Repository navigation
Beamer 1.5.1
Beamer 1.5.1 is the first full release in the 1.5 series, after the 1.5.0 beta. It adds Intel Mac support, experimental Linux support, pairing between machines of the same kind, and use across three machines.
Downloads
- macOS 13 or later, Apple silicon and Intel:
Beamer-1.5.1.dmg, a universal app signed and notarised by Apple. - Windows 10 and 11, 64-bit:
Beamer-Setup-1.5.1.exe. - Linux, experimental, 64-bit x86:
Beamer-1.5.1-x86_64.flatpak. Install it withflatpak install --user Beamer-1.5.1-x86_64.flatpak; Flathub supplies the KDE runtime if it is not already installed. It has been tested on one Fedora 44 GNOME desktop under Wayland, paired with a Mac and with a Windows PC. To build it yourself, or for another architecture, follow the Linux instructions.
The Windows installer is not code-signed, so Windows may show “Windows protected your PC”. Choose More info, then Run anyway.
Before you install
Beamer 1.5 uses wire version 6. It cannot connect to Beamer 1.4.x, so update every machine you pair together.
Beamer brings your 1.4.x settings into its new settings file. The old pairing stays listed but does not connect. Pair the machines again. If you pair the same machine at its saved address and platform, Beamer keeps its side and crossing zones. Other settings, including your key mapping, crossing resistance, effects and colour, carry over. The old settings file stays in place.
The 1.4.x settings file is kept for a downgrade, but changes made in 1.5 do not flow back to it. To use a 1.4.x pairing again, downgrade both machines and use the original 1.4.x pairing.
Fixed since the 1.5.0 beta
- A machine that is switched off keeps its place. When a paired machine is not connected, a clash with its zones no longer turns off the edge of the machine you are using: its zones are set aside instead, and come back when it connects. Before, an old entry for a machine that never connects could hold the edge you needed, leaving input stranded on the other machine.
- A pairing the other machine has removed is said once. If the other machine no longer has the pairing, Beamer now says "name no longer has this pairing: remove name here and pair the two again" in its window, and tries every 30 seconds instead of every 2.
- Crash details. An error that ends one of Beamer's background tasks is now written to Beamer.log, and on a Mac a crash also leaves crash.log beside it, so a report can say where it happened.
- Mac: no grey square, and the first click counts. While input is on another machine, the Mac no longer shows a faint grey square round the pointer, and when input comes home the first click goes to the app under the pointer instead of being swallowed.
- Key boxes on Windows and Linux. In the Shortcut and Stays on this PC boxes, the hint "Click, then press the key" no longer wraps and gets cut off, at any display scaling.
What is new in 1.5
- The settings window has a redesigned layout. Pages adapt to the window size, style families sit in rows, and segmented controls fit their labels.
- Twenty-six new colours: two more each in Membrane, Sparks and Instrument, Aurora in Light, five each in the new Folio and Selvedge styles, a five-colour Bright group, and four greys that join White in a Mono group of its own.
- US machines use US spelling; other machines use British spelling.
- Intel Macs. The Mac app is now universal for Intel and Apple silicon Macs running macOS 13 or later.
- Mac to Mac, and Windows to Windows. Each key keeps its physical position between machines of the same kind. Mac and Windows pairs still map modifier keys by meaning; Windows can use a Mac keyboard layout, where Alt acts as Command and the Windows key as Option. Accent keys no longer get stuck on a PC while it drives another machine.
- Three machines. Set the zones on each machine and pair every machine directly with the others in a chain. The Mac menu and Windows tray can send input to a named machine, and each machine has its own In use switch and optional jump key.
- Linux, experimental. A Flatpak for GNOME under Wayland and for X11. On one Fedora 44 GNOME desktop under Wayland, the window and tray, pairing with a Mac and with a Windows PC, crossing both ways, typing and the clipboard work. On Wayland, the desktop limits what Beamer can do:
- “On Wayland the shortcut only brings input back: the desktop lets input go to another machine only when the pointer pushes through an edge, and keys on the Stays on this PC list cannot stay here while input is away.”
