Skip to content

Troubleshooting

Jump to bottom
Griffen Fargo edited this page May 18, 2026 · 4 revisions

Troubleshooting

Common issues and how to fix them.

Common Pitfalls

The four issues most likely to bite you. Read this section first.

./lightsctl.sh update doesn't deploy your code

Symptom: You pushed new code, ran ./lightsctl.sh update, hard-refreshed the browser — and the Pi is still running the old version.

Diagnosis: update only runs sudo apt update && apt upgrade on the Pi. It's an OS-package updater, not a code deployer. There is no git pull happening on the Pi.

Fix: Deploy from your workstation:

bash scripts/deploy.sh

This rsyncs control-server/, scripts/, and lightsctl.sh to the Pi and restarts lighting-control.service.

Stale UI after deploy

Symptom: Code deployed, service restarted, but the browser still shows the old layout / old colors / missing tab.

Diagnosis: The PWA service worker (and ordinary browser cache) is serving cached CSS and JS.

Fix: Hard refresh — ⌘⇧R (Mac) or Ctrl⇧R (Windows/Linux). On iOS Safari, close the tab and reopen, or use Settings → Safari → Advanced → Website Data to clear lights.local.

lighting-mcp: not installed on the Pi-health card

Symptom: The Diagnostics tab shows lighting-mcp: not installed in a muted/grey state.

Diagnosis: Expected behavior if you haven't installed the MCP server. As of v2.13.1, the diagnostics distinguish "not installed" (the systemd unit doesn't exist) from "inactive" (the unit exists but is stopped) — the former is muted, the latter is red.

Fix: Only install MCP if you actually want to drive the rig from Claude Desktop / ChatGPT / Cursor / a custom agent:

./lightsctl.sh mcp-install

If you're happy with the Chat tab in the web UI, leave it uninstalled.

Template changes not reflected after deploy

Symptom: You edited a Jinja template under control-server/templates/, ran bash scripts/deploy.sh, and the page still renders the old template.

Diagnosis: Flask caches templates in memory at process start. The deploy script restarts the service automatically, but if you rsynced manually you'll need to restart yourself.

Fix:

ssh lights.local 'sudo systemctl restart lighting-control'

(Or just use bash scripts/deploy.sh, which does this for you.)

Quick Diagnostics

Start with these commands to identify issues:

./lightsctl.sh doctor      # Full health check
./lightsctl.sh validate    # Pre-flight validation
./lightsctl.sh diagnose    # Detailed diagnostic dump

From an MCP Agent

If you've installed the MCP server (mcp-install), three diagnostic tools are available to any connected LLM client:

Tool What it checks
test_dmx Runs a known-good R → G → B sweep across every fixture's color channels and restores prior state. Visible confirmation that DMX is reaching the rig.
get_logs(service, n?) Tails the systemd journal for qlcplus-web, lighting-control, lighting-mcp, or nginx.
get_system_info() Pi-level health: CPU temperature, load, memory, disk, uptime, USB devices, service status.

Tell your agent "the lights aren't responding, what's wrong?" — it can call all three in sequence to triage without SSHing in.

ENTTEC Not Detected

Symptoms:

  • test-dmx command fails
  • No DMX output from fixtures
  • USB device not showing in lsusb

Solutions:

Verify USB Connection

./lightsctl.sh test-dmx
./lightsctl.sh lsusb

Check User Permissions

./lightsctl.sh ssh
groups $USER   # should include dialout

Replug Device

Unplug and replug the ENTTEC. If harden was run, it should appear at /dev/dmx0.

QLC+ Service Won't Start

Symptoms:

  • Web UI not accessible
  • Service status shows failed
  • Logs show Qt platform errors

Solutions:

Check Service Logs

./lightsctl.sh logs
./lightsctl.sh logs-errors

Fix Qt Platform Issues

./lightsctl.sh qlc-headless
./lightsctl.sh restart

Verify Installation

./lightsctl.sh doctor
./lightsctl.sh health

Can't Find Pi on Network

Symptoms:

  • lights.local doesn't resolve
  • SSH connection fails
  • Can't access web UI

Solutions:

Scan Network

./lightsctl.sh scan
./lightsctl.sh check

Check WiFi Configuration

Ensure WiFi credentials were set correctly during SD card preparation.

Try Direct IP

Check your router's DHCP leases to find the Pi's IP address, then update PI_HOST in .env.

Web UI Hangs or Doesn't Load

Symptoms:

  • Browser connects but page never loads
  • Spinning wheel forever
  • Interface unresponsive

Solutions:

Remove --operate Flag

./lightsctl.sh ssh
sudo sed -i 's/--operate//' /etc/systemd/system/qlcplus-web.service
sudo systemctl daemon-reload
sudo systemctl restart qlcplus-web

Restart Service

./lightsctl.sh restart
./lightsctl.sh health

Lights Not Responding

Symptoms:

  • DMX fixtures don't respond
  • Scenes don't affect lights
  • Everything else works

Solutions:

  1. Check Universe Output — In QLC+ web UI, go to Inputs/Outputs and ensure universe output is enabled
  2. Verify ENTTEC Selection — Confirm ENTTEC is selected as the output plugin for the correct universe
  3. Check DMX Addresses — Verify fixture DMX addresses in QLC+ match their physical DIP switch settings
  4. Test DMX Output:
./lightsctl.sh test-dmx

Still Having Issues?

Getting Started

Usage

Advanced

Clone this wiki locally