optee: make sure privileged device can be open only once #4

jforissier · 2016-04-27T10:30:04Z

Prevents two OP-TEE supplicant processes from running simultaneously.

Signed-off-by: Jerome Forissier jerome.forissier@linaro.org

jforissier · 2016-04-27T10:31:30Z

Would it be the proper way of addressing OP-TEE/optee_client#49?

jenswi-linaro · 2016-04-27T10:37:14Z

drivers/tee/optee/optee_private.h

@@ -62,6 +62,7 @@ struct optee_supp {

 struct optee {
 	struct tee_device *supp_teedev;
+	bool supp_cnt;


Please make this unsigned int supp_count

This should probably go into the struct optee_supp above and with supp_mutex for synchronization.

jenswi-linaro · 2016-04-27T10:53:15Z

Sorry, I made a mess of the comments I didn't realize until after a while that synchronization was needed also. Is it clear enough for you to be able to update?

jforissier · 2016-04-27T11:23:09Z

@jenswi-linaro yes I think I got it. Thanks for your suggestions.

jenswi-linaro · 2016-04-27T12:47:19Z

This link looks quite close to what we need: http://www.makelinux.net/ldd3/chp-6-sect-6#chp-6-ITERM-5390

jforissier · 2016-04-27T12:50:53Z

Yeah, more compact than using a mutex. I'll try that.

jforissier · 2016-04-27T13:53:21Z

Updated.

jenswi-linaro · 2016-04-27T14:06:13Z

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>

pascal-brand38 · 2016-04-28T14:12:16Z

I am a bit confused on this patch

having several tee-supplicant on the same device is wrong. But we can have one per TEE that is runninng. So we should at least be able to disable this check
how do we want to handle linux driver update? The goal is to upstream it, but I guess that this patch should not be proposed now, but only once the general driver is upstreamed. Should we have a special comment in the commit line, as it is use to with the **not for mainline**

jforissier · 2016-04-28T14:56:04Z

This "one supplicant" behavior is specific to OP-TEE, i.e., there is nothing in the generic TEE framework that limits the number of users per device. And, since the code in driver/tee/optee does not support multiple TEEs currently [1], there is no use case for disabling the check. Similarly, it would bring nothing more to store the use count in the supplicant device structure (actually it was my first intent to do so but it was not so straightforward). It can be done later, when someone actually tries to run several instances of OP-TEE.

Now about how to handle this patch: I would say it belongs in the patch series for upstream, because it is a fix for the OP-TEE module, more or less. I see no reason for not keeping things together as one patch set. In fact, it may help show that we are indeed using the code, and be an opportunity to keep submitting the driver until it finally gets merged ;) @jenswi-linaro this is your call anyway.

[1] optee_probe() only creates one non-privileged device for the clients and one privileged device for the supplicant

jenswi-linaro · 2016-04-28T17:01:46Z

Yes, I intend to include this in the next patch set. If we had another instance of the optee driver that would also allow one supplicant to connect.

pascal-brand38 · 2016-04-29T07:20:12Z

Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

Prevents two OP-TEE supplicant processes from running simultaneously. Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

jforissier · 2016-04-29T07:33:38Z

Commits squashed and tags added.

