Repository navigation
Releases
InspireTel SIP Probe v1.5.0
After Test Path, the probe now names the cause instead of leaving a silent Path Partial chip.
Router diagnosis
- UDP silent while TCP/TLS answers, or Via sent-by rewritten: this is the router (SIP ALG or a UDP SIP filter), not the PBX.
- The banner says so in plain language, with evidence and a What to do list.
- Do now (no router access): put the Yealink on TLS (
account.1.sip_server.1.transport_type = 2, port 5061) and public NTP. SIP ALG almost never inspects TLS. - Optional: disable SIP ALG if someone has the router password.
- Do not enable STUN to “fix” ALG. Keep-alive does not beat ALG either.
- The form switches to the transport that worked so Test SIP Registration uses that path.
macOS
- Download
InspireTel-SIPProbe-macOS-arm64.zipand unzipInspireTel SIP Probe.app. - Unsigned/ad-hoc signed. If Gatekeeper blocks it: right-click → Open, or
xattr -dr com.apple.quarantine "InspireTel SIP Probe.app".
Windows
- Download
InspireTel-SIPProbe-Windows-x64.zipand unzipInspireTel.SIPProbe.exe.
Linux
tar -xzf InspireTel-SIPProbe-Linux-x64.tar.gz
cd InspireTel-SIPProbe
./InspireTel.SIPProbeHeadless: ./InspireTel.SIPProbe --cli --cfg /path/to/phone.cfg
InspireTel SIP Probe v1.4.0
Adds a Linux build. Windows, macOS and Linux now all ship from the same engine.
Linux
tar -xzf InspireTel-SIPProbe-Linux-x64.tar.gz
cd InspireTel-SIPProbe
./InspireTel.SIPProbeSelf-contained, so no .NET install is needed. The graphical mode needs the usual desktop X11 libraries, which are present on any normal desktop install. On a minimal server image:
# Debian / Ubuntu
sudo apt install libx11-6 libice6 libsm6 libfontconfig1
# Fedora / RHEL
sudo dnf install libX11 libICE libSM fontconfigOn a headless box, skip the GUI entirely:
./InspireTel.SIPProbe --cli --cfg /path/to/phone.cfgThe macOS and Linux apps share one Avalonia project, so they have the same interface and the same features, including Listen For Handset and Relay the handset to the PBX. Font stacks now fall back to DejaVu / Liberation / Noto, and the exported log reports the platform it actually ran on instead of always saying macOS.
Set SIPPROBE_LINUX_ARM64=1 when running build-linux.sh to produce an arm64 tarball as well.
macOS
- Download
InspireTel-SIPProbe-macOS-arm64.zipand unzipInspireTel SIP Probe.app. - Unsigned/ad-hoc signed. If Gatekeeper blocks it: right-click → Open, or
xattr -dr com.apple.quarantine "InspireTel SIP Probe.app".
Windows
- Download
InspireTel-SIPProbe-Windows-x64.zipand unzipInspireTel.SIPProbe.exe.
Note: the Linux binary is a valid x86-64 ELF and the shared engine passes all 13 tests, but it has not yet been launched on an actual Linux desktop — please report anything that looks wrong.
InspireTel SIP Probe v1.3.3
Fixes to the handset capture, plus relay mode.
Every request is answered now
The listener only answered REGISTER, OPTIONS and SUBSCRIBE. A Yealink keep-alive sent as INFO went unanswered, so the handset retransmitted it on the standard SIP backoff and the log filled with repeats. Any request gets an answer now.
Retransmissions collapse
The same transaction resent is logged once, then reported as retransmitted (xN) instead of dumping every copy.
Relay mode — "Relay the handset to the PBX"
Tick it before starting the listener. The handset's SIP is forwarded to the real PBX over the transport configured above, so this machine performs the DNS lookup and the TLS handshake on the handset's behalf.
That splits the problem cleanly:
- Registers through the relay but not directly → its credentials and SIP stack are fine, and the fault is in the handset's own path: DNS, TLS trust, or NAT/ALG treatment of its traffic.
