Repository navigation
Releases
FieldCraft v0.8.1
What's new since 0.7.5
Meshing
- Meshes follow the exact CAD geometry: tet vertices on the true curves and surfaces, hex curves divided by chordal deviation, octree boundaries on exact faces. Curved parts no longer pick up tessellation facets.
- Face seeds (
mesh.seed.face) set the element count on every edge of a face, and edge seeds now keep their exact count. Milestones M1–M3 are done: geometry check, seeding, and the deck exports including LS-DYNA beams. mesh.verifyreports quality and certified validity for any set of elements.- Hex meshing is more robust: O-grids for disks and holes, revolved tubes, extrusions that follow the size field.
Fluid (lattice Boltzmann)
- Curved walls are interpolated (Bouzidi bounce-back) on both CPU and GPU, checked against Hagen–Poiseuille pipe flow and annular Couette flow.
- Thin walls between fluid passages.
results.fluid.measuregives fluid measurements over saved frames as a table or CSV: area means, wall power and wall stress. Each run also reports its numerical validity.- Mass is now conserved on the GPU.
Heat transfer
- Radiation to the surroundings from solid faces, including conducting solids in a flow.
- Probes report the heat flux of each transient frame.
Decks and checks
- LS-DYNA beam sections are written as resultant beams.
- The model check names any output a step will not write, and refuses a static step that applies no load or boundary condition.
Automation and agents
- Every command field now has a full schema, so MCP agents, scripts and forms all see exact types.
view.image.savesaves the viewport as a PNG.- The control channel keeps answering while the screen is locked.
Platform
- Designs from SolidCraft 0.41 and 0.42 open.
- Nightly pre-releases of develop are built when the nightly tests pass; stable installs are never offered them.
- A Nix flake is included.
- The interface uses SolidCraft's UI kit throughout: a new start page, a Preferences window, and a History bar you can dock.
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Which file?
- macOS 11+ (Apple silicon): open
fieldcraft-0.8.1-macos-aarch64.dmgand
dragFieldCraft.apponto Applications. The command-line tool is included at
/Applications/FieldCraft.app/Contents/MacOS/fieldcraft-cliand also available separately in
fieldcraft-cli-0.8.1-macos-aarch64.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.8.1-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.8.1-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.8.1-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. SHA256SUMS.txt is signed with the FieldCraft release key (SHA256SUMS.txt.minisig), so FieldCraft's Help › Check for Updates can verify and install this release.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- docs: clean-room rules for the solver match the governance guide by @jyviko in #944
- docs: openly published benchmark values may be cited as references by @jyviko in #945
- release: nightly pre-releases of develop by @jyviko in #948
- ui: the browser shows the setup as it is reached by @jyviko in #951
- ui: no JSON and no command ids in front of a person by @jyviko in #952
- deps: bump the cargo-compatible group with 5 updates by @dependabot[bot] in #949
- lbm-gpu: close TRT mass after f32 relaxation by @valo in #932
- ui: the kit-message test resolves only the target's packages by @jyviko in #955
- ui: a start page from the kit in the workspace's place by @jyviko in #947
- ui: right-side kit cards, History docks, centred navigation by @jyviko in #953
- ui: New and Open start the interface afresh by @jyviko in #956
- ui: with History at the top, the browser's column runs below it by @jyviko in #957
- docs: Ko-fi funding link and Sponsor button by @jyviko in #968
- ui: Settings is the kit's Preferences window by @jyviko in #959
- geometry: SolidCraft v0.42.0; designs from SolidCraft 0.41 and 0.42 open by @jyviko in #960
- ui: Donate and Discord pills in the title bar by @jyviko in #961
- release: 0.8.1 by @jyviko in #970
New Contributors
Full Changelog: v0.8.0...v0.8.1
FieldCraft v0.8.1-nightly.20261120.49.1 (nightly)
Nightly build of develop at a6d29ed54, which passed CI's nightly run (the full gate, the heavy tests and the oracle). Nightlies are for trying what is coming; the newest 7 are kept. FieldCraft installed from a nightly is offered newer nightlies and newer releases; one installed from a release is never offered a nightly.
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Which file?
- macOS 11+ (Apple silicon): open
fieldcraft-0.8.1-nightly.20261120.49.1-macos-aarch64.dmgand
dragFieldCraft.apponto Applications. The command-line tool is included at
/Applications/FieldCraft.app/Contents/MacOS/fieldcraft-cliand also available separately in
fieldcraft-cli-0.8.1-nightly.20261120.49.1-macos-aarch64.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.8.1-nightly.20261120.49.1-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.8.1-nightly.20261120.49.1-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.8.1-nightly.20261120.49.1-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. SHA256SUMS.txt is signed with the FieldCraft release key (SHA256SUMS.txt.minisig), so FieldCraft's Help › Check for Updates can verify and install this release.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- docs: RFCs 0001 (electromagnetics) and 0002 (WARP3D fracture) by @jyviko in #972
- docs: the README links the latest release first by @jyviko in #974
- README: centred header with direct download buttons by @bherbruck in #976
- docs: RFC 0002 decides the port, and takes what the deck proposal solved by @jyviko in #975
- docs: RFC 0001, notes on phase 1 from the phases 2–4 side by @jijinbei in #977
- docs: RFC 0001's proposal follows §8 by @jyviko in #978
- links: Support opens the Ko-fi membership tiers by @jyviko in #987
- docs: roadmap gaps from a user's linear static review by @jyviko in #985
New Contributors
Full Changelog: v0.8.1...v0.8.1-nightly.20261120.49.1
FieldCraft v0.8.1-nightly.20261119.46.1 (nightly)
Nightly build of develop at c1bec5b74, which passed CI's nightly run (the full gate, the heavy tests and the oracle). Nightlies are for trying what is coming; the newest 7 are kept. FieldCraft installed from a nightly is offered newer nightlies and newer releases; one installed from a release is never offered a nightly.
