Commandline administration

Solving various problems on the commandline.

Setting location

# uci set gluon-node-info.@location[0].latitude=53.834470
# uci set gluon-node-info.@location[0].longitude=10.702518
# uci set gluon-node-info.@location[0].share_location=1
# uci commit gluon-node-info

Check settings:

# uci show gluon-node-info
gluon-node-info.@location[0]=location
gluon-node-info.@location[0].share_location=1
gluon-node-info.@location[0].latitude=53.834470
gluon-node-info.@location[0].longitude=10.702518

Setting contact

# uci set gluon-node-info.@owner[0]=owner
# uci set gluon-node-info.@owner[0].contact=example@example.com
# uci commit gluon-node-info

Check settings:

# uci show gluon-node-info
....
gluon-node-info.@owner[0]=owner
gluon-node-info.@owner[0].contact=Luftloch

Enabling fastd

# uci set fastd.mesh_vpn.enabled=1
# uci commit fastd
# /etc/init.d/fastd generate_key mesh_vpn
18fa75d1808692f04770bedf30c42dac24585d331560c545d70dd27f22a05648

Set existing fastd private key

# uci set fastd.mesh_vpn.enabled=1
# uci set fastd.mesh_vpn.secret=18fa75d1808692f04770bedf30c42dac24585d331560c545d70dd27f22a05648
# uci commit fastd

Show fastd public key

# /etc/init.d/fastd show_key mesh_vpn
18fa75d1808692f04770bedf30c42dac24585d331560c545d70dd27f22a05648    

Enable mesh on WAN-Port

# uci set network.mesh_wan=interface
# uci set network.mesh_wan.ifname=br-wan
# uci set network.mesh_wan.proto=batadv
# uci set network.mesh_wan.mesh=bat0
# uci commit network

Change AutoUpdater Branch

# uci set autoupdater.settings.enabled=1
# uci set autoupdater.settings.branch=stable
# uci commit autoupdater
# autoupdater -f 

Reboot to configmode

# uci set gluon-config-mode.@wizard[0].enabled=1
# uci commit
# reboot

PoE passthrough on Nanostation M

echo 8 > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio8/direction
echo 1 > /sys/class/gpio/gpio8/value