- Fails through the relay too → the problem is upstream of the handset's path.
Relay is diagnostic only. The PBX sees this machine as the source, so calls are not expected to work through it.
macOS
- Download
InspireTel-SIPProbe-macOS-arm64.zipand unzipInspireTel SIP Probe.app. - Unsigned/ad-hoc signed. If Gatekeeper blocks it: right-click → Open, or
xattr -dr com.apple.quarantine "InspireTel SIP Probe.app".
Windows
- Download
InspireTel-SIPProbe-Windows-x64.zipand unzipInspireTel.SIPProbe.exe.
Note: relay mode is covered by the shared engine's tests but has not been exercised against a live PBX yet, and the new checkbox has not been clicked on Windows.
InspireTel SIP Probe v1.3.2
Tools for the case where the probe registers fine from a laptop but the handset will not register on any transport.
Handset SIP capture — "Listen For Handset"
Binds UDP and TCP on port 5060. Point the phone's SIP server (or outbound proxy) at the machine running the probe and reboot the handset. The probe logs the phone's REGISTER verbatim, answers 401 so the phone resends with credentials, then 200 OK.
That exposes two things you cannot see from the PBX side:
- the authentication name the handset actually uses — a mismatch against the PBX registration name is a permanent 401
- the handset's User-Agent, i.e. its real firmware version
How to read it:
- Nothing arrives → the phone is not transmitting at all. Look at DNS, gateway, VLAN, or an outbound proxy pointing nowhere.
- REGISTER arrives → the phone's SIP stack and local network are fine, so the fault is specific to the path or credentials between phone and PBX.
The digest response hash is never logged.
Provisioning-file audit
The Yealink parser now also reads account enable, static DNS and static IP, STUN, certificate trust, and the SIP listen port, and grades what it finds.
An outbound proxy that is enabled with an empty address is now an error rather than a warning — it defeats UDP, TCP and TLS alike, which is exactly the shape of "the laptop registers but the phone never does". Anything blocking now raises a red banner instead of scrolling past in the trace.
Also flagged: disabled accounts, missing credentials, transport/port mismatches (TLS on 5060), TLS pointed at a bare IP, static DNS with no DNS servers, STUN enabled with no STUN server, and expiry below the Yeastar minimum.
PBX-side checks
Check PBX Status now also probes for registration log endpoints, and there is a registration watch that polls the extension's online status so you can reboot the handset and see whether its REGISTER reaches the PBX at all.
macOS
- Download
InspireTel-SIPProbe-macOS-arm64.zipand unzipInspireTel SIP Probe.app. - Unsigned/ad-hoc signed. If Gatekeeper blocks it: right-click → Open, or
xattr -dr com.apple.quarantine "InspireTel SIP Probe.app".
Windows
- Download
InspireTel-SIPProbe-Windows-x64.zipand unzipInspireTel.SIPProbe.exe.
Notes: the capture listener needs port 5060 free, so stop any other softphone first, and allow it through the firewall when prompted. The new button is verified on macOS; on Windows it compiles and the shared engine is covered by tests, but the button itself has not been clicked on a Windows machine yet. The PBX log endpoint names are best-effort and fall back to a "check the web UI" message where the PBX does not expose them.
InspireTel SIP Probe v1.3.1
Redesigned interface on both platforms, and the first release whose Windows build actually starts.
Fixed
- The Windows exe closed immediately with no error. The two-panel splitter applied its minimum panel sizes while the control was still at its default 150px width, leaving no valid splitter position, so it threw before the window appeared. Now applied once layout has given the container a real width.
- Startup and unhandled exceptions on Windows now show an error and write
%LOCALAPPDATA%\InspireTel-SIPProbe-crash.log, instead of the process vanishing silently. - macOS: field text was not vertically centred, and the dark trace panel did not follow the card's rounded corners.
