Skip to content

Releases

SLOOP 3.4.0 (public beta)

Pre-release

Choose a tag to compare

@isod89 isod89 released this 17 Nov 22:24

SLOOP 3.4.0: SLOOP 2.8.5's pages, gestures and way of saving

  • The pages, layers and gestures of SLOOP 2.8.5 (EDIT, FX, LFO, ENV, SEQ,
    SEL, ARP, GLO, SAVE), with SLOOP 3's 5 tracks, 8 patterns a track,
    128 steps, SOUNDS and FAVS, NOTES, the DRUMS grid and the MIX page
    (GLO held). SELECT turns the pages and stops at the ends.
  • Saving as in SLOOP 2.8: what plays changes freely (the autosave keeps
    it); the 8 patterns change only when saved. SAVE held + a key tapped
    plays that pattern as saved, several make a chain, held 1.5 s saves
    into it. SAVE on the main screen: SONG 1/3, SONG 2/3, PROJECT 3/3
    (SAVE, NEW, LOAD). Project format 16 (3.3.x can't read it).
  • The SLICER's 16 steps drawn again; KNOB 4 of the main screen is the
    PAN again; the playing pattern in a square top right, the battery as an
    icon; the menu as in 2.8.5, the version in SYSTEM (KNOB 4).
  • Issues #7, #11: the DAC 6 dB lower, as SLOOP 2.8.5 (USB keeps the full
    level); SPEAKER LOWCUT no longer cuts USB, and says so at power-on.
  • The leads POLY, the basses MONO; a new project's synths at one level.
  • The web editor: a drum kit from your own samples (as SLOOP 2.8.5),
    USR3+4; the theme's 5 track colours and previews.
  • MIDI with 5 tracks checked note by note; the bar counter loops (#1, #5);
    macOS build fixes (#10).

SLOOP 3.3.7 (public beta)

Pre-release

Choose a tag to compare

@isod89 isod89 released this 16 Nov 03:21

SLOOP 3.3.7 · public beta

⚠ SLOOP 3 is a public beta. It was rewritten from scratch and is being tested on real FM-1s right now. Expect bugs, keep backups, and don't rely on it on stage yet. Please report what you find.

Prefer the tried and tested version? SLOOP 2.8 stays in its own repository, github.com/isod89/sloop-fm1, with its own installer.

Install or update

Open isod89.github.io/sloop3-fm1 in Chrome or Edge (or download installer-sloop3-3.3.7.html below). Already on SLOOP 3: steps 3 to 5, about a minute; your project and sounds stay.

Fixed in 3.3.7: the first testers' serious reports

Thank you for the reports. This update fixes what made the sequencer unreliable; more fixes are on the way.

  • Tracks drifting apart. Two tracks of the same length could end up offset (by a whole bar with 2-bar patterns), and pattern changes could feel like the tempo jumped. Now, when you change every track's pattern, all tracks start it together, on the same beat, even the ones already on that pattern. The same goes for the song and for chains: a chain now changes at the end of the pattern of the track you're on, at the same moment for every track.
  • Chords stacking up when recording a loop. Recording over a loop added the notes again on every pass, so a chord played on each loop thickened and blurred. Now a note played again where it already is takes its place; new notes are still added.
  • Takes on the steps by default. A new project records on the steps (QUANT ON), as SLOOP 2.8 did. To keep your notes exactly as played: REC armed while stopped (REC READY), KNOB 4 QUANT OFF. A project you already have keeps its setting: set QUANT to ON there if your takes sound loose.

Newer FM-1s and m-bootloader 2.3

  • FM-1s sold since fall 2026 have another flash chip, the UCUN UC25HQ80 (0xB36014). Several FM-1 firmwares could not save on it because they only accepted the older chip's ID. SLOOP 3 accepts any 1 MB chip, waits on the chip itself rather than on fixed delays, and checks every save by reading it back. 3.3.7 also adds a fallback for clearing the chip's write protection. Not yet tried on a unit with that chip, by us or by m-bootloader: if you have one, make an M-Flasher backup first (M-Flasher 0.9.1 or newer warns you) and please tell us how it goes.
  • m-bootloader 2.3 can answer in MIDI MODE as ota-FM-1_900, like M-VAVE's update loaders. The installer now finds it under that name too.

Also new since 3.3.6

  • The battery as a thin line along the bottom of the screen (green, yellow under 30 %, red under 15 %, blinking under 8 %; blue with a light running along it on a computer's USB).
  • The installer: a guided page in English and French that finds the FM-1 by itself, backs it up first and shows each phase of the install.

Known, coming next

The bar counter at the top that keeps counting up, the "HOLD REC" hint squeezed in the corner, a step lighting only when the key is released while recording, the chords chosen in SEL mode not lit on the keys, the reverb SIZE range, note lengths shown with decimals, and the settings menu being hard to find (it's there: hold HOME, then turn SELECT: SCREEN, LIGHTS, AUDIO, SEQ · SYSTEM).

Files

File What
installer-sloop3-3.3.7.html the installer page, the firmware inside (open it in Chrome or Edge)
editor-sloop3.html the web editor (Chrome or Edge, with SLOOP 3 running on the FM-1)
sloop3-3.3.7.area the plain application area, for developers

The guide: docs/GUIDE.md. SLOOP 3 is free software (GPL-3.0), unofficial (not made, endorsed or supported by M-VAVE), and installed at your own risk.