- “On Wayland Beamer cannot see a full-screen app, or a mouse button held before the pointer reaches an edge, so the edges are never held for one and a drag can cross.”
- “On Wayland the desktop does not let Beamer draw at the edges of the screen, so crossings show no effect on this machine. The other machines still show theirs.”
- Same on all machines. Keep crossing resistance, drag protection and shortcut settings in step, along with effect style, colour, size, length and arrival animation. Zones, jump keys, direction switches, full-screen hold, whether effects animate, and window appearance stay local.
- Match design. Choose from machines connected now and follow their style, colour, size, length and arrival animation. Those Design controls lock while following, with a Stop following banner. Animation enable and window appearance stay local; the Mac's notch and trackpad settings stay on that Mac.
- Crossing no longer switches itself off. If Windows or macOS briefly cannot say where the pointer is, Beamer skips that moment and keeps crossing, instead of stopping until you moved the pointer on the other machine (GitHub #9).
- Mac Beam. The Beam effect now fades softly inward from the edge, like it does on Windows.
- Pairing over a VPN. Pairing works when a VPN such as Tailscale has a route for your home network, and on networks larger than the usual home range.
- Full-screen hold. On macOS and Windows, choose whether full-screen apps on a screen hold its edges. It is off by default, does not apply to Beamer's own window, and leaves shortcuts and jump keys working.
- Size and effects. Choose Small, Medium or Large; the size scales with the screen and changes depth on styles that use it, not crossing resistance. Length changes playback time. Aperture joins Glow and Beam in Light; Folio adds Crease, Pleat and Concertina; Selvedge adds Thread, Weave and Jacquard.
- A settings window that uses the screen. Double-click its top to fill the screen. Pages widen with the window, and on a wide screen Crossing and Design put their controls beside the diagram and the styles.
- A clearer pairing flow. Pairing digits are centred, and Pair a machine is at the top of Overview.
- Smoother Mac resizing. Resizing and scrolling stay responsive as the window changes size.
- Windows scaling. Settings remain correctly laid out at 125% and 150% display scaling.
- A new link protocol. Each connection uses fresh X25519 keys with PyNaCl's libsodium implementation of ChaCha20-Poly1305. The token is not sent; a token learned later cannot decrypt a recorded 1.5.0 connection.
Known limits
On Wayland, input leaves only through an edge; the shortcut brings it back, keys on the Stays list cannot stay local, full-screen apps cannot hold the edges, a drag can cross, and this machine shows no crossing effect. A character with no key in the desktop's layout is not typed. KDE Plasma and InputCapture v2 have not been tested.
Linux has been tested on one GNOME Wayland desktop paired with a Mac and with a Windows PC. On GNOME, crossings show no edge animation on the Linux machine, and the selected option in the settings window is not filled in. X11 on real hardware has not been tested. On X11, smooth scrolling from a physical mouse and layouts with three or more groups have not been verified. Linux does not offer gestures. The trigger key can reach the app under the pointer while input is at home.
A two-finger pinch and a two-finger swipe between pages on the Mac are not passed to the other machine yet; the three- and four-finger gestures are unaffected.
The fix for Tailscale subnet routes has been tested with a simulated network route, not on a machine using that route.
How to report
Open an issue at https://github.com/kalkman-code/beamer/issues and say which machines you have, which versions are on them and what you saw. Beamer's log folder is under Open log folder in the menu. If Beamer quits unexpectedly, attach Beamer.log from that folder; on a Mac, also attach crash.log beside it.
Updates
Beamer checks for public releases, not pre-releases. On Overview, choose Download when Beamer 1.5.1 is offered; 1.4.x and the 1.5.0 beta both offer it. Update every machine you use together before pairing them again.
SHA-256 checksums
cdb1b280ed6df55eb7e4cacd90a7afce364858e604e9faad0f537b9788097297 Beamer-1.5.1.dmg
37e082412ebea65e710944574b8303f8e1b9c0f499b849c848b657e3f2167862 Beamer-Setup-1.5.1.exe
0d17305ed67475fbdc84a08c5306d7900ee9095ac321ef47693279050c0acd8f Beamer-1.5.1-x86_64.flatpak