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Which file?
- macOS 11+ (Apple silicon): open
fieldcraft-0.8.1-nightly.20261119.46.1-macos-aarch64.dmgand
dragFieldCraft.apponto Applications. The command-line tool is included at
/Applications/FieldCraft.app/Contents/MacOS/fieldcraft-cliand also available separately in
fieldcraft-cli-0.8.1-nightly.20261119.46.1-macos-aarch64.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.8.1-nightly.20261119.46.1-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.8.1-nightly.20261119.46.1-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.8.1-nightly.20261119.46.1-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. SHA256SUMS.txt is signed with the FieldCraft release key (SHA256SUMS.txt.minisig), so FieldCraft's Help › Check for Updates can verify and install this release.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- docs: clean-room rules for the solver match the governance guide by @jyviko in #944
- docs: openly published benchmark values may be cited as references by @jyviko in #945
- release: nightly pre-releases of develop by @jyviko in #948
- ui: the browser shows the setup as it is reached by @jyviko in #951
- ui: no JSON and no command ids in front of a person by @jyviko in #952
- deps: bump the cargo-compatible group with 5 updates by @dependabot[bot] in #949
- lbm-gpu: close TRT mass after f32 relaxation by @valo in #932
- ui: the kit-message test resolves only the target's packages by @jyviko in #955
- ui: a start page from the kit in the workspace's place by @jyviko in #947
- ui: right-side kit cards, History docks, centred navigation by @jyviko in #953
- ui: New and Open start the interface afresh by @jyviko in #956
- ui: with History at the top, the browser's column runs below it by @jyviko in #957
- docs: Ko-fi funding link and Sponsor button by @jyviko in #968
- ui: Settings is the kit's Preferences window by @jyviko in #959
- geometry: SolidCraft v0.42.0; designs from SolidCraft 0.41 and 0.42 open by @jyviko in #960
- ui: Donate and Discord pills in the title bar by @jyviko in #961
- release: 0.8.1 by @jyviko in #970
New Contributors
Full Changelog: v0.8.0...v0.8.1-nightly.20261119.46.1
FieldCraft v0.8.0-nightly.20261117.38.1 (nightly)
Nightly build of develop at 529685755, which passed CI's nightly run (the full gate, the heavy tests and the oracle). Nightlies are for trying what is coming; the newest 7 are kept. FieldCraft installed from a nightly is offered newer nightlies and newer releases; one installed from a release is never offered a nightly.
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Which file?
- macOS 11+ (Apple silicon): open
fieldcraft-0.8.0-nightly.20261117.38.1-macos-aarch64.dmgand
dragFieldCraft.apponto Applications. The command-line tool is included at
/Applications/FieldCraft.app/Contents/MacOS/fieldcraft-cliand also available separately in
fieldcraft-cli-0.8.0-nightly.20261117.38.1-macos-aarch64.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.8.0-nightly.20261117.38.1-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.8.0-nightly.20261117.38.1-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.8.0-nightly.20261117.38.1-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. SHA256SUMS.txt is signed with the FieldCraft release key (SHA256SUMS.txt.minisig), so FieldCraft's Help › Check for Updates can verify and install this release.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- lbm: refuse the unstable halfway Spalding wall model by @bluecmd in #827
- lbm: remove the disabled halfway study option by @bluecmd in #843
- solve.probe: report each transient heat frame's own heat flux (#822) by @bluecmd in #844
- solver: normalise contact gaps over the paired secondary faces only (#775) by @bluecmd in #845
- lbm: stop uniform pressure outlets amplifying round-off by @bluecmd in #826
- Fluid measurements: face averages, flow, wall heat and pressure drop, first slice (#837) by @bluecmd in #847
- nix: flake with dev shells and packages by @ppenguin in #852
- Relax round-off: the issue's samples as a regression test; strong relax's hex20 term and harmonic solve (#612) by @bluecmd in #853
- lbm: measure requested applied and carried wall stress (#786) by @bluecmd in #829
- Thin conducting walls between fluid passages, first slice (#836) by @bluecmd in #846
- lbm: share statistical acceptance across LES studies (#796) by @bluecmd in #828
- lbm: report sampled numerical validity for fluid runs (#793) by @bluecmd in #830
- decks: LS-DYNA writes beam sections as resultant beams by @jyviko in #863
- model: the check names output a step will not write by @jyviko in #864
- roadmap: M1 and M3 done by @jyviko in #862
- mesh.verify: quality and certified validity of one set's elements by @jyviko in #866
- model, engine: seeds and the hex planner from portable maths (#115) by @jyviko in #867
- ui: FieldCraft's own accent, violet by @jyviko in #869
- mesh: periodic faces keep their seams for the hex meshers; layers from every cross-section vertex by @jyviko in #871
- mesh: faces with exact surfaces have no creases inside; the surface check names facets facing the other way by @jyviko in #873
- build: Rust 1.98.0 everywhere, named once in rust-toolchain.toml by @jyviko in #877
