Skip to content

700 series Controller Firmware Updates (Linux)

Jump to bottom
Keith Pine edited this page Sep 30, 2022 · 117 revisions

Overview

This guide describes how to perform Over-The-Wire (OTW) firmware upgrades for Z-Wave 700-series (or later) controllers in a Linux environment, using freely available tools.

If using command line tools does not appeal to you, stop now and follow your vendor's official instructions, or contact them directly for support. See Disclaimer.

Other options:

  • Temporarily relocate your USB controller to a Windows PC and use the Silicon Labs PC Controller software
  • zw_programmer: The Z/IP Gateway software includes this CLI utility to program the controller firmware. This requires obtaining access to the Z/IP Gateway SDK download and the ability to compile it, which will be difficult for most.
  • zpc: The zpc service provided by the Silicon Labs Unify SDK has the ability to program the controller firmware. This requires obtaining access to a private GitHub project and the ability to compile it, which will be difficult for most.

Equipment Used

The following hardware and software were used in the creation of this guide:

  • Platform: Raspberry Pi4
  • OS: Raspberry Pi OS 64-bit (Debian 10)
  • Silicon Labs UZB7 USB controller (SLUSB001A)
  • minicom version 2.7.1
  • lrzsz version 0.12.21

Other Unix-like OS may work with this guide if they support USB serial devices, minicom, and lrzsz.

Confirmed to work with:

  • Raspberry Pi4 and Ubuntu 20.04 64-bit [*]
  • Raspberry Pi2 Model B and Raspberry Pi OS 32-bit
  • Synology NAS with a Debian 10.9 Docker container [*]

Confirmed not working:

  • Apple Silicon and MacOS, using homebrew installed lrzsz and minicom. Update seems to have no effect [*].

Firmware Downloads

The latest certified release is 7.18.1.

Most controllers use stock firmware images distributed by Silicon Labs via the Z-Wave SDKs. Some vendors also distribute their own files, but usually these are identical to the Silicon Labs versions. Links to both files are provided when available. If in doubt, choose the vendor's file.

Select your product to continue:

For other download options, see alternative downloads.

Missing a product? Let us know by submitting an issue.

Aeotec Z-Stick 7 or Z-Pi 7

The Z-Stick 7 and Z-Pi 7 controllers are a BRD4206A radio board (EFR32ZG14 chipset).

See Update Z-Stick 7 with Windows or Update Z-Stick 7 with Raspian OS / RPi for the official Aeotec update instructions.

MD5 checksum: abbc9a40ab1eaaef0b3cc4fa1daed366

Everspring SA370

The Zooz Everspring SA370 controller is the ZGM130S module but the radio board is currently unknown. It may be a BRD4202A or BRD4207A. Use those files at your own risk.

There are no official update instructions or downloads.

This section will be updated when the correct firmware files are known, and/or Everspring produces official instructions and downloads.

Refer to the 7.17.2 instructions otherwise.

HomeSeer SmartStick+ G3

The SmartStick+ G3 controller is a BRD4202A radio board (ZGM130S module).

See Updating SmartStick+ Firmware for the official HomeSeer update instructions.

The SmartStick+ G3 controller does not yet officially support the 7.18 firmware, but testing is in progress. Refer to this forum post for details. This section will be updated once the upgrade is out of testing.

Refer to the 7.17.2 instructions otherwise.

Silicon Labs UZB-7

The UZB-7 controller is a BRD4206A radio board (EFR32ZG14 chipset).

See Z-Wave 700: OTW of Controller or Z-Wave 700: Programming UZB7 Controller Stick for official Silicon Labs update instructions.

MD5 checksum: abbc9a40ab1eaaef0b3cc4fa1daed366

Z-Wave.Me RaZberry 7

⚠️ The RaZberry 7 controllers use custom firmware. Do not follow this guide or use any of the referenced firmware files. Visit UZB/RaZberry Firmwares for firmware and support.

Zooz ZST10 700

The Zooz ZST10 700 controller is the ZGM130S module but the radio board is currently unknown. It may be a BRD4202A or BRD4207A. Use those files at your own risk.

