Skip to content

Slow Ops Looper 1.0.0

Choose a tag to compare

@drj-io drj-io released this 13 Nov 06:20

A three-bank stereo looper for Akai MPC standalone. It sits as an insert effect on a track and captures 1, 2, 4 or 8 bars in time with the MPC. You can overdub, start and stop banks on the beat, and use the built-in metronome.

The LOOPS page on an MPC XL with two banks playing

Download and install

  1. Download slow-ops-looper-1.0.0-mpc.zip below and unzip it.
  2. Copy the folder Slow Ops - VST - Slow Ops Looper into a folder named VST2 Plugins at the top level of a USB drive, an SD card or the MPC's internal drive.
  3. On the MPC (MPC OS 3.10.1 or later), open Preferences → Enhancements (Beta) and switch on Enable Enhancements and External Plugin Support.
  4. Add Slow Ops Looper (under External Plugins) as an insert on a track.

The zip includes INSTALL.txt and a README.md user guide.

What's in 1.0

  • Three loop banks. Each captures 1, 2, 4 or 8 bars, in one of three Capture Modes: Last Bar, Rolling or Next Bar.
  • Overdub in three Play Modes: Freeze, On Demand or Continuous. At the default 100 % Feedback, layers stack without fading.
  • PLAY/STOP for each bank and a master PLAY/STOP that follows the MPC transport. Play Timing sets whether taps act Immediately, at Bar End or at Loop End.
  • Solo, mute, volume and clear for each bank, and Clear All.
  • A metronome (Off / On / Standby) that works while the transport is stopped. With Auto Standby, it goes quiet once your first loop is captured.
  • Latency compensation (default 12 ms) to keep loops on the beat, and a Monitor switch for when the MPC already monitors your input.
  • Tone, Drift and Mix.

Known limits

  • Loops are not saved with the project. Resample the track to keep them.
  • Tested only on an MPC XL running MPC OS 3.10.1.
  • This is a third-party plugin, not supported by Akai.