- deps: bump the cargo-compatible group across 1 directory with 5 updates by @dependabot[bot] in #868
- Radiation to the surroundings from solid surfaces (#839) by @bluecmd in #850
- roadmap: quick bolts and welds for assembly investigations (M7) by @jyviko in #880
- ci: bless corpus fixtures on Linux x86_64 in a manual workflow, not Docker by @jyviko in #879
- geometry: SolidCraft at 5e33828 (solidcore kernel), adopting its face names; hex curvature floor and round-disk O-grid by @jyviko in #870
- ui: SolidCraft's UI kit and look: FieldCraft looks like SolidCraft by @jyviko in #872
- mesh.tet.generate: an exact edge seed keeps its count (#894) by @jyviko in #897
- ci: Dependabot leaves rfd and the Rust toolchain to move with SolidCraft by @jyviko in #893
- mesh: chordal-deviation curve floor for hex meshes; revolve a straight tube (#895) by @jyviko in #898
- deps: SolidCraft 81dd685a (face_surface #15094, Surface::Blend #15010, mesh path #15446) by @jyviko in #917
- mesh.tet.generate: an edge seed's node is not lost to a flat cavity (#901) by @jyviko in #902
- cli: a closed stdout ends the output instead of panicking (#799) by @thomschlie in #874
- roadmap: 0.8.0, a refreshed Next, and SolidCraft's kit and look by @jyviko in #900
- build: Rust 1.99.1 everywhere by @jyviko in #918
- mesh: per-face seeds (mesh.seed.face), the last M2 item by @jyviko in #886
- ui: commands ↔ UI one to one by @jyviko in #919
- ui: SolidCraft's kit throughout by @jyviko in #924
- ui: layout and alignment by @jyviko in #921
- geometry: surface meshes from solidcore_tess::mesh, with the mesher fixes it needs by @jyviko in #923
- ui: analyst-flow fixes and the control channel by @jyviko in #922
- Fluid: interpolated walls (Bouzidi linear bounce-back) at obstacles, CPU and GPU by @jyviko in #928
- ui: SolidCraft's floating shell: browser, ribbon and History cards over a full-bleed viewport by @jyviko in #930
- release: 0.8.0 by @jyviko in #931
- ci, release: run the macOS jobs on macos-15 by @jyviko in #933
- oracle: cdt-cylinder's volume is gated by its band, not frozen by @jyviko in #934
- ci: the macOS release build gets three hours, enough for a cold cache by @jyviko in #936
- release: macOS ships for Apple silicon only, and its cache survives a failed job by @jyviko in #942
- docs: clean-room rules for the solver match the governance guide by @jyviko in #944
- docs: openly published benchmark values may be cited as references by @jyviko in #945
- release: nightly pre-releases of develop by @jyviko in #948
- ui: the browser shows the setup as it is reached by @jyviko in #951
- ui: no JSON and no command ids in front of a person by @jyviko in #952
- deps: bump the cargo-compatible group with 5 updates by @dependabot[bot] in #949
- lbm-gpu: close TRT mass after f32 relaxation by @valo in #932
- ui: the kit-message test resolves only the target's packages by @jyviko in #955
- ui: a start page from the kit in the workspace's p...
FieldCraft v0.8.0
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Which file?
- macOS 11+ (Apple silicon): open
fieldcraft-0.8.0-macos-aarch64.dmgand
dragFieldCraft.apponto Applications. The command-line tool is included at
/Applications/FieldCraft.app/Contents/MacOS/fieldcraft-cliand also available separately in
fieldcraft-cli-0.8.0-macos-aarch64.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.8.0-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.8.0-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.8.0-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. SHA256SUMS.txt is signed with the FieldCraft release key (SHA256SUMS.txt.minisig), so FieldCraft's Help › Check for Updates can verify and install this release.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- lbm: refuse the unstable halfway Spalding wall model by @bluecmd in #827
- lbm: remove the disabled halfway study option by @bluecmd in #843
- solve.probe: report each transient heat frame's own heat flux (#822) by @bluecmd in #844
- solver: normalise contact gaps over the paired secondary faces only (#775) by @bluecmd in #845
- lbm: stop uniform pressure outlets amplifying round-off by @bluecmd in #826
- Fluid measurements: face averages, flow, wall heat and pressure drop, first slice (#837) by @bluecmd in #847
- nix: flake with dev shells and packages by @ppenguin in #852
- Relax round-off: the issue's samples as a regression test; strong relax's hex20 term and harmonic solve (#612) by @bluecmd in #853
- lbm: measure requested applied and carried wall stress (#786) by @bluecmd in #829
- Thin conducting walls between fluid passages, first slice (#836) by @bluecmd in #846
- lbm: share statistical acceptance across LES studies (#796) by @bluecmd in #828
- lbm: report sampled numerical validity for fluid runs (#793) by @bluecmd in #830
- decks: LS-DYNA writes beam sections as resultant beams by @jyviko in #863
- model: the check names output a step will not write by @jyviko in #864
- roadmap: M1 and M3 done by @jyviko in #862
- mesh.verify: quality and certified validity of one set's elements by @jyviko in #866
- model, engine: seeds and the hex planner from portable maths (#115) by @jyviko in #867
- ui: FieldCraft's own accent, violet by @jyviko in #869
