Dome doesn't follow Telescope

[felixBackstube]

Hello,

I have a question regarding slaving a ScopeDome (version USB 2.1) with a Meade RCX400 (used driver LX200 GPS) (using KStars).

While testing the dome with the "Telescope Simulator" everything runs fine. However, when I switch to the real telescope slaving doesn't work as intended.
Slaving is activated and no problems are reported but the dome won't follow the telescope although the change is registered: "Dome is no longer synced to mount azimuth position".
I can force a sync to the telescope's position by changing the value of "Meridian side" but the issue remains: no following.

Is it (rather) a dome or telescope problem?

[knro]

In Dome --> Options, is the "Telescope" snooping set to your LX200 GPS? In Slaving --> Meridian Side, what is set to? You can enable verbose logging for INDI+Dome and attach the logs.

[felixBackstube]

Yes, the telescope is set to LX200 GPS.
Meridian Side is set to Mount. If the setting is changed (value doesn't matter), the dome moves once.
I'll check the logs within the coming week and post an update.

[felixBackstube]

I collected some logs. I hope that there are some useful information.
These line numbers might guide you:
l 20: activated Driver Debug
l 572 to 598: dome moves after changing Meridian Side
l 1127 to 1299: telescope moves but dome stays in position

As you can see I forgot to activate INDI logs. If they are needed, I'll collect some.
I collected logs (starting line 1596) for the dome and a LX200 Autostar. Same behaviour.