Repository navigation
Handtop v0.3.9: HDMI fixes and device notifications
HDMI fixes, notifications when things are plugged in or connect, and a fix for Bluetooth missing on the first boot.
⚠️ Known issue (fix included, not yet confirmed): Bluetooth was sometimes missing on the first boot after flashing. This release should fix it (below). If it still happens, restart once (Power → Restart) and please attach the newestlogs/bt-NNNN.txtfrom the boot partition to an issue.
Which image do I need?
- Most RG35XX H units:
handtop-20261106-v0.3.9.img.xz - If that image does nothing at power-on (no LED at all), your unit has DDR3 RAM:
handtop-20261106-v0.3.9-DDR3.img.xz
Flash with balenaEtcher or Rufus, boot from the TF1 (left) slot. Login rg / rg35xxh; SSH is off until Apps → Enable SSH.
| File | SHA-256 |
|---|---|
| handtop-20261106-v0.3.9.img.xz | a9fa74b0b0fce74b599344c8eae8261d24e94eaf6bbb52a43ed28cb48e01cbde |
| handtop-20261106-v0.3.9-DDR3.img.xz | fa0ed796aefd1eb7684468bcc6af22b2792cef8876a6cbcddb112485ee89a5e9 |
What's new in v0.3.9
Notifications
- USB devices: plugging in or pulling out a keyboard, mouse, controller, hub, Wi-Fi, Bluetooth or network adapter, audio device or webcam shows what it is and its name. If no driver takes it, the notification says so. USB drives and SD cards keep their own notifications.
- Bluetooth devices: a paired controller, mouse or headset now shows when it connects or disconnects. Before, this only happened while Bluetooth Manager was open.
- Charger and battery: "Charging" or "Charger unplugged" with the battery level, and "Fully charged" once when the battery is full.
- Monitor: unplugging it tells you the picture is back on the handheld screen.
HDMI
- No taskbar and a slow pointer on some monitors, fixed. On a 1920×1200 monitor, Monitor only left the screen without a taskbar and with the pointer at handheld speed, and unplugging didn't bring the taskbar back. The monitor's own best mode was more than the handheld's HDMI can drive. Now the Display app only picks modes from the monitor's list, checks after every change that the monitor really came on, and otherwise keeps the handheld screen on and tells you. The taskbar restarts by itself if it ever stops, and the pointer keeps its monitor speed.
- A notification stuck on the monitor, fixed. After keeping a new resolution, its notification could stay frozen at the top left of the monitor, and later notifications didn't show until a reboot.
- Every display change is logged to
~/.local/state/session/display.log. If a monitor misbehaves, please attach it to an issue.
Bluetooth
- Missing on the first boot after flashing, should be fixed. On those boots the Bluetooth chip stayed silent until its driver started it again. A boot check now notices that within a few seconds and restarts the driver once, so Bluetooth is up before the desktop appears. Every boot also leaves a short record in
logs/bt-NNNN.txton the boot partition. It hasn't been seen on a real failing boot yet, so the known-issue note stays for now.
Disclaimer
Handtop is an unofficial hobby project, not affiliated with Anbernic, ROCKNIX, LibreELEC, Microsoft or Nintendo. Use at your own risk; see the Disclaimer section in the README.
Full history in CHANGELOG.md.