- mesh: periodic faces keep their seams for the hex meshers; layers from every cross-section vertex by @jyviko in #871
- mesh: faces with exact surfaces have no creases inside; the surface check names facets facing the other way by @jyviko in #873
- build: Rust 1.98.0 everywhere, named once in rust-toolchain.toml by @jyviko in #877
- deps: bump the cargo-compatible group across 1 directory with 5 updates by @dependabot[bot] in #868
- Radiation to the surroundings from solid surfaces (#839) by @bluecmd in #850
- roadmap: quick bolts and welds for assembly investigations (M7) by @jyviko in #880
- ci: bless corpus fixtures on Linux x86_64 in a manual workflow, not Docker by @jyviko in #879
- geometry: SolidCraft at 5e33828 (solidcore kernel), adopting its face names; hex curvature floor and round-disk O-grid by @jyviko in #870
- ui: SolidCraft's UI kit and look: FieldCraft looks like SolidCraft by @jyviko in #872
- mesh.tet.generate: an exact edge seed keeps its count (#894) by @jyviko in #897
- ci: Dependabot leaves rfd and the Rust toolchain to move with SolidCraft by @jyviko in #893
- mesh: chordal-deviation curve floor for hex meshes; revolve a straight tube (#895) by @jyviko in #898
- deps: SolidCraft 81dd685a (face_surface #15094, Surface::Blend #15010, mesh path #15446) by @jyviko in #917
- mesh.tet.generate: an edge seed's node is not lost to a flat cavity (#901) by @jyviko in #902
- cli: a closed stdout ends the output instead of panicking (#799) by @thomschlie in #874
- roadmap: 0.8.0, a refreshed Next, and SolidCraft's kit and look by @jyviko in #900
- build: Rust 1.99.1 everywhere by @jyviko in #918
- mesh: per-face seeds (mesh.seed.face), the last M2 item by @jyviko in #886
- ui: commands ↔ UI one to one by @jyviko in #919
- ui: SolidCraft's kit throughout by @jyviko in #924
- ui: layout and alignment by @jyviko in #921
- geometry: surface meshes from solidcore_tess::mesh, with the mesher fixes it needs by @jyviko in #923
- ui: analyst-flow fixes and the control channel by @jyviko in #922
- Fluid: interpolated walls (Bouzidi linear bounce-back) at obstacles, CPU and GPU by @jyviko in #928
- ui: SolidCraft's floating shell: browser, ribbon and History cards over a full-bleed viewport by @jyviko in #930
- release: 0.8.0 by @jyviko in #931
- ci, release: run the macOS jobs on macos-15 by @jyviko in #933
- oracle: cdt-cylinder's volume is gated by its band, not frozen by @jyviko in #934
- ci: the macOS release build gets three hours, enough for a cold cache by @jyviko in #936
- release: macOS ships for Apple silicon only, and its cache survives a failed job by @jyviko in #942
New Contributors
- @ppenguin made their first contribution in #852
- @thomschlie made their first contribution in #874
Full Changelog: v0.7.5...v0.8.0
FieldCraft v0.7.5
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Before you update
- macOS: download this dmg once by hand. FieldCraft's application id changed from
io.github.jyviko.fieldcrafttoio.github.tangencylabs.fieldcraft, and a 0.7.0 app only
updates to an app signed with its own id, so it can't install this release itself. Download the
dmg below and drag the app to Applications; from 0.7.5 on, the app updates itself again. - Linux: a
.debor.rpmupgrade replaces the old desktop entry and icons; a pin or
favourite made with the old desktop id has to be made again. - Models are now stored in SI. A model saved by 0.7.0 or earlier opens and is converted from
its declared unit system; saving it keeps a copy of the file it replaces. Older FieldCraft
versions can't open a model saved by 0.7.5. - SolidCraft designs: FieldCraft now reads designs saved by SolidCraft up to 0.30.1 (design
format 48).
What's new
Electronics cooling and fluid flow
- Conjugate heat transfer: solids conduct heat inside the flow, on the CPU and the GPU, with
thermal contact resistance for pastes and pads. - Fans, vents and porous zones, and convective pressure outlets.
- Per-component temperature limits with pass/fail in the solve reply and the Results panel.
- Steady-state runs: the solve stops when its monitors settle and says why it stopped.
- The fluid solver's memory is bounded by the machine, with an estimate before the run and an
error that says what to change; long CPU runs can checkpoint and resume. - Turbulence: Smagorinsky and Vreman LES, wall models, and the regularised, hybrid recursive
regularised (HRR) and multiple-relaxation-time collisions, verified against published channel
flows. - Free-surface flow by volume of fluid (fill levels, the liquid front and depth), melting and
freezing, and shear-dependent viscosity (power law, Carreau–Yasuda, Cross, Cross-WLF). - Line probes, inlet and outlet transport in the Results panel, and animated fluid frames.
Structural
- Initial temperature and stress fields, mapped between meshes.
- Mortar contact on quadratic elements (tet10, hex20).
- Incompatible-mode hex8 and quad4 in nonlinear steps, and finite-strain kinematic hardening.
- Load paths per load in nonlinear static steps, with reactions per frame and force–travel curves.
- Stress linearisation along a path (ASME VIII-2 Annex 5-A) and interactive result path plots.
- Verified against five more NAFEMS benchmarks: LE2, LE3, LE5, LE6 and LE7.
