Integration LightBDD xUnit3

Integration Guide: LightBDD with xUnit 3

Example project: A complete working example is available at Example.Api/tests/Example.Api.Tests.Component.LightBDD.xUnit3/. You can reference it alongside this guide for a fully working implementation.

---

Overview

This guide walks you through integrating TestTrackingDiagrams with LightBDD using xUnit v3 as the test runner. After completing this guide, your LightBDD tests will automatically generate:

• PlantUML sequence diagrams from HTTP traffic between your service and its dependencies
• HTML reports with embedded diagrams (integrated into LightBDD's report pipeline)
• YAML specification files

LightBDD is a BDD framework that lets you write scenarios as C# method calls (given => ..., when => ..., then => ...) using its Runner.RunScenarioAsync pattern, with support for composite steps, tabular data, and rich reporting.

Migrating from LightBDD + xUnit 2? See Differences from xUnit 2 at the bottom of this guide.

---

Prerequisites

• .NET 8.0 SDK or later
• An ASP.NET Core API project to test (your "Service Under Test")
• Basic familiarity with LightBDD

---

Step 1: Create the Test Project

Create a new xUnit v3 test project:

dotnet new xunit -n MyApi.Tests.Component.LightBDD

Important: xUnit v3 test assemblies are standalone executables. Add <OutputType>Exe</OutputType> to your .csproj:

<PropertyGroup>
    <OutputType>Exe</OutputType>
</PropertyGroup>

---

Step 2: Install NuGet Packages

dotnet add package TestTrackingDiagrams.LightBDD.xUnit3
dotnet add package LightBDD.XUnit3
dotnet add package Microsoft.AspNetCore.Mvc.Testing
dotnet add package Microsoft.NET.Test.Sdk
dotnet add package xunit.v3
dotnet add package xunit.runner.visualstudio

Your <ItemGroup> should look like this:

<ItemGroup>
    <PackageReference Include="TestTrackingDiagrams.LightBDD.xUnit3" Version="1.24.10" />
    <PackageReference Include="LightBDD.XUnit3" Version="3.12.0" />
    <PackageReference Include="Microsoft.AspNetCore.Mvc.Testing" Version="10.0.5" />
    <PackageReference Include="Microsoft.NET.Test.Sdk" Version="18.3.0" />
    <PackageReference Include="xunit.v3" Version="3.2.2" />
    <PackageReference Include="xunit.runner.visualstudio" Version="3.1.5">
        <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
        <PrivateAssets>all</PrivateAssets>
    </PackageReference>
</ItemGroup>

---

Step 3: Create the LightBDD Scope Configuration

LightBDD for xUnit v3 uses a TestPipelineStartup to configure the test run. Create Infrastructure/ConfiguredLightBddScope.cs:

using System.Reflection;
using LightBDD.Core.Configuration;
using LightBDD.Framework.Configuration;
using LightBDD.XUnit3;
using TestTrackingDiagrams;
using TestTrackingDiagrams.LightBDD.xUnit3;
using Xunit.v3;

[assembly: TestPipelineStartup(typeof(ConfiguredLightBddScope))]

namespace MyApi.Tests.Component.LightBDD.Infrastructure;

public class ConfiguredLightBddScope : LightBddScope
{
    protected override void OnConfigure(LightBddConfiguration configuration)
    {
        var testAssembly = Assembly.GetAssembly(typeof(ConfiguredLightBddScope))!;

        // Wire up TestTrackingDiagrams report generation into LightBDD's report pipeline
        configuration.ReportWritersConfiguration().CreateStandardReportsWithDiagrams(
            testAssembly,
            new ReportConfigurationOptions
            {
                SpecificationsTitle = "My API Specifications"
            });

        // Optional: Register global setup/teardown for HTTP fakes
        configuration.ExecutionExtensionsConfiguration()
            .RegisterGlobalTearDown("dispose factory", BaseFixture.DisposeFactory)
            .RegisterGlobalSetUp("http fakes", StartHttpFakes, DisposeHttpFakes);
    }

    private void StartHttpFakes() { /* start your HTTP fakes here */ }
    private void DisposeHttpFakes() { /* dispose your HTTP fakes here */ }
}

Key points:

• [assembly: TestPipelineStartup(typeof(ConfiguredLightBddScope))] is required — it tells xUnit v3 to use LightBDD's test pipeline.
• The scope class extends LightBddScope (a class, not an attribute like xUnit v2's LightBddScopeAttribute).
• CreateStandardReportsWithDiagrams hooks into LightBDD's native report pipeline, so reports are generated automatically when the test run ends.

