Skip to content

v2.16.0 — stable

Latest

Choose a tag to compare

@hypery11 hypery11 released this 14 Oct 03:07
f78d30a

v2.16.0 — stable

The first stable release since 2.14. It is the firmware of 2.16-beta.40, which testers ran on the M5Stack ATOM Lite, the Waveshare ESP32-S3 and the LilyGO T-2CAN, from Windows, Android, iOS and macOS (#223, #230). Nothing in the firmware changed after that build.

If you are on beta.37, beta.38 or beta.39, please update. Those builds can reboot the board while the dashboard is in use, which looks like the Wi-Fi dropping in a loop.

What 2.16 brings since 2.14

  • One protocol core for the Flipper and the ESP32, with a host test suite that gates every build.
  • Capture tooling. Flipper CAN Capture, full-rate single-ID and multi-ID captures with hardware filters on the ESP32, self-labelling captures (?meta=1), loadable .cantest send profiles.
  • Field-Readiness (#127). Black-box incident recorder, tap capability checker, DAS variant auto-profiles.
  • 2026.14.x nag and steer-jerk work. ESP32 AP-First, Nag Burst, the ±1.8 Nm torque cap, Signal Map, Abort Guard, Soft Engage, Instant Engage, Minimal Inject. The experimental ones stay off by default.
  • HW4 and HW3 fixes. HW4 AP state from 0x39B byte 0, the HW4 speed-profile bit fix (#59), manual HW selection, HW3 keeps the car's own FSD speed offset (#209), the OTA false-latch fix, the in-car Autopark pause.
  • Boards and flashing. LilyGO T-2CAN (dual CAN) and M5Stack ATOM Matrix, plus a one-click browser flasher.
  • Opt-in features, all off by default. EU Summon unlock, Continue on Green, RHD override, Telemetry Off, adjustable Track Mode, Continuous AP (HW3), Battery Precondition on the ESP32 dashboard, and Acceleration Mode (experimental, not car-validated).
  • ESP32 dashboard. Simplified and Traditional Chinese, Wi-Fi station mode, captive portal on the SoftAP, performance panel, in-page dialogs, web OTA with rollback, and a Memory row.

What has not changed: on 2026.14.x and later the car still blocks FSD activation (#163, #168), while the nag killer, the EU toggles and the capture tools keep working.

Installing

  • ESP32, new board: open the web flasher in Chrome or Edge on a desktop. It now installs the newest stable release by default; when a newer test build is out it is an opt-in link on the same page.
  • ESP32, already running: the OTA Firmware Update card on the dashboard, with tesla-fsd-<your board>.bin from the assets below (the -merged.bin files are for the flasher).
  • Flipper Zero: copy tesla_mod.fap to apps/GPIO on the SD card. The Flipper app is the same as in the recent betas.

Thanks

To everyone who tested, captured and reported through forty betas: @dunckencn, @ssw0209-sys, @jewelrylin, @vrs11, @DrStrangeglovebox, @nobless, @DmitroPanteliuk, @densen2014, @deftdawg, @BenjaminFaal, @anoblekman, @se7en7777777, @maslyankov, @jangshik, @JakNo, @0xAccretion, @weigibbor, @Tesla234987234sdf, @SkyRaax, @olschmalz-cyber, @pirozhkov095-ctrl, @mamixsystem, @kristopf007, @Jclevy-CN, @danpadure, @ViPiMP, @ukinora, @tommybsb-lab, @Tikernel, @siksndavis, @mxkr303, @LonelyCheese09, @jim608, @i520e3e4, @bruvv, @adrianpadure99, @7hf6cfqzkb-png.

Per-beta detail is in changelog.md.