Models, files and workflow
- Import Abaqus input files (model data, with explicit units and a report of unread keywords) and
Gmsh.msh4.1 meshes with their physical groups. - A cited SI material catalogue.
- Project files keep solved results, saved views and renders, preferred run settings and,
optionally, the geometry; a project opens with the camera it was saved with. - Renamed SolidCraft faces are found again when a model opens, and a stale name is reported,
never dropped silently. - Linux: a Flatpak built from source.
Faster
- Tetrahedral meshing quality stage up to 35 % fewer instructions, octree hex smoothing up to
46 %, explicit dynamics 22–34 %, and a parallel, vectorised supernodal factorisation, each
giving the same results bit for bit.
Known limitations
- LES results are under review (#785): treat turbulent drag and wall-stress numbers as provisional.
- The GPU solver needs a real GPU for its speed; CI checks it on a software device only.
Which file?
- macOS 11+ (Apple silicon and Intel): open
fieldcraft-0.7.5-macos-universal.dmgand
dragFieldCraft.apponto Applications. The command-line tool is included at
/Applications/FieldCraft.app/Contents/MacOS/fieldcraft-cliand also available separately in
fieldcraft-cli-0.7.5-macos-universal.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.7.5-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.7.5-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.7.5-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. SHA256SUMS.txt is signed with the FieldCraft release key (SHA256SUMS.txt.minisig), so FieldCraft's Help › Check for Updates can verify and install this release.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- mesh: an angle exactly on the 135-degree threshold is not a corner, whichever way it rounds by @bluecmd in #569
- engine: draw an obstacle face held at a temperature at that temperature by @bluecmd in #571
- github: claim and triage bots (ported from SolidCraft) by @jyviko in #580
- tests: NAFEMS LE2, LE3, LE5, LE7 oracle cases by @bluecmd in #573
- engine: report principal stresses in solve.probe by @bluecmd in #577
- ci: draft pull requests start no run; marking one ready does by @jyviko in #581
- Examples gallery: flow-past start-up transient clip and solved still (#164) by @bluecmd in #578
- Units: SI unit table and parsing, inventory, literal-factor report (#579 steps 1-2) by @jyviko in #583
- solver: order by planes or graph dissection, whichever fills less by @jyviko in #585
- solver: reactions per nonlinear frame, force-travel curves by @jyviko in #586
- docs: oracle.md as CI generates it after the fill-reducing ordering by @jyviko in #589
- oracle: keep rounding noise off docs/oracle.md by @jyviko in #593
- lbm, engine: run a fluid step to steady state with a stop rule by @jyviko in #595
- tests: NAFEMS LE6 skew plate oracle case by @bluecmd in #600
- Fans and vents in the flow solver: pressure–flow curve and porous resistance by @jyviko in #596
- io: format versions, migration and backups; format 2 (#579, PR A) by @jyviko in #602
- mesh: projection smoothing on threads and on the GPU (#409) by @bluecmd in #575
- test: flow fixtures open the plate from a folder of their own by @jyviko in #615
- CI on Blacksmith (sponsored) + README sponsor banner by @bherbruck in #618
- Units: store every quantity in SI, format 3 (#579, PR B) by @jyviko in #603
- ui: keep the results legend clear of the selection bar by @bluecmd in #608
- lbm-gpu: the verification tests take the GPU one at a time by @bluecmd in #616
- ui-egui: the two tests that open a GPU device take turns by @bluecmd in #619
- engine: fix the heavy explicit cantilever test after #603 by @jyviko in #622
- docs: Eulerian solid research results (#594) by @jyviko in #620
- solver: nonlinear convergence norms by kind of freedom (#579) by @jyviko in #621
- SolidCraft v0.16.2: open designs saved by current SolidCraft (#605) by @jyviko in #613
- ui: samples and opens run as jobs, display data built off the window thread (#552) by @bluecmd in #611
- Examples: electronics cooling studies (heat sink, enclosure, AIO) by @bluecmd in #587
- app: fit the first window to a small monitor's work area by @bluecmd in #607
- lbm: a regularised collision that stays stable with τ⁺ near ½ (#557) by @jyviko in #627
- oracle: de Vahl Davis cavity at Ra 10³–10⁶, heated block pending (#623) by @jyviko in #628
- gpu: on Linux, ask Vulkan first and bring up GL only when it is needed by @bluecmd in #630
- xtask: unit-factors at 0 outside the geometry frame, and a CI gate (#579) by @jyviko in https://github.com/tangency-l...
FieldCraft v0.7.0
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
What's new in 0.7.0: agentic hex meshing (#AHM)
0.7.0 is the meshing release: an agent (or you) looks at the part, plans the blocks from how it was built, and gets an all-hex mesh, then checks and repairs it.
- Block plans from the feature graph.
geometry.featuresreplays a SolidCraft design's timeline;mesh.planturns it into blocks (O-grid/butterfly rings round holes and bosses, swept and projected cells) andmesh.plan.applymeshes them. Symmetric bodies are meshed by their symmetry and mirrored, conforming on the plane. - Sizing. Local size controls on faces, bodies, boxes and spheres with a growth rate (
mesh.size.*), honoured by every mesher; curvature-based divisions so curved faces lose at most 0.5 % of volume. - Clean-up before meshing.
geometry.checkfinds short edges, slivers and near faces;geometry.defeaturesuppresses holes, fillets and bosses (with a proposal panel); virtual topology merges, absorbs, splits and stitches faces. - Quality and repair.
mesh.quality.marktags the bad elements in red; strong relaxation morphs the region round them (now a background job, adjustable reach and guards) and returns its best round; new Move Nodes tool to drag nodes on the surface with a ghost of the original and live quality. - More meshers. Octree all-hex for parts a block plan does not suit; hex-to-tet transitions with pyramids; tet sliver and needle removal; the same mesh on every run and every platform.
