code does not work properly on ESP32-eye #35
Description
hi,
I've tried using other versions, such as ESP32 to 2.x, or ESP32CAM to 2.6, and the problem persists.
Library version: 2.7.7
Arduino IDE: 1.8.19
ESP32: 3.0.0
Hardware: ESP32-S3-EYE
Issue: Successfully burned the example (take_picture), but the microcontroller keeps rebooting. Below is the serial output information.
11:39:07.308 -> [ 3746][V][esp32-hal-uart.c:408] uartBegin(): UART0 baud(115200) Mode(800001c) rxPin(44) txPin(43)
11:39:07.308 -> [ 3755][V][esp32-hal-uart.c:497] uartBegin(): UART0 not installed. Starting installation
11:39:07.308 -> [ 3763][V][esp32-hal-uart.c:544] uartBegin(): UART0 initialization done.
11:39:07.354 -> ESP-ROM:esp32s3-20210327
11:39:07.354 -> Build:Mar 27 2021
11:39:07.354 -> rst:0xc (RTC_SW_CPU_RST),boot:0x2a (SPI_FAST_FLASH_BOOT)
11:39:07.354 -> Saved PC:0x4037695d
11:39:07.354 -> SPIWP:0xee
11:39:07.354 -> mode:DIO, clock div:1
11:39:07.354 -> load:0x3fce3818,len:0x508
11:39:07.354 -> load:0x403c9700,len:0x4
11:39:07.354 -> load:0x403c9704,len:0xad0
11:39:07.354 -> load:0x403cc700,len:0x29e4
11:39:07.354 -> entry 0x403c9880
11:39:07.542 -> [ 215][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x42005f60
11:39:07.589 -> [ 226][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42005f2c
11:39:07.589 -> [ 238][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42005ef8
11:39:07.589 -> [ 249][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x42005ec4
11:39:07.589 -> [ 260][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x42005f60
11:39:07.589 -> [ 272][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42005f2c
11:39:07.636 -> [ 283][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42005ef8
11:39:07.636 -> [ 294][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x42005ec4
11:39:07.636 -> [ 306][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x42005f60
11:39:07.636 -> [ 317][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42005f2c
11:39:07.683 -> [ 328][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42005ef8
11:39:07.683 -> [ 339][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x42005ec4
11:39:07.683 -> [ 352][I][esp32-hal-psram.c:90] psramInit(): PSRAM enabled
11:39:07.730 -> [ 373][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 44 successfully set to type UART_RX (2) with bus 0x3fc93300
11:39:07.730 -> [ 384][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 43 successfully set to type UART_TX (3) with bus 0x3fc93300
11:39:07.730 -> =========== Before Setup Start ===========
11:39:07.730 -> Chip Info:
11:39:07.730 -> ------------------------------------------
11:39:07.730 -> Model : ESP32-S3
11:39:07.730 -> Package : 0
11:39:07.730 -> Revision : 2
11:39:07.730 -> Cores : 2
11:39:07.730 -> Frequency : 240 MHz
11:39:07.776 -> Embedded Flash : No
11:39:07.776 -> Embedded PSRAM : No
11:39:07.776 -> 2.4GHz WiFi : Yes
11:39:07.776 -> Classic BT : No
11:39:07.776 -> BT Low Energy : Yes
11:39:07.776 -> IEEE 802.15.4 : No
11:39:07.776 -> ------------------------------------------
11:39:07.776 -> INTERNAL Memory Info:
11:39:07.776 -> ------------------------------------------
11:39:07.776 -> Total Size : 211156 B ( 206.2 KB)
11:39:07.776 -> Free Bytes : 177416 B ( 173.3 KB)
11:39:07.776 -> Allocated Bytes : 26228 B ( 25.6 KB)
11:39:07.776 -> Minimum Free Bytes: 172228 B ( 168.2 KB)
11:39:07.776 -> Largest Free Block: 139252 B ( 136.0 KB)
11:39:07.776 -> ------------------------------------------
11:39:07.823 -> SPIRAM Memory Info:
11:39:07.823 -> ------------------------------------------
11:39:07.823 -> Total Size : 8388608 B (8192.0 KB)
11:39:07.823 -> Free Bytes : 8385672 B (8189.1 KB)
11:39:07.823 -> Allocated Bytes : 576 B ( 0.6 KB)
11:39:07.823 -> Minimum Free Bytes: 8385672 B (8189.1 KB)
11:39:07.823 -> Largest Free Block: 8257524 B (8064.0 KB)
11:39:07.823 -> Bus Mode : OPI
11:39:07.823 -> ------------------------------------------