See How to Perform an OTA Firmware Update on Your ZST10 700 Z-Wave Stick for the official Zooz update instructions.

This section will be updated when the correct firmware files are known, and/or Zooz produces updated instructions and downloads.

Refer to the 7.17.2 instructions otherwise.

Alternative Downloads

By Radio Board

If you know your device's radio board identifier you can download the file directory from Silicon Labs files on GitHub, from the gbl directory.

With the 7.18 SDK, firmware files are no longer designated by chipset or module identifiers. Instead, the files are specific to radio boards. There are a variety of chipsets and radio boards a manufacturer can choose from. Verify with the vendor which radio board and firmware file is correct for your controller.

Zip Archive Download

Download the demo-applications.zip archive to download all firmware files at once.

Preparation

All commands listed here are being executed as the root user, to avoid any problems with permissions.

  1. Install minicom and file transfer utilities.

    apt install -y minicom lrzsz

  2. Determine the path to the Z-Wave controller's serial device. For a UZB7 and other 700-series USB controllers, this will typically be /dev/ttyUSB0.

  3. Set an environment variable for the USB path. This is used in commands below for easy copy and paste.

    export USBPATH=/dev/ttyUSB0

  4. Create a minicom profile named zwave that configures the serial port for FW upload. This configures the following settings:

    • Set serial port speed.
    • Disable hardware flow control.
    • Hide all file transfer choices except xmodem upload.
    cat << EOF > /etc/minicom/minirc.zwave
# Machine-generated file - use "minicom -s" to change parameters.
pu pname1           YUNYY
pu pname2           YUNYY
pu pname4           NDNYY
pu pname5           NDNYY
pu pname6           YDNYN
pu pname7           YUYNN
pu pname8           NDYNN
pu pname9           YUNYN
pu updir            /tmp
pu port             $USBPATH
pu baudrate         115200
pu bits             8
pu parity           N
pu stopbits         1
pu rtscts           No
EOF

    This is a one time setting and isn't necessary for future upgrades. The profile settings are stored in /etc/minicom/minirc.zwave.

  5. Download or copy the controller firmware file to /tmp.

  6. Stop zwavejs2mqtt or other zwave-js application so it doesn't interfere. Some users have reported that this step isn't necessary.

Installation

All commands listed here are being executed as the root user, to avoid any problems with permissions.

  1. Configure the serial port speed. minicom would normally do this, but we issue a couple commands from the shell.

    stty 115200 cs8 -cstopb -F $USBPATH

  2. Soft-reset the controller and wait long enough for it to recover.

    printf '\x01\x03\x00\x08\xf4' > $USBPATH && sleep 10

  3. Drop the controller into the bootloader.

    printf '\x01\x03\x00\x27\xDB' > $USBPATH && sleep 1

  4. Start minicom to connect to the device console. Be sure to use the profile configured previously.

    minicom -o zwave

  5. Press ENTER (one or more times) and you'll see the bootloader prompt. Enter 1 to upload the firmware. The letter C will be printed repeatedly to indicate that the controller is waiting for an upload.

    Gecko Bootloader v1.5.1
1. upload gbl
2. run
3. ebl info
BL >
begin upload
CCCC

  6. Enter CTRL-A s to open the file upload dialog. xmodem will be the only option, so select it. Navigate the menu so the firmware file is highlighted and select it with Spacebar, then press Enter to upload.

  7. When the upload finishes, select option 2 in the bootloader menu to run the new firmware. Some garbage characters will appear, meaning the firmware is running. Exit minicom with CTRL-A q and select Yes to exit.

  8. Start zwavejs2mqtt or other zwave-js application. If for some reason you have soft-reset disabled in zwave-js (not recommended), be sure to issue a soft-reset prior to starting the application. Confirm the controller firmware has changed to the expected version.

Disclaimer

⚠️ While the author has strived to provide accurate and up-to-date information and instructions, use this guide at your own risk. No warranty is implied nor will the author be liable for any damages arising from the use of this guide.

Clone this wiki locally