- Responsive app. Plan apply, partitioning and cell meshing run as background jobs with progress and cancel.
- Fluid. A GPU backend for the lattice Boltzmann solver (wgpu, checked against the CPU), velocity, pressure and temperature slices, surface colouring and streamlines, heat carried by the flow with buoyancy and the heat into every wall.
- Verification. Scordelis–Lo roof and pinched cylinder shell benchmarks join the reference cases.
Thank you to @bluecmd for the GPU lattice Boltzmann backend, the flow results view, heat in the flow and a careful Windows test pass, and to @erkinalp for the shell benchmarks.
Which file?
- macOS 11+ (Apple silicon and Intel): open
fieldcraft-0.7.0-macos-universal.dmgand
dragFieldCraft.apponto Applications. The command-line tool is included at
/Applications/FieldCraft.app/Contents/MacOS/fieldcraft-cliand also available separately in
fieldcraft-cli-0.7.0-macos-universal.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.7.0-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.7.0-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.7.0-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. SHA256SUMS.txt is signed with the FieldCraft release key (SHA256SUMS.txt.minisig), so FieldCraft's Help › Check for Updates can verify and install this release.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- solver: share Cholesky and LDLT solve kernel by @facelessdevhack in #405
- Bundle the macOS CLI inside FieldCraft.app by @facelessdevhack in #403
- Swept cross-sections: square corners round rectangular openings, no sliver blocks; ties say why (#397 #396) by @jyviko in #408
- mesh: projection blocking (mesh.hex.project) (#399) by @jyviko in #410
- Projection Blocking form (fix develop tests) by @jyviko in #415
- mesh: provenance feature graph and mesh plans (#402 steps 1–2) by @jyviko in #412
- Hex extrude up to a surface (#400) by @jyviko in #414
- ci: package releases in parallel with verify; only the draft waits for both by @jyviko in #416
- mesh: split blocks through their sheet; the cup with a handle meshes all-hex (#399) by @jyviko in #417
- Icon for Extrude to Surface (fix develop CI) by @jyviko in #419
- mesh: plan rings and fillet/chamfer blend layers via projection blocking (#402) by @jyviko in #420
- mesh: projection smoothing guards edge ratio and never leaves the grid worse (#418) by @jyviko in #421
- Headless snapshot: fieldcraft-cli snapshot draws with the viewport's GPU pipeline, no window by @jyviko in #423
- Headless snapshot part 2: --section, --field, labels, MCP screenshots on the GPU by @jyviko in #424
- mesh: project_trimmed accepted planar projections off the trimmed face; divisions follow curvature (max_arc_angle) by @jyviko in #425
- Export the mesh's outer surface as STL by @jyviko in #426
- mesh: a screw hole's ring takes in the fillet of its rounded corner (#402) by @jyviko in #429
- engine: the crank half y > 0 divides where its mirror does (#283) by @jyviko in #428
- Export results to VTU for ParaView by @jyviko in #430
- mesh: projection divisions from the mean edge length of each class (#418) by @jyviko in #440
- geometry.check: short edges, small and sliver faces, near faces against the element size by @jyviko in #441
- mesh.quality.mark: tag and locate the elements below quality limits by @jyviko in #442
- mesh: a disk's O-grid follows the region's elongation (#198) by @jyviko in #443
- geometry: a partition the kernel can only nudge off its plane is refused (#427) by @jyviko in #446
- app: a termination signal closes the window the normal way, not as a crash (#248) by @jyviko in #445
- mesh: an enclosure's corner bosses are ringed where its walls join them (#402) by @jyviko in #447
- mesh: the one-to-one sweep names a body that ends at several levels (#444) by @jyviko in #448
- app: leave SIGHUP alone so nohup keeps the app running (#248 follow-up) by @jyviko in #450
- ui: arc-length displacement limit as typed fields by @jyviko in #452
- Crash reports: the startup step, and native crash details on Windows (#299) by @jyviko in #451
- ui: nonlinear load path as a table of fraction and factor by @jyviko in #453
- ui: one number or one per axis for conductivity, expansion and point mass by @jyviko in #454
- ui: block divisions and bias as two or three typed fields by @jyviko in #456
- ui: mirror plane and images as typed fields by @jyviko in #457
- ui: fluid boundary face and obstacle faces as typed fields by @jyviko in #458
- ui: element faces and edges as element:side lists by @jyviko in #459
- Geometry check: mark the findings in the viewport and snapshots by @jyviko in #460
- mesh: smoothing lifts elements up to 0.7 and visits mirror twins alike (#402) by @jyviko in #462
- mesh: smoothing visits nodes in their own order again (fixes develop CI, #402) by @jyviko in #464
- mesh: a plan's frame cut on an opening's end face moves one element out of it (#455) by @jyviko in #465
- results: results.xy, a series against the load factor, time or mode (#94) by @jyviko in #461
- mesh: a projection query searches the face's own triangles (Base 11 min to 40 s, #402) by @jyviko in #466
- ui: XY plot in the results panel (#94) by @...
