USB: omap_udc: DMA: Don't enable burst 4 mode

commit 3f91484 upstream.

Commit 6511108 ("USB: more omap_udc updates (dma and omap1710)")
added setting for DMA burst 4 mode. But I think this should be undone for
two reasons:

- It breaks DMA on 15xx boards - transfers just silently stall.

- On newer OMAP1 boards, like Nokia 770 (omap1710), there is no measurable
performance impact when testing TCP throughput with g_ether with large
15000 byte MTU size.

It's also worth noting that when the original change was made, the
OMAP_DMA_DATA_BURST_4 handling in arch/arm/plat-omap/dma.c was broken, and
actually resulted in the same as the OMAP_DMA_DATA_BURST_DIS i.e. burst
disabled. This was fixed not until a couple kernel releases later in an
unrelated commit 1a8bfa1 ("[ARM] 3142/1: OMAP 2/5: Update files
common to omap1 and omap2").

So based on this it seems there was never really a very good reason to
enable this burst mode in omap_udc, so remove it now to allow 15xx DMA
to work again (it provides 2x throughput compared to PIO mode).

Fixes: 6511108 ("[PATCH] USB: more omap_udc updates (dma and omap1710)")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/ad06qHLclWHeSGnV@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: aakoskin

drivers/usb/gadget/udc/omap_udc.c

@@ -732,8 +732,6 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 		if (status == 0) {
 			omap_writew(reg, UDC_TXDMA_CFG);
 			/* EMIFF or SDRC */
-			omap_set_dma_src_burst_mode(ep->lch,
-						OMAP_DMA_DATA_BURST_4);
 			omap_set_dma_src_data_pack(ep->lch, 1);
 			/* TIPB */
 			omap_set_dma_dest_params(ep->lch,
@@ -755,8 +753,6 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
 				UDC_DATA_DMA,
 				0, 0);
 			/* EMIFF or SDRC */
-			omap_set_dma_dest_burst_mode(ep->lch,
-						OMAP_DMA_DATA_BURST_4);
 			omap_set_dma_dest_data_pack(ep->lch, 1);
 		}
 	}