---

Step 4: Create the Base Fixture

Create Infrastructure/BaseFixture.cs. All your test classes will inherit from this:

using LightBDD.XUnit3;
using Microsoft.AspNetCore.Mvc.Testing;
using Microsoft.AspNetCore.TestHost;
using TestTrackingDiagrams.LightBDD.xUnit3;

namespace MyApi.Tests.Component.LightBDD.Infrastructure;

public abstract class BaseFixture : FeatureFixture, IDisposable
{
    private static readonly WebApplicationFactory<Program>? SFactory;
    protected HttpClient Client { get; }

    private const string ServiceUnderTestName = "My API";

    static BaseFixture()
    {
        SFactory = new WebApplicationFactory<Program>().WithWebHostBuilder(builder =>
        {
            builder.ConfigureTestServices(services =>
            {
                services.TrackDependenciesForDiagrams(new LightBddTestTrackingMessageHandlerOptions
                {
                    CallingServiceName = ServiceUnderTestName,
                    PortsToServiceNames =
                    {
                        { 80, ServiceUnderTestName },
                        { 5001, "Downstream Service A" }
                    }
                });
            });
        });
    }

    protected BaseFixture()
    {
        Client = SFactory!.CreateTestTrackingClient(
            new LightBddTestTrackingMessageHandlerOptions
            {
                FixedNameForReceivingService = ServiceUnderTestName
            });
    }

    public void Dispose() => Client.Dispose();
    public static void DisposeFactory() => SFactory?.Dispose();
}

Key points:

• The static constructor creates the WebApplicationFactory once for all tests.
• Each test instance gets its own HttpClient via the instance constructor.
• The test inherits from FeatureFixture (LightBDD's base class for xUnit v3).
• LightBddTestTrackingMessageHandlerOptions automatically resolves the current test context using LightBDD's ScenarioExecutionContext.

---

Step 5: Write a Scenario Feature Class

LightBDD uses partial classes — one file for the scenario definitions, one for the step implementations.

Scenarios/Cake_Feature.cs (scenario definitions):

using LightBDD.Framework.Scenarios;
using LightBDD.XUnit3;

namespace MyApi.Tests.Component.LightBDD.Scenarios;

[FeatureDescription("/cake")]
public partial class Cake_Feature
{
    [HappyPath]
    [Scenario]
    public async Task Calling_Create_Cake_Endpoint_Successfully()
    {
        await Runner.RunScenarioAsync(
            given => A_valid_post_request_for_the_Cake_endpoint(),
            when => The_request_is_sent_to_the_cake_post_endpoint(),
            then => The_response_should_be_successful());
    }

    [Scenario]
    public async Task Calling_Create_Cake_Endpoint_Without_Eggs()
    {
        await Runner.RunScenarioAsync(
            given => A_valid_post_request_for_the_Cake_endpoint(),
            but => The_request_body_is_missing_eggs(),
            when => The_request_is_sent_to_the_cake_post_endpoint(),
            then => The_response_http_status_should_be_bad_request());
    }
}

Scenarios/Cake_Feature.steps.cs (step implementations):

using System.Net;
using System.Net.Http.Json;
using MyApi.Tests.Component.LightBDD.Infrastructure;

namespace MyApi.Tests.Component.LightBDD.Scenarios;

public partial class Cake_Feature : BaseFixture
{
    private HttpResponseMessage? _response;

    private async Task A_valid_post_request_for_the_Cake_endpoint()
    {
        // Set up your request data using Client
    }

    private async Task The_request_body_is_missing_eggs()
    {
        // Modify request
    }

    private async Task The_request_is_sent_to_the_cake_post_endpoint()
    {
        _response = await Client.PostAsJsonAsync("cake", /* your request */);
    }

    private async Task The_response_should_be_successful()
    {
        _response!.StatusCode.Should().Be(HttpStatusCode.OK);
    }

    private async Task The_response_http_status_should_be_bad_request()
    {
        _response!.StatusCode.Should().Be(HttpStatusCode.BadRequest);
    }
}

Key points:

• [FeatureDescription("/cake")] sets the endpoint label in the report (equivalent to @endpoint:/cake in Gherkin).
• [HappyPath] marks a scenario as a happy path (from LightBDD.Contrib.ReportingEnhancements).
• Steps are regular async Task methods — method names are converted to readable text by LightBDD (underscores become spaces).

---

Step 6: Run the Tests

dotnet test

Or, since xUnit v3 assemblies are standalone executables, you can run directly:

bin/Debug/net10.0/MyApi.Tests.Component.LightBDD.exe

After the tests complete, check the bin/Debug/net10.0/Reports/ folder:

File	Description
ComponentSpecificationsWithExamples.html	HTML specifications with embedded PlantUML sequence diagrams
FeaturesReport.html	HTML test run report with diagrams and execution summary
ComponentSpecifications.yml	YAML specifications

---

Using PlantUML Overrides

LightBDD's adapter provides a TrackingDiagramOverride class for customising diagrams within a test:

using TestTrackingDiagrams.LightBDD.xUnit3;

// Insert a delimiter between multiple requests in the diagram
TrackingDiagramOverride.InsertTestDelimiter("Step 1");

// Insert raw PlantUML markup
TrackingDiagramOverride.InsertPlantUml("note over MyApi : Custom note");

// Override the start/end of diagram generation
TrackingDiagramOverride.StartOverride();
TrackingDiagramOverride.EndOverride();

// Explicitly mark the boundary between setup and action phases
TrackingDiagramOverride.StartAction();

Setup separation: When SeparateSetup = true is set on ReportConfigurationOptions, LightBDD automatically detects the boundary between GIVEN steps and WHEN/THEN steps. HTTP calls made during GIVEN steps are wrapped in a visual "Setup" partition in the diagram — no manual StartAction() call is needed.