FieldCraft v0.6.0
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Which file?
- macOS 11+ (Apple silicon and Intel): open
fieldcraft-0.6.0-macos-universal.dmgand
dragFieldCraft.apponto Applications. The command-line tool is in
fieldcraft-cli-0.6.0-macos-universal.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.6.0-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.6.0-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.6.0-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. SHA256SUMS.txt is signed with the FieldCraft release key (SHA256SUMS.txt.minisig), so FieldCraft's Help › Check for Updates can verify and install this release.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- Heat transfer across ties by @jyviko in #363
- ui: browser tree, selection and status messages bundle by @jyviko in #368
- ui: forms, command feedback, jobs with progress and the mesh workflow by @jyviko in #370
- geometry: void shells and what is joined to them come through on open (#364) by @jyviko in #372
- ui: picking geometry and partitioned models (#338 #344 #346 #349 #350 #351) by @jyviko in #373
- ui: results display — units, clean numbers, extremes, reactions, solve summary, hidden bodies by @jyviko in #369
- model: long persistent face names mesh (#374) by @jyviko in #375
- ui: older UI/UX bundle — rename, suppress, translucent datums, perspective edges, sample thumbnails, #371 follow-ups by @jyviko in #376
- Attribute the void-shell test designs (fix develop CI) by @jyviko in #377
- Jobs: Cancel interrupts the running solver or mesher by @jyviko in #378
- ui: legend clamp, CSV export, quality panel, file.new, ibeam sample, crash reports, typed fields by @jyviko in #379
- mesh: soundness bundle (partition errors, seed bias carry, node tools, tet insertion spacing, hex20 tangent crank) by @jyviko in #381
- Ready 0.6.0: end-to-end pass fixes, regenerated gallery, ROADMAP and docs by @jyviko in #383
- ci: release secrets from the main-only release environment by @jyviko in #382
- Agentic hex meshing skill (fieldcraft-meshing) by @jyviko in #386
- Make empty text fields visible in the light theme by @facelessdevhack in #387
- Solver: check for cancellation on entry (fix develop CI) by @jyviko in #391
- build(deps): upgrade quick-xml to 0.42 by @facelessdevhack in #390
- ci: THIRD-PARTY-LICENSES.txt becomes a release artifact by @jyviko in #392
- CI: test only what a change affects on develop; run everything nightly and at release by @jyviko in #393
- AHM core: swept cells conform, tie conflicts, partition cuts and stale meshes (#389 #288 #388 #384 #385) by @jyviko in #395
- Allow bounded factor-memory overrides up to 2B entries by @facelessdevhack in #394
- Share static equilibrium core with buckling preload by @facelessdevhack in #401
- mesh: node relaxation with UV surface slides and reusable relaxation fields (#398) by @jyviko in #404
- build(deps): upgrade zip 3 → 9 by @Skywalkingzulu1 in #380
- Release 0.6.0 by @jyviko in #406
- Fix clippy on develop (collapsible if in reply.rs) by @jyviko in #407
New Contributors
- @Skywalkingzulu1 made their first contribution in #380
Full Changelog: v0.5.9...v0.6.0
FieldCraft v0.5.9
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Which file?
- macOS 11+ (Apple silicon and Intel): open
fieldcraft-0.5.9-macos-universal.dmgand
dragFieldCraft.apponto Applications. The command-line tool is in
fieldcraft-cli-0.5.9-macos-universal.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.5.9-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.5.9-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.5.9-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Updates. This release's SHA256SUMS.txt is not signed: FieldCraft's in-app updates can't verify it and won't install it; download it from this page instead.
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- Browser item menu, per-item visibility, datum point, separate datum ribbon entries by @jyviko in #292
- Start card: every sample reachable, as cards with thumbnails by @jyviko in #293
- Crash reports, a log file and Help › Report a Bug (#107) by @jyviko in #298
- Datums: drawn at the model's extent, hidden once a partition uses them, never framed by @jyviko in #301
- Opt-in anonymous usage analytics (PostHog Cloud EU) (#238) by @jyviko in #304
- web: PostHog key in the deployed browser build by @jyviko in #306
- Mesh: swept cross-sections cut into blocks automatically by @jyviko in #307
- Engine: half crank extrudes in blocks via mesh.hex.generate and mesh.cells by @jyviko in #308
- In-app updates: check, verify (signed SHA256SUMS) and install; reinstall; web Reload to update by @jyviko in #309
- Samples: the crank from one datum, its half extruded in automatic blocks by @jyviko in #310
- Mesh: refinement splits the feature edge a face-edge midpoint encroaches (heated bracket opens in 5 s again) by @jyviko in #312
- engine: heated-bracket guard without a wall-time limit by @jyviko in #313
- release: version 0.5.9 by @jyviko in #314
Full Changelog: v0.5.8...v0.5.9
FieldCraft v0.5.8
FieldCraft is open-source CAE pre-processing in Rust: it turns geometry into analysis-ready
finite element models, writes Abaqus, Nastran and LS-DYNA decks, and solves linear static and
modal problems with its own solver. AI agents can drive it over MCP (fieldcraft-cli mcp).
README ·
roadmap ·
issues
Which file?