Changed
- Signal-path rail across the top of the trace panel — Config → Path → SIP Registration — with a live status beacon beside the title.
- Borderless filled buttons, larger corner radii, wider contrast between window and card surfaces, and uppercase eyebrow labels for section headings.
- Removed the "passwords never logged" note from the header.
macOS
- Download
InspireTel-SIPProbe-macOS-arm64.zipand unzipInspireTel SIP Probe.app. - Self-contained; no .NET install needed.
- Unsigned/ad-hoc signed. If Gatekeeper blocks it: right-click the app → Open, or
xattr -dr com.apple.quarantine "InspireTel SIP Probe.app". - Intel Macs: build with
SIPPROBE_MAC_INTEL=1 ./build-macos.sh.
Windows
- Download
InspireTel-SIPProbe-Windows-x64.zipand unzipInspireTel.SIPProbe.exe. - Self-contained single-file exe; no .NET install needed.
The SIP, transport matrix, ALG, clock/NTP and Yeastar API checks are unchanged.
The Windows build on v1.3.0 is broken — use this release instead.
InspireTel SIP Probe v1.2.0
macOS app for Apple Silicon, using the same SIP diagnostic engine as Windows.
macOS
- Download
InspireTel-SIPProbe-macOS-arm64.zipand unzipInspireTel SIP Probe.app. - Self-contained; no .NET install.
- Same workflow as Windows: load Yealink
.cfg, run the no-auth matrix, then authenticated REGISTER, optional PBX API check. - Unsigned/ad-hoc signed. If Gatekeeper blocks it: right-click the app → Open, or
xattr -dr com.apple.quarantine "InspireTel SIP Probe.app". - Intel Macs: build with
SIPPROBE_MAC_INTEL=1 ./build-macos.sh.
Windows
- Feature-complete v1.1.0 exe remains on the previous release. Rebuild with
./build-windows.ps1if you want a 1.2 version string on Windows.
The SIP, Matrix, ALG, clock/NTP, and Yeastar API checks are unchanged from v1.1.
InspireTel SIP Probe v1.1.0
Configurable matrix ports, SIP ALG detection, clock/NTP warnings, and Yeastar OpenAPI status.
Changes
- Matrix UDP/TCP/TLS ports are no longer hardcoded to 5060/5061. A custom destination port is added as an extra probe when it is not already in that set.
- REGISTER responses are compared with the sent Via/Contact. Rewritten sent-by or branch is reported as SIP ALG;
received/rportalone is treated as normal NAT. - TLS certificate validity is compared with the local clock. Yealink configs with a private NTP server (for example
172.19.x.x) produce an explicit warning. - Check PBX status uses Yeastar OpenAPI to report extension online status, assigned phone IP/firmware, transport, registration-name mismatch, and blocked IPs when the API exposes that list.
Use on the affected laptop
- Replace the previous exe with this build.
- Load the Yealink
.cfg. - Confirm Matrix tab ports, then run the no-auth matrix.
- Run authenticated REGISTER.
- Optional: fill OpenAPI Client ID/Secret and Check PBX status.
SHA-256 of InspireTel.SIPProbe.exe is in SHA256.txt.
InspireTel SIP Probe v1.0.0
First packaged Windows build of InspireTel SIP Probe.
What it tests
- DNS resolution of the PBX hostname
- UDP, TCP, and TLS reachability
- TLS 1.2 handshake and certificate hostname/trust
- SIP Digest challenge (401/407)
- Authenticated REGISTER, then automatic unregister (
Expires: 0)
On the affected Windows laptop
- Download
InspireTel-SIPProbe-Windows-x64.zipfrom this release. - Run
InspireTel.SIPProbe.exe(self-contained, no .NET install needed). - Load the Yealink
.cfgif you have it, or enter the SIP values by hand. - Run transport matrix (no auth) first, then authenticated REGISTER.
- Export the redacted log.
The executable is unsigned. Follow the client's application-control policy.
SHA-256 of InspireTel.SIPProbe.exe is in SHA256.txt.