Tip: InsertTestDelimiter is particularly useful when using LightBDD's Tabular Parameters or TabularAttributes, where a single scenario runs multiple iterations. Insert a delimiter between each iteration to clearly separate them in the diagram.

---

Customisation Options

ReportConfigurationOptions

Passed to CreateStandardReportsWithDiagrams:

Property	Default	Description
SpecificationsTitle	"Specifications"	Title shown at the top of reports
PlantUmlServerBaseUrl	"https://www.plantuml.com/plantuml"	PlantUML server URL
HtmlSpecificationsFileName	"ComponentSpecificationsWithExamples"	Output filename for specs HTML
HtmlTestRunReportFileName	"FeaturesReport"	Output filename for test run HTML
YamlSpecificationsFileName	"ComponentSpecifications"	Output filename for YAML specs
HtmlSpecificationsCustomStyleSheet	null	Custom CSS appended to specs HTML
ExcludedHeaders	[]	HTTP headers to exclude from diagrams
SeparateSetup	false	When true, HTTP calls made during GIVEN steps are wrapped in a visual "Setup" partition in the diagram
HighlightSetup	true	When true (and SeparateSetup is enabled), the setup partition is rendered with a background colour

LightBddTestTrackingMessageHandlerOptions

Property	Description
CallingServiceName	Display name for the service making outgoing HTTP calls
FixedNameForReceivingService	Display name for the service receiving requests (your SUT)
PortsToServiceNames	Dictionary mapping port numbers to friendly service names. Unmapped ports appear as localhost_80, localhost_5001, etc.

---

Faking Downstream Dependencies (Correctly)

When your SUT calls downstream HTTP services, those calls must flow through TestTrackingMessageHandler to produce proper HTTP-style diagram arrows (with method, status code, headers, body). Do not mock service client interfaces and use MessageTracker to manually log HTTP interactions — this produces event-style (blue) arrows that are misleading.

Recommended approaches:

• In-memory fake APIs — WebApplicationFactory instances that serve canned responses (see Example.Api)
• JustEat HttpClient Interception — handler-level interception, chain with TestTrackingMessageHandler
• WireMock.Net — real HTTP server on a random port, map in PortsToServiceNames

See the Tracking Dependencies wiki page for detailed examples of each approach.

---

Differences from xUnit 2

If you're migrating from the TestTrackingDiagrams.LightBDD.xUnit2 package, the key changes are:

Aspect	xUnit 2	xUnit 3
Package	TestTrackingDiagrams.LightBDD.xUnit2	TestTrackingDiagrams.LightBDD.xUnit3
LightBDD package	LightBDD.XUnit2	LightBDD.XUnit3
xUnit package	xunit (v2.x)	xunit.v3
Scope setup	[assembly: ConfiguredLightBddScope] attribute	[assembly: TestPipelineStartup(typeof(ConfiguredLightBddScope))]
Scope base class	LightBddScopeAttribute (attribute)	LightBddScope (class)
Parallelisation	[assembly: ClassCollectionBehavior(AllowTestParallelization = false)]	Not needed (xUnit v3 handles this differently)
Output type	Library (default)	<OutputType>Exe</OutputType> required
Namespace	TestTrackingDiagrams.LightBDD.xUnit2	TestTrackingDiagrams.LightBDD.xUnit3

All other concepts (FeatureFixture, Runner.RunScenarioAsync, CompositeStep, TrackingDiagramOverride, etc.) remain the same.

---

Troubleshooting

Reports are not generated

• Ensure [assembly: TestPipelineStartup(typeof(ConfiguredLightBddScope))] is present at the top of your scope file.
• Ensure CreateStandardReportsWithDiagrams is called in OnConfigure.
• Check that you have <OutputType>Exe</OutputType> in your .csproj — xUnit v3 assemblies must be executable.

Empty specifications HTML / YAML

If any test has failed, the specifications files will be blank by design (they only generate on a fully passing test run). The FeaturesReport.html will still be generated.

ReSharper ignores TestPipelineStartup

Current versions of ReSharper may not recognise [assembly: TestPipelineStartup]. Use the Visual Studio Test Explorer or dotnet test instead.