- macOS 11+ (Apple silicon and Intel): open
fieldcraft-0.5.8-macos-universal.dmgand
dragFieldCraft.apponto Applications. The command-line tool is in
fieldcraft-cli-0.5.8-macos-universal.zip. - Linux (x86_64, glibc 2.35+: Ubuntu 22.04, Debian 12, Fedora 36 or newer):
fieldcraft-0.5.8-linux-x86_64.AppImage(chmod +x, then run it), or unpack
fieldcraft-0.5.8-linux-x86_64.tar.gzand runbin/fieldcraft(bin/fieldcraft-cliis the
command-line tool). - Windows 10+ (x64): unzip
fieldcraft-0.5.8-windows-x64.zipand runfieldcraft.exe
(fieldcraft-cli.exeis the command-line tool). SHA256SUMS.txt:sha256sum -c SHA256SUMS.txt --ignore-missing(macOS:
shasum -a 256 -c SHA256SUMS.txt --ignore-missing).
To start with a sample model, run the app with --sample cantilever (macOS:
/Applications/FieldCraft.app/Contents/MacOS/FieldCraft --sample cantilever).
Signing. The macOS app is signed with a Developer ID and notarized by Apple. The Linux and Windows builds are not signed; on Windows, SmartScreen
may say "Windows protected your PC": choose More info, then Run anyway.
Every package carries LICENSE-MIT, LICENSE-APACHE, NOTICE and THIRD-PARTY-LICENSES.txt.
What's Changed
- Implicit mortar contact in nonlinear static steps (M7, part of #161) by @jyviko in #180
- Coulomb friction for implicit mortar contact (M7, part of #161) by @jyviko in #181
- Ties between non-matching meshes by dual mortar (M7, part of #161) by @jyviko in #183
- Implicit self-contact (general contact) for folding rubber (M7, part of #161) by @jyviko in #184
- Examples gallery: five ready-to-solve samples and the README gallery by @jyviko in #192
- engine: crank-arm sample, a bicycle crank swept all-hex and solved by @jyviko in #196
- Contact in 2D models: edge mortar, plane strain and axisymmetric, with hybrid 2D elements by @jyviko in #199
- engine: heated-bracket heavy test tolerance for the Linux mesh by @jyviko in #208
- release: Linux .deb and .rpm packages by @jyviko in #195
- docs: examples gallery as an even grid by @jyviko in #209
- Results view: hover over contours is an outline, not a pink fill by @jyviko in #210
- Opening a design of another part: start a new model or keep it, and say what is stale by @jyviko in #213
- Form fields keep their typing and focus to their own form by @jyviko in #225
- A new model is untitled; undo brings the old file back (#214) by @jyviko in #226
- Commands say what they need; the UI greys what the model cannot run yet by @jyviko in #228
- deps: move the SolidCraft pin to a629236 (main, 2026-10-14) by @jyviko in #232
- Partitions inside FieldCraft: datum planes and axes, geometry.partition by @jyviko in #239
- mesh.cells: mesh a partitioned part cell by cell, hex–tet joined by ties by @jyviko in #240
- mesh.mirror: reflect a meshed half across a plane into one conforming mesh by @jyviko in #241
- model.boundary_condition.symmetry: symmetry on a datum plane, half model = whole by @jyviko in #243
- UI: command replies read as one line, the whole reply in the context panel by @jyviko in #244
- Sample crank-mirror and MCP docs for partition, cells, mirror and symmetry by @jyviko in #246
- Reference fields: always a drop-down, Create … when empty, single candidate preselected by @jyviko in #249
- Design edges: persistent names and picking (edge seeds, part 1) by @jyviko in #250
- Edge seeds: mesh.seed.edge, ticks in the viewport, Mesh › Seeds (edge seeds, part 2) by @jyviko in #251
- Form problems name fields by their labels; OK waits for required fields by @jyviko in #252
- Schema: a problem carries its field and a structured kind by @jyviko in #254
- Edge seeds: the meshers honour them (edge seeds, part 3) by @jyviko in #256
- Forms: field help, units without a unit system, X/Y/Z captions by @jyviko in #259
- UI: no cut-off labels in forms, the command line, the status bar and the browser by @jyviko in #264
- A setup checklist: the next step after opening a design by @jyviko in #265
- Automation runs keep autosaves out of the user's recovery folder; Recover lists age and Discard all by @jyviko in #271
- Hex20 edges meet their faces at any zoom; mesh conformity check by @jyviko in #272
- Views: one framing rule for open, results, fit, home and standard views by @jyviko in #275
- Ribbon: Hex Mesh and Partitioned Mesh replace the duplicate hex entries by @jyviko in #277
- EngineError::Param carries the schema Problem; Required phrased by field kind by @jyviko in #276
- Meshers replace the mesh of the body they mesh, with a confirmation in the app by @jyviko in #278
- Browser: setup progress on the tree; remove the SETUP card by @jyviko in #279
- engine: crank-arm conformity test without a platform-dependent element count by @jyviko in #280
- Navigation: orbit about the point under the cursor, zoom toward it, SolidCraft's presets by @jyviko in #281
- Setup symbols: wireframe, one mark per held DOF, constant size on screen by @jyviko in #284
- Crank samples: structured hex from a partitioned half and its mirror by @jyviko in #287
- release: version 0.5.8 by @jyviko in #289
Full Changelog: v0.5.7...v0.5.8