11:39:07.823 -> Flash Info:
11:39:07.823 -> ------------------------------------------
11:39:07.823 -> Chip Size : 8388608 B (8 MB)
11:39:07.823 -> Block Size : 65536 B ( 64.0 KB)
11:39:07.871 -> Sector Size : 4096 B ( 4.0 KB)
11:39:07.871 -> Page Size : 256 B ( 0.2 KB)
11:39:07.871 -> Bus Speed : 80 MHz
11:39:07.871 -> Bus Mode : QIO
11:39:07.871 -> ------------------------------------------
11:39:07.871 -> Partitions Info:
11:39:07.871 -> ------------------------------------------
11:39:07.871 -> nvs : addr: 0x00009000, size: 20.0 KB, type: DATA, subtype: NVS
11:39:07.871 -> otadata : addr: 0x0000E000, size: 8.0 KB, type: DATA, subtype: OTA
11:39:07.871 -> app0 : addr: 0x00010000, size: 3264.0 KB, type: APP, subtype: OTA_0
11:39:07.918 -> app1 : addr: 0x00340000, size: 3264.0 KB, type: APP, subtype: OTA_1
11:39:07.918 -> spiffs : addr: 0x00670000, size: 1536.0 KB, type: DATA, subtype: SPIFFS
11:39:07.918 -> coredump : addr: 0x007F0000, size: 64.0 KB, type: DATA, subtype: COREDUMP
11:39:07.918 -> ------------------------------------------
11:39:07.918 -> Software Info:
11:39:07.918 -> ------------------------------------------
11:39:07.918 -> Compile Date/Time : Jun 5 2024 11:33:27
11:39:07.918 -> Compile Host OS : windows
11:39:07.918 -> ESP-IDF Version : v5.1.4-51-g442a798083-dirty
11:39:07.918 -> Arduino Version : 3.0.0
11:39:07.918 -> ------------------------------------------
11:39:07.963 -> Board Info:
11:39:07.963 -> ------------------------------------------
11:39:07.963 -> Arduino Board : ESP32S3_DEV
11:39:07.963 -> Arduino Variant : esp32s3
11:39:07.963 -> Arduino FQBN : esp32:esp32:esp32s3:JTAGAdapter=default,PSRAM=opi,FlashMode=qio,FlashSize=8M,LoopCore=1,EventsCore=1,USBMode=hwcdc,CDCOnBoot=default,MSCOnBoot=default,DFUOnBoot=default,UploadMode=default,PartitionScheme=default_8MB,CPUFreq=240,UploadSpeed=921600,DebugLevel=verbose,EraseFlash=none,ZigbeeMode=default
11:39:07.963 -> ============ Before Setup End ============
11:39:11.095 -> [ 3746][V][esp32-hal-uart.c:408] uartBegin(): UART0 baud(115200) Mode(800001c) rxPin(44) txPin(43)
11:39:11.095 -> [ 3755][V][esp32-hal-uart.c:497] uartBegin(): UART0 not installed. Starting installation
11:39:11.095 -> [ 3763][V][esp32-hal-uart.c:544] uartBegin(): UART0 initialization done.
11:39:11.095 -> ESP-ROM:esp32s3-20210327
11:39:11.095 -> Build:Mar 27 2021
11:39:11.095 -> rst:0xc (RTC_SW_CPU_RST),boot:0x2a (SPI_FAST_FLASH_BOOT)
11:39:11.095 -> Saved PC:0x4037695d
11:39:11.095 -> SPIWP:0xee
11:39:11.095 -> mode:DIO, clock div:1
11:39:11.095 -> load:0x3fce3818,len:0x508
11:39:11.142 -> load:0x403c9700,len:0x4
11:39:11.142 -> load:0x403c9704,len:0xad0
11:39:11.142 -> load:0x403cc700,len:0x29e4
11:39:11.142 -> entry 0x403c9880
11:39:11.330 -> [ 215][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x42005f60
11:39:11.330 -> [ 226][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42005f2c
11:39:11.330 -> [ 238][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42005ef8
11:39:11.376 -> [ 249][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x42005ec4
11:39:11.376 -> [ 260][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x42005f60
11:39:11.376 -> [ 272][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42005f2c
11:39:11.376 -> [ 283][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42005ef8
11:39:11.423 -> [ 294][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x42005ec4
11:39:11.423 -> [ 306][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x42005f60
11:39:11.423 -> [ 317][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x42005f2c
11:39:11.423 -> [ 328][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x42005ef8
11:39:11.470 -> [ 339][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x42005ec4
11:39:11.470 -> [ 352][I][esp32-hal-psram.c:90] psramInit(): PSRAM enabled
