Skip to content

QuickStartGuide

Jump to bottom Edit New page
Olivier LAHAYE edited this page Apr 25, 2019 · 66 revisions

Quick start guide for SystemImager v5 pre

Requirements

Configurations

  • /etc/systemimager/systemimager.conf => Check if all default values suit your needs and filesystem hierarchy is correct.

  • DHCP

    • /usr/sbin/si_mkdhcpserver => This will produce a /etc/dhcp/dhcpd.conf file. Check it and tweak it for your needs, then restart the dhcpd service on systemd: systemctl restart dhcpd.service on init.d: service dhcpd restart

  • PXE

    • /usr/sbin/si_mkbootserver
    • Check that you have at least a correct entry in the <tftpdir>/pxelinux.cfg/default => example:
LABEL sisCO7
   MENU DEFAULT
   MENU LABEL ^7 - Install an OSCAR Node using CentOS7 imager
   KERNEL CO7-kernel
   APPEND initrd=CO7-initrd.img si.skip-local-cfg=yes si.image-server=10.0.2.2 si.monitor-server=10.0.0.2 si.monitor-console=yes si.post-action=directboot ramdisk_blocksize=1024 ramdisk_size=128000 acpi=no noapic vga=795 splash quiet rd.vconsole.keymap=fr

  • Rsync

    • si_mkrsyncd_conf (you should have /etc/systemimager/rsync_stubs/40<yourimagename> created, /etc/systemimager/rsyncd.conf updated and rsync daemon running the systemimager rsync configuration.)

  • Systemimager parameters: => SystemImager supports multiple ways to specify parameters.

    • DHCP options traditional way, but it only supports few parameters: image-server, log-server-port, ssh-download-url, flamethrower-directory-port-base and tmpfs-staging

    • PXE cmdline just like any dracut based initramfs, systemimager supports cmdline parameters all starting with the "si." prefix. => see SystemImager imager parameters.

    • configs directory: /var/lib/systemimager/scripts/configs/ it contains files with systemimager variables similar to local.cfg except that it's not local ;-) The file is retreived once network is established. it is either specified using the si.config= PXE cmdline parameter or if a ${IMAGENAME}.conf exists in this directory, then it is read. example: see template

    • disks-layouts directory: /var/lib/systemimager/scripts/disks-layouts It contains files with disks layout and bootloader infos in xml format. man autoinstallscript.conf for description of format. example (complex one) To verify file concistency: si_lint --disks-layout=<you disk layout file.xml>

    • network-configs directory: /var/lib/systemimager/scripts/network-configs It contains files with client network configurations in xml format. man <not yet written> for description of format. example: (complex one) To verify file concistency: si_lint --network-config=<you network config file.xml>

    • local.cfg (deprecated but still supported) Same as above except it is read from old hard drive or from a floppy (USB stick will be supported later). example: /usr/share/doc/systemimager-server/local.cfg

Creating the image (2 methods)

  • Using golden client and si_getimage On client: install systemimager-client (yum -y install systemimager-client) then issue the following command: si_prepareclient --server <hostname or ip of your systemimager server> Then, on server do: si_getimage --golden-client <you golden client> --image <image-name> --post-install=directboot

  • Using mksiimage from systeminstaller-oscar package mksiimage --name --filename /usr/share/oscar/oscarsamples/pkglists/centos-7-x86_64.pkglist

Deploying the image

  • Prerequisites:
    • dhcp server is up and running
    • rsyncd is up and running
    • an image exists in /var/lib/systemimager/images/<imagename>
    • a disk layout exists in /var/lib/systemimager/scripts/disks-layouts/<name>.xml You can validate it using the following command: si_lint --disks-layout=<name>.xml
    • an optional (though recommanded) network configuration exists in /var/lib/systemimager/scripts/network-configs/<name>.xml You can validate it using the following command: si_lint --network-config=<name>.xml (Note: the file format is not final yet eventhough it's already near final v1)
    • at least si.config= is set in pxe cmdline and a /var/lib/systemimager/scripts/configs/<name>.conf exists and has $IMAGENAME set or si.image-name= is set in pxe cmdline
    • no firewall blocks rsync and other systemimager ports
  • boot the client using PXE (usually, if PXE boot is not default, pressing F12 at bios boot enables PXE boot). In PXE menu, choose the appropriate entry you've defined. It should load systemimager imager initramfs.
    • steps performed by the imager:
      • parse cmdline parameters (defined in PXE kernel cmdline)
      • runs pre-install scripts if any
      • format disk (and mount partitions to /sysroot)
      • runs main-install if one is defined or if a script name matches hostname
      • download image to disk
      • install any mdraid or/and lvm configs in imaged system
      • configures the client network
      • installs the bootloader
      • runs post-install scripts
      • Unmount /sysroot and its dependancies
      • execute post imaging action (either wait, reboot, shutdown of finish booting if modules installed on client match imager kernel).

Monitoring the deployment

  • si_monitor_tk

    Runs this command from server to see imaging progress and see remotely what the console prints on the client being imaged (requires an X11 display).

More

  • recreating a new systemimager boot initrd can be done using si_mkbootpackage (can be useful when a new kernel or new firmwares are made available by distro).

SystemImager.org

SystemImager logo

Clone this wiki locally