commit ac75fe5 upstream. That prevents this bug: [ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at 0000000000000540 [ 2382.270013] IP: [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] PGD 0 [ 2382.270013] Oops: 0002 [linaro-swg#1] SMP [ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops] [ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ linaro-swg#4 [ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012 05/14/2008 [ 2382.270013] task: ffff880039c38000 ti: ffff88003c764000 task.ti: ffff88003c764000 [ 2382.270013] RIP: 0010:[<ffffffffa01fe616>] [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP: 0018:ffff88003c767ea0 EFLAGS: 00010286 [ 2382.270013] RAX: ffff88003c767eb8 RBX: 0000000000000000 RCX: 0000000000006260 [ 2382.270013] RDX: ffffffffa020a060 RSI: ffffffffa0206de1 RDI: ffff88003c767eb0 [ 2382.270013] RBP: ffff88003c767ed8 R08: 0000000000019960 R09: ffffffff811a5412 [ 2382.270013] R10: ffffea0000d7c200 R11: 0000000000000000 R12: ffff88003c767ea8 [ 2382.270013] R13: 00007ffe760617f7 R14: 0000000000000000 R15: 0000557625d7f1e0 [ 2382.270013] FS: 00007f80bb1c0700(0000) GS:ffff88003f400000(0000) knlGS:0000000000000000 [ 2382.270013] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2382.270013] CR2: 0000000000000540 CR3: 000000003c00f000 CR4: 00000000000006f0 [ 2382.270013] Stack: [ 2382.270013] 000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8 [ 2382.270013] ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0 [ 2382.270013] ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c [ 2382.270013] Call Trace: [ 2382.270013] [<ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa] [ 2382.270013] [<ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0 [ 2382.270013] [<ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d [ 2382.270013] RIP [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP <ffff88003c767ea0> [ 2382.270013] CR2: 0000000000000540 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3d5fe03 upstream. We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b linaro-swg#1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 linaro-swg#2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b linaro-swg#3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b linaro-swg#4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ec183d2 upstream. Fixes segmentation fault using, for instance: (gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64 [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410 (gdb) bt #0 0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410 linaro-swg#1 0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:433 linaro-swg#2 0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:498 linaro-swg#3 0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:936 linaro-swg#4 0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391 linaro-swg#5 0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361 linaro-swg#6 0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401 linaro-swg#7 0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253 linaro-swg#8 0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364 linaro-swg#9 0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664 linaro-swg#10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539 linaro-swg#11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264 linaro-swg#12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390 linaro-swg#13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451 linaro-swg#14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495 linaro-swg#15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618 (gdb) Intel PT attempts to find the sched:sched_switch tracepoint but that seg faults if tracefs is not readable, because the error reporting structure is null, as errors are not reported when automatically adding tracepoints. Fix by checking before using. Committer note: This doesn't take place in a kernel that supports perf_event_attr.context_switch, that is the default way that will be used for tracking context switches, only in older kernels, like 4.2, in a machine with Intel PT (e.g. Broadwell) for non-priviledged users. Further info from a similar patch by Wang: The error is in tracepoint_error: it assumes the 'e' parameter is valid. However, there are many situation a parse_event() can be called without parse_events_error. See result of $ grep 'parse_events(.