Command line introduction and shell scripting

Overview

This provides an basic introduction to shell programming. If you use Linux much at all, you'll at least occasionally find yourself needing to use the shell/command line (i.e., what you get when you open the terminal program). Having experience with the shell is extremely useful, as you often end up needing to, e.g., ssh into a remote or cloud system where you won't have access to the nice GUI tools. This lab provides an introduction to a variety of important shell tools and how programming/scripting is done using shell commands.

⚠️ Remember to complete the Command line introduction pre-lab reading and preparation before this lab begins.

• Introduction
• Setting up
• Exercises
  • First script: Compiling a C program
  • Second script: Clean up a big directory
• Final Thoughts
• What to turn in

Introduction

You will need to write several different scripts for this lab:

• A script to extract the contents of a tar archive, and then compile and run the C program it contains
• A script to delete a large number of unwanted files, leaving the other files in that directory alone
• A script that separates executable files from non-executable ones, processing the two groups differently

None of these will be very long, but most or all of them will require you to learn new shell commands or tools. We’ll give you hints and pointers as to what commands/tools to be using, but you’ll need to do some digging in the man pages and/or searching on-line to find the details. Don’t bang your head against any piece of this for too long. If you’ve spent more than 10 minutes on a single part or command, you probably need to take a break and ask someone (like your instructor) for some help. On the other side of the coin, however, don’t immediately give up and ask at every step. Learning how to find and use this sort of information is an enormously valuable skill, and will be useful far longer and more often than the details that you’re actually looking up. So make a bit of an effort, but know when to stop.

Setting up

Before you start writing scripts, you’ll need get a copy of this repository to work on. This is a two step process:

• First follow the canvas link (which you've alredy done) to create your copy of the repository on github classrom.
• Then clone your fork to the machine you're working on

If you're working in pairs or larger groups only one of you needs to fork the repository, but that person then needs to add everyone else as collaborators on the project, and then everyone will need to clone the project to their machine to work on it.

You’ll “turn in” your work simply by having it committed to the repository. We’ll check it out from there to run and grade it. We'll obviously need to be able to find your repository to grade it, so make sure to submit the URL of your forked repository using whatever technique is indicated by your instructor.

Be certain to commit often, and trade places at the keyboard often. At a minimum you should probably trade every time you solve a specific problem that comes out of the test script. You should probably consider committing that often as well.

---

Exercises

You should complete the following exercises for this lab:

• First script: Compiling a C program
• Second script: Clean up a big directory

The tests and any relevant files for each part are in the appropriate sub-directory in this repository:

• compiling
• cleaning

In each case there are tests written using the bats testing tool for bash scripts in a file called tests.bats. You should be able to run the tests with bats tests.bats, and use the testing results as a guide to the development of your scripts. If you ever find that you don't understand what the tests are "telling you", definitely ask; they are there to help you, and if they aren't communicating effectively then they're not doing their job.

You should get all the tests to pass before you "turn in" your work. Having the tests pass doesn't guarantee that your scripts are 100% correct, but it's a strong initial indicator.

First script: Compiling a C program

The tests and data for this problem are in the compiling directory of this project, and the discussion of this problem will all assume that you've cded into that directory. Your goal is to get the tests in tests.bats (in the compiling directory) to pass.

For this you should write a bash script called extract_and_compile.sh that:

• Takes two arguments.
  • The first is a number that will be used as an argument when you call the C program that you'll be compiling in a bit.
  • The second is the name of a directory that you should do extract the files into and compile the program.
• Extracts the contents of the tar archive NthPrime.tgz into the specified directory. This is a compressed tar file (indicated by the gz, for gzip, in the file extension), so you’ll need to uncompress and then extract; the tar command can do both things in one step. You might find the man pages for tar. This should create a directory NthPrime in your scratch directory; that NthPrime directory should contain several *.c and *.h files that can be compiled to create an executable.
• Goes into the NthPrime directory that the tar extraction created.
• Compiles the C program that gets extracted, generating an executable called NthPrime (still in the NthPrime directory in your specified temporary directory).
• Call the resulting executable (NthPrime). NthPrime requires a single number as a command line argument; you should pass it the first of the two command line arguments your script received.

As an example, imagine your script is called using:

./extract_and_compile.sh 17 /tmp/tmp.7dMpfowoGF

Then it should

• Extract the contents of NthPrime.tgz into /tmp/tmp.7dMpfowoGF creating a directory /tmp/tmp.7dMpfowoGF/NthPrime
• Compile the files in /tmp/tmp.7dMpfowoGF/NthPrime to generate the binary /tmp/tmp.7dMpfowoGF/NthPrime/NthPrime.
• Run that binary with the argument 17 (the first argument in this example); this should generate the output Prime 17 = 59.

The final file structure in the example above (as displayed by the tree program) should be:

$ tree /tmp/tmp.7dMpfowoGF/
/tmp/tmp.7dMpfowoGF/
└── NthPrime
    ├── NthPrime
    ├── main.c
    ├── nth_prime.c
    └── nth_prime.h

1 directory, 4 files

Remember that you can call your script "by hand" as a debugging aid so you can see exactly what it's doing and where. So you could do something like

mkdir /tmp/frogs
./extract_and_compile.sh 8 /tmp/frogs

and then go look in /tmp/frogs and see what your script did there. It's important that the scratch directory exist before you call your script (hence the mkdir call first). You would want to empty the contents of the scratch directory before calling your script a second time, or you won't be able to tell what was left over from the first call. You probably want to delete /tmp/frogs (or whatever you called it) when you're done just as a politness so you don't clutter up /tmp/ unnecessarily.

