Repository navigation
SLOOP 3.3.6 (public beta)
Pre-releaseSLOOP 3.3.6 · public beta
⚠ SLOOP 3 is a public beta. It was rewritten from scratch: a new sound engine, a new sequencer and a new interface. It plays like SLOOP 2.8, but almost every line is new and it is being tested on real FM-1s right now. Expect bugs, keep backups, and don't rely on it on stage yet. Please report what you find.
Prefer the tried and tested version? SLOOP 2.8 stays in its own repository, github.com/isod89/sloop-fm1, with its own installer. SLOOP 3 never writes SLOOP 2.8's data: you can go back at any time by restoring your backup.
Install
Open isod89.github.io/sloop3-fm1 in Chrome or Edge (or download installer-sloop3-3.3.6.html below and open it from your disk). A guided page, in English or French, takes you through it one step at a time:
- Before you start: what a beta means, what you need (the FM-1, a USB data cable, Chrome or Edge).
- The safety net: m-bootloader, once. The page shows how to check whether it is there, and how to set it up with M-Flasher if not.
- Connect: hold PLAY at power-on, MIDI MODE, plug it in. The page finds the FM-1 by itself.
- Back up: the whole FM-1 (1 MB) as a file. Nothing is written.
- Install: about a minute. Nothing is erased before the whole package has been checked.
Updating an earlier SLOOP 3: steps 3 to 5, about a minute. From 3.0–3.3.4, back up your projects first with the web editor (Projects, BACK UP EVERYTHING): since 3.3.5 the FM-1 keeps one project (the newest of your 8).
New in 3.3.6
- Your own breakbeats. In the web editor, Samples, a BREAK (slices): drop a break, SLOOP finds every hit (or cut it on a grid, or by hand), hear each slice, and send it to the FM-1:
- on a synth track (SLICE): the slices on the keys, the break as its pattern, at its tempo;
- or on the drum track: the break becomes your own drum kit, saved under its name in YOUR KITS (PRESETS), so changing kits never loses it.
- Samples also get a quality setting for long sounds (up to about 14 s a slot), REVERSE, WAV export and recording from your computer's input.
- The keys light up to guide you. Hold HOME: OPEN, NEW and SAVE light up on the first white keys, a key apart. Hold SAVE: your 8 patterns light up, 1–4 and 5–8 each from dim to bright.
- REC held clears the track, and only that: it no longer turns recording on. A new GLO page, REC 6/6: changing track while recording stops REC (the default) or keeps it.
- GLO: SELECT turns its pages (KNOB 1 sets the tempo).
- Six visualisers: OSCILLOSCOPE, SLOOP, WIRES, VU METERS, SPECTRUM and LCD (room for the rest).
- Sampled drums and GRAIN at their right pitch (they played almost a fifth too high).
- A new installer: a guided wizard, in English and French, that finds the FM-1 by itself, backs it up and shows each phase of the install.
Also in the 3.3 updates
- One project, always room for it (3.3.5). Notes are stored compactly, and the FM-1 keeps one project with room for the fullest one possible (5 tracks × 8 patterns × 128 steps, each with its own sound). Every save is read back and checked before it counts, so a power cut never damages it. HOME held shows how full it is (MEMORY).
- The right instruments: the factory sample bank plays the right sets (VIBES, HORN STAB, STRING STB, LOFI FLUTE, SCRATCH, GM KIT, the acoustic kits).
- Steadier and sturdier: the lights scanned by a timer, the screen and buttons always answer, a long overload cuts voices and says so, and a watchdog restarts an FM-1 that stops answering (the first message then says where: FROZE IN … / RESTART IN … — please put it in your report).
What's in SLOOP 3
- The engine: 32-bit float sound, 1.45 ms blocks, both cores (32 voices + 8), 13 engines, all 153 factory sounds rebuilt value for value, SLICE, 46 drum kits plus yours.
- The sequencer: 5 tracks (four synths and the drums), up to 128 steps, 8 patterns per track, live recording at 1/96 of a step, 8 undos, conditions and chance, parameter locks, NOTES (a piano roll), a song.
- Sound and screen: INSERT and SLICER per track, delay, reverb, chorus, 27 punch-in effects, TEXTURE, SOUNDS by category, 16 favourites, 32 sounds of your own, colour themes, six visualisers.
- Connections: USB audio (44.1 or 48 kHz), USB MIDI, MIDI in on the TRS jack, a web editor in the browser.
- SLOOP 2.8 comes along: projects, user presets, favourites, samples, SYN kits, FM6 bank and settings are opened at the first start, read only.
Files
| File | What |
|---|---|
installer-sloop3-3.3.6.html |
the installer page, the firmware inside (open it in Chrome or Edge) |
editor-sloop3.html |
the web editor (Chrome or Edge, with SLOOP 3 running on the FM-1) |
sloop3-3.3.6.area |
the plain application area, for developers |
The guide: docs/GUIDE.md. SLOOP 3 is free software (GPL-3.0), unofficial (not made, endorsed or supported by M-VAVE), and installed at your own risk.