SLOOP 3.3.6 (public beta)

Pre-release

Choose a tag to compare

@isod89 isod89 released this 16 Nov 00:11

SLOOP 3.3.6 · public beta

⚠ SLOOP 3 is a public beta. It was rewritten from scratch: a new sound engine, a new sequencer and a new interface. It plays like SLOOP 2.8, but almost every line is new and it is being tested on real FM-1s right now. Expect bugs, keep backups, and don't rely on it on stage yet. Please report what you find.

Prefer the tried and tested version? SLOOP 2.8 stays in its own repository, github.com/isod89/sloop-fm1, with its own installer. SLOOP 3 never writes SLOOP 2.8's data: you can go back at any time by restoring your backup.

Install

Open isod89.github.io/sloop3-fm1 in Chrome or Edge (or download installer-sloop3-3.3.6.html below and open it from your disk). A guided page, in English or French, takes you through it one step at a time:

  1. Before you start: what a beta means, what you need (the FM-1, a USB data cable, Chrome or Edge).
  2. The safety net: m-bootloader, once. The page shows how to check whether it is there, and how to set it up with M-Flasher if not.
  3. Connect: hold PLAY at power-on, MIDI MODE, plug it in. The page finds the FM-1 by itself.
  4. Back up: the whole FM-1 (1 MB) as a file. Nothing is written.
  5. Install: about a minute. Nothing is erased before the whole package has been checked.

Updating an earlier SLOOP 3: steps 3 to 5, about a minute. From 3.0–3.3.4, back up your projects first with the web editor (Projects, BACK UP EVERYTHING): since 3.3.5 the FM-1 keeps one project (the newest of your 8).

New in 3.3.6

  • Your own breakbeats. In the web editor, Samples, a BREAK (slices): drop a break, SLOOP finds every hit (or cut it on a grid, or by hand), hear each slice, and send it to the FM-1:
    • on a synth track (SLICE): the slices on the keys, the break as its pattern, at its tempo;
    • or on the drum track: the break becomes your own drum kit, saved under its name in YOUR KITS (PRESETS), so changing kits never loses it.
    • Samples also get a quality setting for long sounds (up to about 14 s a slot), REVERSE, WAV export and recording from your computer's input.
  • The keys light up to guide you. Hold HOME: OPEN, NEW and SAVE light up on the first white keys, a key apart. Hold SAVE: your 8 patterns light up, 1–4 and 5–8 each from dim to bright.
  • REC held clears the track, and only that: it no longer turns recording on. A new GLO page, REC 6/6: changing track while recording stops REC (the default) or keeps it.
  • GLO: SELECT turns its pages (KNOB 1 sets the tempo).
  • Six visualisers: OSCILLOSCOPE, SLOOP, WIRES, VU METERS, SPECTRUM and LCD (room for the rest).
  • Sampled drums and GRAIN at their right pitch (they played almost a fifth too high).
  • A new installer: a guided wizard, in English and French, that finds the FM-1 by itself, backs it up and shows each phase of the install.

Also in the 3.3 updates

  • One project, always room for it (3.3.5). Notes are stored compactly, and the FM-1 keeps one project with room for the fullest one possible (5 tracks × 8 patterns × 128 steps, each with its own sound). Every save is read back and checked before it counts, so a power cut never damages it. HOME held shows how full it is (MEMORY).
  • The right instruments: the factory sample bank plays the right sets (VIBES, HORN STAB, STRING STB, LOFI FLUTE, SCRATCH, GM KIT, the acoustic kits).
  • Steadier and sturdier: the lights scanned by a timer, the screen and buttons always answer, a long overload cuts voices and says so, and a watchdog restarts an FM-1 that stops answering (the first message then says where: FROZE IN … / RESTART IN … — please put it in your report).

What's in SLOOP 3

  • The engine: 32-bit float sound, 1.45 ms blocks, both cores (32 voices + 8), 13 engines, all 153 factory sounds rebuilt value for value, SLICE, 46 drum kits plus yours.
  • The sequencer: 5 tracks (four synths and the drums), up to 128 steps, 8 patterns per track, live recording at 1/96 of a step, 8 undos, conditions and chance, parameter locks, NOTES (a piano roll), a song.
  • Sound and screen: INSERT and SLICER per track, delay, reverb, chorus, 27 punch-in effects, TEXTURE, SOUNDS by category, 16 favourites, 32 sounds of your own, colour themes, six visualisers.
  • Connections: USB audio (44.1 or 48 kHz), USB MIDI, MIDI in on the TRS jack, a web editor in the browser.
  • SLOOP 2.8 comes along: projects, user presets, favourites, samples, SYN kits, FM6 bank and settings are opened at the first start, read only.

Files

File What
installer-sloop3-3.3.6.html the installer page, the firmware inside (open it in Chrome or Edge)
editor-sloop3.html the web editor (Chrome or Edge, with SLOOP 3 running on the FM-1)
sloop3-3.3.6.area the plain application area, for developers

The guide: docs/GUIDE.md. SLOOP 3 is free software (GPL-3.0), unofficial (not made, endorsed or supported by M-VAVE), and installed at your own risk.