ESP32S3 Start Debugging does not work in Arduino IDE 2.3.6

[Voljka1]

Board

Waveshare ESP32-S3-ETH (ESP32S3 Dev Module also)

Device Description

I used real board, selected&connected to PC (ESP32-S3-ETH) and ESP32S3 Dev Module, just selected, but not connected.

Hardware Configuration

n/a

Version

v3.3.2

Type

Question

IDE Name

Arduino IDE

Operating System

Windows 11

Flash frequency

80Mhz

PSRAM enabled

yes

Upload speed

921600

Description

Windows 11, Arduino IDE 2.3.6, ESP32 Core 3.3.2. Open Blank sketch, select ESP32S3 Dev Module, press Start Debugging button.
IDE shows error: Error getting Debug info: Unknown FQBN: platform esp32:esp32 is not installed.
Same error for Waveshare ESP32-S3-ETH board (boards.local.txt) what was created on base from ESP32S3 Dev Module.
openocd -f share/openocd/scripts/board/esp32s3-builtin.cfg runs fine, no issues.

Sketch

Blank sketch.

Debug Message

Error getting Debug info: Unknown FQBN: platform esp32:esp32 is not installed.

Other Steps to Reproduce

No response

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

[Voljka1]

i installed Arduino CLI, configured ARDUINO_CONFIG_FILE= to point to customized IDE config file, so both IDE and CLI may use same data folders, and, suddenly, debugging start working. How, why, where was the problem?
P.S. I moved all heavy data folders to disk d: from their default places, so without this variable build-in cli was using default paths and can not find esp32 package. At least this explanation give me Grok.