Some notes on compiling a C program

The C compiler in the lab is gcc.

There are two .c files in this program, both of which will need to be compiled and linked. You can do this in a single line (handing gcc both .c files) or you can compile them separately and then link them.

You can tell gcc what you want the executable called, or you can take the default output and rename it.

Most of you have never compiled a C program before, so this might be a good time to ask me to say a little about how that works. Alternately, you might see what you can figure out with man gcc.

❗ When you run the program you compiled (NthPrime) you need give NthPrime a single command line argument. The value you should pass it is the number your script received as its second command line argument.

⚠️ Some non-obvious assumptions that the test script makes:

The .tgz version of the tar archive will be in the specified directory when you’re done. This means that if you first gunzip and then, in a separate step, untar, the test is likely to fail since you’ll end up with a .tar file instead of a .tgz file. So you should use the appropriate tar flags that uncompress and untar in a single step.

The tests also assume that your script generates no "extraneous" output. If, for example, you use the -v flag with tar, you'll generate a bunch of output that will cause some of the tests to fail. You may want to have "extra" output as a debugging tool while you're working on the script, but you'll need to remove all that to get the tests to pass. This is consistent with standard practice in Unix shell programming, where most commands provide little to no output if things went fine, making it much easier for you to chain them together into more complex behaviors.

Second script: Clean up a big directory

Your goal here is to get the tests in tests.bats to pass. For this you should write a bash script named big_clean.sh that:

• Takes two arguments:
  • The first will be the name of a compressed tar archive (.tgz file) that contains the files you'll process.
  • The second will be the name of a scratch directory you can do your work in.
• Extracts the contents of the tar archive into the specified scratch directory. This will take a few seconds for big_dir.tgz since that has over 1000 files in it.
• Removes all the files from the scratch directory (i.e., the files that came from your tar archive) containing the line “DELETE ME!”, while leaving all the others alone. (There are quite a few ways to do this. The grep family of tools is probably the easiest way to see if a file has the “DELETE ME!” line. You could then use a shell loop to loop through all the files and remove the ones that have the line, or you can use rm with either the $(…) syntax or backticks.)
• Create a new compressed tar archive that contains the files in the scratch directory after you've removed the "DELETE ME!" files. The files in the archive should not have the path to the scratch directory in their filenames. The new tar file should have the name cleaned_... where the ellipsis is replaced by the name of the original file, e.g., if your original file is little_dir.tgz then the newly created file should be called cleaned_little_dir.tgz.
  • This is probably the trickiest part of the lab because you have to be in the scratch directory when you create the tar archive or you'll end up with the path to the scratch directory in all the file names.
  • It's easy enough to cd $SCRATCH or pushd $SCRATCH to get to the scratch directory to run the tar -zcf... command, but then how do you know where you came from, so you can put the new tar file in the right place? The pwd command returns your current working directory, so something like here=$(pwd) will capture your current directory in a shell variable called here so you can use $here later to refer to where you had been.

If we assume that your scratch directory is, for example, /tmp/tmp.eMvVweqb, then after the first step (uncompressing) the sample tar file little_dir.tgz you should end up with:

$ tree /tmp/tmp.eMvVweqb/
/tmp/tmp.eMvVweqb/
└── little_dir
    ├── file_0
    ├── file_1
    ├── file_10
    ├── file_11
    ├── file_12
    ├── file_13
    ├── file_14
    ├── file_15
    ├── file_16
    ├── file_17
    ├── file_18
    ├── file_19
    ├── file_2
    ├── file_3
    ├── file_4
    ├── file_5
    ├── file_6
    ├── file_7
    ├── file_8
    └── file_9

1 directory, 20 files

Then after deleting the appropriate files, you should have:

$ tree /tmp/tmp.eMvVweqb/
/tmp/tmp.eMvVweqb/
└── little_dir
    ├── file_1
    ├── file_10
    ├── file_11
    ├── file_12
    ├── file_15
    ├── file_16
    ├── file_17
    ├── file_18
    ├── file_19
    ├── file_2
    ├── file_3
    ├── file_4
    ├── file_5
    ├── file_6
    ├── file_8
    └── file_9

1 directory, 16 files

Finally, after creating the new cleaned tar file (cleaned_little_dir.tgz in this case) your project directory should look like:

$ tree cleaning/
cleaning/
├── big_dir.tgz
├── cleaned_little_dir.tgz
├── little_dir.tgz
└── tests.bats

0 directories, 4 files

Final Thoughts

Make sure that all your code passes the appropriate tests. Passing the test will make up the majority of your grade. There will also be a portion of your grade that will take into account how clean your code is. Also when we said that you should commit often –- we meant it. Also be professional and informative about your commit messages; we'll be looking at them in the grading. Finally, it is easy to overlook important details. If the test isn’t being passed go back and re-read the directions carefully.

What to turn in

You'll "turn this in" by committing your work to your fork of this starter project. You should also submit the URL of your repository in whatever way indicated by your instructor. Remember to make sure you've completed each of the assigned tasks:

• First script: Compiling a C program
• Second script: Clean up a big directory