11:39:11.470 -> [ 373][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 44 successfully set to type UART_RX (2) with bus 0x3fc93300
11:39:11.517 -> [ 384][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 43 successfully set to type UART_TX (3) with bus 0x3fc93300
11:39:11.517 -> =========== Before Setup Start ===========
11:39:11.517 -> Chip Info:
11:39:11.517 -> ------------------------------------------
11:39:11.517 -> Model : ESP32-S3
11:39:11.517 -> Package : 0
11:39:11.517 -> Revision : 2
11:39:11.517 -> Cores : 2
11:39:11.517 -> Frequency : 240 MHz
11:39:11.517 -> Embedded Flash : No
11:39:11.517 -> Embedded PSRAM : No
11:39:11.517 -> 2.4GHz WiFi : Yes
11:39:11.517 -> Classic BT : No
11:39:11.517 -> BT Low Energy : Yes
11:39:11.517 -> IEEE 802.15.4 : No
11:39:11.564 -> ------------------------------------------
11:39:11.564 -> INTERNAL Memory Info:
11:39:11.564 -> ------------------------------------------
11:39:11.564 -> Total Size : 211156 B ( 206.2 KB)
11:39:11.564 -> Free Bytes : 177416 B ( 173.3 KB)
11:39:11.564 -> Allocated Bytes : 26228 B ( 25.6 KB)
11:39:11.564 -> Minimum Free Bytes: 172228 B ( 168.2 KB)
11:39:11.564 -> Largest Free Block: 139252 B ( 136.0 KB)
11:39:11.564 -> ------------------------------------------
11:39:11.564 -> SPIRAM Memory Info:
11:39:11.564 -> ------------------------------------------
11:39:11.564 -> Total Size : 8388608 B (8192.0 KB)
11:39:11.564 -> Free Bytes : 8385672 B (8189.1 KB)
11:39:11.611 -> Allocated Bytes : 576 B ( 0.6 KB)
11:39:11.611 -> Minimum Free Bytes: 8385672 B (8189.1 KB)
11:39:11.611 -> Largest Free Block: 8257524 B (8064.0 KB)
11:39:11.611 -> Bus Mode : OPI
11:39:11.611 -> ------------------------------------------
11:39:11.611 -> Flash Info:
11:39:11.611 -> ------------------------------------------
11:39:11.611 -> Chip Size : 8388608 B (8 MB)
11:39:11.611 -> Block Size : 65536 B ( 64.0 KB)
11:39:11.611 -> Sector Size : 4096 B ( 4.0 KB)
11:39:11.611 -> Page Size : 256 B ( 0.2 KB)
11:39:11.611 -> Bus Speed : 80 MHz
11:39:11.611 -> Bus Mode : QIO
11:39:11.611 -> ------------------------------------------
11:39:11.658 -> Partitions Info:
11:39:11.658 -> ------------------------------------------
11:39:11.658 -> nvs : addr: 0x00009000, size: 20.0 KB, type: DATA, subtype: NVS
11:39:11.658 -> otadata : addr: 0x0000E000, size: 8.0 KB, type: DATA, subtype: OTA
11:39:11.658 -> app0 : addr: 0x00010000, size: 3264.0 KB, type: APP, subtype: OTA_0
11:39:11.658 -> app1 : addr: 0x00340000, size: 3264.0 KB, type: APP, subtype: OTA_1
11:39:11.658 -> spiffs : addr: 0x00670000, size: 1536.0 KB, type: DATA, subtype: SPIFFS
11:39:11.705 -> coredump : addr: 0x007F0000, size: 64.0 KB, type: DATA, subtype: COREDUMP
11:39:11.705 -> ------------------------------------------
11:39:11.705 -> Software Info:
11:39:11.705 -> ------------------------------------------
11:39:11.705 -> Compile Date/Time : Jun 5 2024 11:33:27
11:39:11.705 -> Compile Host OS : windows
11:39:11.705 -> ESP-IDF Version : v5.1.4-51-g442a798083-dirty
11:39:11.705 -> Arduino Version : 3.0.0
11:39:11.705 -> ------------------------------------------
11:39:11.705 -> Board Info:
11:39:11.705 -> ------------------------------------------
11:39:11.705 -> Arduino Board : ESP32S3_DEV
11:39:11.705 -> Arduino Variant : esp32s3
11:39:11.752 -> Arduino FQBN : esp32:esp32:esp32s3:JTAGAdapter=default,PSRAM=opi,FlashMode=qio,FlashSize=8M,LoopCore=1,EventsCore=1,USBMode=hwcdc,CDCOnBoot=default,MSCOnBoot=default,DFUOnBoot=default,UploadMode=default,PartitionScheme=default_8MB,CPUFreq=240,UploadSpeed=921600,DebugLevel=verbose,EraseFlash=none,ZigbeeMode=default
11:39:11.752 -> ============ Before Setup End ============
11:39:14.868 -> [ 3746][V][esp32-hal-uart.c:408] uartBegin(): UART0 baud(115200) Mode(800001c) rxPin(44) txPin(43)
11:39:14.868 -> [ 3755][V][esp32-hal-uart.c:497] uartBegin(): UART0 not installed. Starting installation
11:39:14.868 -> [ 3763][V][esp32-hal-uart.c:544] uartBegin(): UART0 initialization done.