*NULL)' ./tools/perf/ -r' Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Tong Zhang <ztong@vt.edu> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 1965817 ("perf tools: Enhance parsing events tracepoint error output") Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d144dfe upstream. If we use USB ID pin as wakeup source, and there is a USB block device on this USB OTG (ID) cable, the system will be deadlock after system resume. The root cause for this problem is: the workqueue ci_otg may try to remove hcd before the driver resume has finished, and hcd will disconnect the device on it, then, it will call device_release_driver, and holds the device lock "dev->mutex", but it is never unlocked since it waits workqueue writeback to run to flush the block information, but the workqueue writeback is freezable, it is not thawed before driver resume has finished. When the driver (device: sd 0:0:0:0:) resume goes to dpm_complete, it tries to get its device lock "dev->mutex", but it can't get it forever, then the deadlock occurs. Below call stacks show the situation. So, in order to fix this problem, we need to change workqueue ci_otg as freezable, then the work item in this workqueue will be run after driver's resume, this workqueue will not be blocked forever like above case since the workqueue writeback has been thawed too. Tested at: i.mx6qdl-sabresd and i.mx6sx-sdb. [ 555.178869] kworker/u2:13 D c07de74c 0 826 2 0x00000000 [ 555.185310] Workqueue: ci_otg ci_otg_work [ 555.189353] Backtrace: [ 555.191849] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0) [ 555.198912] r10:ee471ba0 r9:00000000 r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 [ 555.206867] r4:ee470000 [ 555.209453] [<c07dec24>] (schedule) from [<c07e2fc4>] (schedule_timeout+0x15c/0x1e0) [ 555.217212] r4:7fffffff r3:edc2b000 [ 555.220862] [<c07e2e68>] (schedule_timeout) from [<c07df6c8>] (wait_for_common+0x94/0x144) [ 555.229140] r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 r4:7fffffff [ 555.235980] [<c07df634>] (wait_for_common) from [<c07df790>] (wait_for_completion+0x18/0x1c) [ 555.244430] r10:00000001 r9:c0b5563c r8:c0042e48 r7:ef086000 r6:eea4372c r5:ef131b00 [ 555.252383] r4:00000000 [ 555.254970] [<c07df778>] (wait_for_completion) from [<c0043cb8>] (flush_work+0x19c/0x234) [ 555.263177] [<c0043b1c>] (flush_work) from [<c0043fac>] (flush_delayed_work+0x48/0x4c) [ 555.271106] r8:ed5b5000 r7:c0b38a3c r6:eea439cc r5:eea4372c r4:eea4372c [ 555.277958] [<c0043f64>] (flush_delayed_work) from [<c00eae18>] (bdi_unregister+0x84/0xec) [ 555.286236] r4:eea43520 r3:20000153 [ 555.289885] [<c00ead94>] (bdi_unregister) from [<c02c2154>] (blk_cleanup_queue+0x180/0x29c) [ 555.298250] r5:eea43808 r4:eea43400 [ 555.301909] [<c02c1fd4>] (blk_cleanup_queue) from [<c0417914>] (__scsi_remove_device+0x48/0xb8) [ 555.310623] r7:00000000 r6:20000153 r5:ededa950 r4:ededa800 [ 555.316403] [<c04178cc>] (__scsi_remove_device) from [<c0415e90>] (scsi_forget_host+0x64/0x68) [ 555.325028] r5:ededa800 r4:ed5b5000 [ 555.328689] [<c0415e2c>] (scsi_forget_host) from [<c0409828>] (scsi_remove_host+0x78/0x104) [ 555.337054] r5:ed5b5068 r4:ed5b5000 [ 555.340709] [<c04097b0>] (scsi_remove_host) from [<c04cdfcc>] (usb_stor_disconnect+0x50/0xb4) [ 555.349247] r6:ed5b56e4 r5:ed5b5818 r4:ed5b5690 r3:00000008 [ 555.355025] [<c04cdf7c>] (usb_stor_disconnect) from [<c04b3bc8>] (usb_unbind_interface+0x78/0x25c) [ 555.363997] r8:c13919b4 r7:edd3c000 r6:edd3c020 