MPC OS 3.10.1 or later), open Preferences → Enhancements (Beta) and switch on Enable Enhancements and External Plugin Support.
  4. Add Slow Ops Looper (under External Plugins) as an insert on a track.

The zip includes INSTALL.txt and a README.md user guide.

What's in 1.0

  • Three loop banks. Each captures 1, 2, 4 or 8 bars, in one of three Capture Modes: Last Bar, Rolling or Next Bar.
  • Overdub in three Play Modes: Freeze, On Demand or Continuous. At the default 100 % Feedback, layers stack without fading.
  • PLAY/STOP for each bank and a master PLAY/STOP that follows the MPC transport. Play Timing sets whether taps act Immediately, at Bar End or at Loop End.
  • Solo, mute, volume and clear for each bank, and Clear All.
  • A metronome (Off / On / Standby) that works while the transport is stopped. With Auto Standby, it goes quiet once your first loop is captured.
  • Latency compensation (default 12 ms) to keep loops on the beat, and a Monitor switch for when the MPC already monitors your input.
  • Tone, Drift and Mix.

Known limits

  • Loops are not saved with the project. Resample the track to keep them.
  • Tested only on an MPC XL running MPC OS 3.10.1.
  • This is a third-party plugin, not supported by Akai.