Skip to content

InspireTel SIP Probe v1.3.2

Choose a tag to compare

@inspiretelapps inspiretelapps released this 26 Aug 13:06
· 3 commits to main since this release

Tools for the case where the probe registers fine from a laptop but the handset will not register on any transport.

Handset SIP capture — "Listen For Handset"

Binds UDP and TCP on port 5060. Point the phone's SIP server (or outbound proxy) at the machine running the probe and reboot the handset. The probe logs the phone's REGISTER verbatim, answers 401 so the phone resends with credentials, then 200 OK.

That exposes two things you cannot see from the PBX side:

  • the authentication name the handset actually uses — a mismatch against the PBX registration name is a permanent 401
  • the handset's User-Agent, i.e. its real firmware version

How to read it:

  • Nothing arrives → the phone is not transmitting at all. Look at DNS, gateway, VLAN, or an outbound proxy pointing nowhere.
  • REGISTER arrives → the phone's SIP stack and local network are fine, so the fault is specific to the path or credentials between phone and PBX.

The digest response hash is never logged.

Provisioning-file audit

The Yealink parser now also reads account enable, static DNS and static IP, STUN, certificate trust, and the SIP listen port, and grades what it finds.

An outbound proxy that is enabled with an empty address is now an error rather than a warning — it defeats UDP, TCP and TLS alike, which is exactly the shape of "the laptop registers but the phone never does". Anything blocking now raises a red banner instead of scrolling past in the trace.

Also flagged: disabled accounts, missing credentials, transport/port mismatches (TLS on 5060), TLS pointed at a bare IP, static DNS with no DNS servers, STUN enabled with no STUN server, and expiry below the Yeastar minimum.

PBX-side checks

Check PBX Status now also probes for registration log endpoints, and there is a registration watch that polls the extension's online status so you can reboot the handset and see whether its REGISTER reaches the PBX at all.

macOS

  • Download InspireTel-SIPProbe-macOS-arm64.zip and unzip InspireTel SIP Probe.app.
  • Unsigned/ad-hoc signed. If Gatekeeper blocks it: right-click → Open, or xattr -dr com.apple.quarantine "InspireTel SIP Probe.app".

Windows

  • Download InspireTel-SIPProbe-Windows-x64.zip and unzip InspireTel.SIPProbe.exe.

Notes: the capture listener needs port 5060 free, so stop any other softphone first, and allow it through the firewall when prompted. The new button is verified on macOS; on Windows it compiles and the shared engine is covered by tests, but the button itself has not been clicked on a Windows machine yet. The PBX log endpoint names are best-effort and fall back to a "check the web UI" message where the PBX does not expose them.