r5:ee551c68 r4:ee551c00 r3:c04cdf7c [ 555.371892] [<c04b3b50>] (usb_unbind_interface) from [<c03dc248>] (__device_release_driver+0x8c/0x118) [ 555.381213] r10:00000001 r9:edd90c00 r8:c13919b4 r7:ee551c68 r6:c0b546e0 r5:c0b5563c [ 555.389167] r4:edd3c020 [ 555.391752] [<c03dc1bc>] (__device_release_driver) from [<c03dc2fc>] (device_release_driver+0x28/0x34) [ 555.401071] r5:edd3c020 r4:edd3c054 [ 555.404721] [<c03dc2d4>] (device_release_driver) from [<c03db304>] (bus_remove_device+0xe0/0x110) [ 555.413607] r5:edd3c020 r4:ef17f04c [ 555.417253] [<c03db224>] (bus_remove_device) from [<c03d8128>] (device_del+0x114/0x21c) [ 555.425270] r6:edd3c028 r5:edd3c020 r4:ee551c00 r3:00000000 [ 555.431045] [<c03d8014>] (device_del) from [<c04b1560>] (usb_disable_device+0xa4/0x1e8) [ 555.439061] r8:edd3c000 r7:eded8000 r6:00000000 r5:00000001 r4:ee551c00 [ 555.445906] [<c04b14bc>] (usb_disable_device) from [<c04a8e54>] (usb_disconnect+0x74/0x224) [ 555.454271] r9:edd90c00 r8:ee551000 r7:ee551c68 r6:ee551c9c r5:ee551c00 r4:00000001 [ 555.462156] [<c04a8de0>] (usb_disconnect) from [<c04a8fb8>] (usb_disconnect+0x1d8/0x224) [ 555.470259] r10:00000001 r9:edd90000 r8:ee471e2c r7:ee551468 r6:ee55149c r5:ee551400 [ 555.478213] r4:00000001 [ 555.480797] [<c04a8de0>] (usb_disconnect) from [<c04ae5ec>] (usb_remove_hcd+0xa0/0x1ac) [ 555.488813] r10:00000001 r9:ee471eb0 r8:00000000 r7:ef3d9500 r6:eded810c r5:eded80b0 [ 555.496765] r4:eded8000 [ 555.499351] [<c04ae54c>] (usb_remove_hcd) from [<c04d4158>] (host_stop+0x28/0x64) [ 555.506847] r6:eeb50010 r5:eded8000 r4:eeb51010 [ 555.511563] [<c04d4130>] (host_stop) from [<c04d09b8>] (ci_otg_work+0xc4/0x124) [ 555.518885] r6:00000001 r5:eeb50010 r4:eeb502a0 r3:c04d4130 [ 555.524665] [<c04d08f4>] (ci_otg_work) from [<c00454f0>] (process_one_work+0x194/0x420) [ 555.532682] r6:ef086000 r5:eeb502a0 r4:edc44480 [ 555.537393] [<c004535c>] (process_one_work) from [<c00457b0>] (worker_thread+0x34/0x514) [ 555.545496] r10:edc44480 r9:ef086000 r8:c0b1a100 r7:ef086034 r6:00000088 r5:edc44498 [ 555.553450] r4:ef086000 [ 555.556032] [<c004577c>] (worker_thread) from [<c004bab4>] (kthread+0xdc/0xf8) [ 555.563268] r10:00000000 r9:00000000 r8:00000000 r7:c004577c r6:edc44480 r5:eddc15c0 [ 555.571221] r4:00000000 [ 555.573804] [<c004b9d8>] (kthread) from [<c000fef0>] (ret_from_fork+0x14/0x24) [ 555.581040] r7:00000000 r6:00000000 r5:c004b9d8 r4:eddc15c0 [ 553.429383] sh D c07de74c 0 694 691 0x00000000 [ 553.435801] Backtrace: [ 553.438295] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0) [ 553.445358] r10:edd3c054 r9:edd3c078 r8:edddbd50 r7:edcbbc00 r6:c1377c34 r5:60000153 [ 553.453313] r4:eddda000 [ 553.455896] [<c07dec24>] (schedule) from [<c07deff8>] (schedule_preempt_disabled+0x10/0x14) [ 553.464261] r4:edd3c058 r3:0000000a [ 553.467910] [<c07defe8>] (schedule_preempt_disabled) from [<c07e0bbc>] (mutex_lock_nested+0x1a0/0x3e8) [ 553.477254] [<c07e0a1c>] (mutex_lock_nested) from [<c03e927c>] (dpm_complete+0xc0/0x1b0) [ 553.485358] r10:00561408 r9:edd3c054 r8:c0b4863c r7:edddbd90 r6:c0b485d8 r5:edd3c020 [ 553.493313] r4:edd3c0d0 [ 553.495896] [<c03e91bc>] (dpm_complete) from [<c03e9388>] (dpm_resume_end+0x1c/0x20) [ 553.503652] r9:00000000 r8:c0b1a9d0 r7:c1334ec0 r6:c1334edc r5:00000003 r4:00000010 [ 553.511544] [<c03e936c>] (dpm_resume_end) from [<c0079894>] (suspend_devices_and_enter+0x158/0x504) [ 553.520604] r4:00000000 r3:c1334efc [ 553.524250] [<c007973c>] (suspend_devices_and_enter) from [<c0079e74>] (pm_suspend+0x234/0x2cc) [ 553.532961] r10:00561408 r9:ed6b7300 r8:00000004 r7:c1334eec r6:00000000 r5:c1334ee8 [ 553.540914] r4:00000003 [ 553.543493] [<c0079c40>] (pm_suspend) from [<c0078a6c>] (state_store+0x6c/0xc0) [ 555.703684] 7 locks held by kworker/u2:13/826: [ 555.708140] #0: ("%s""ci_otg"){++++.+}, at: [<c0045484>] process_one_work+0x128/0x420 [ 555.716277] linaro-swg#1: ((&ci->work)){+.+.+.}, at: [<c0045484>] process_one_work+0x128/0x420 [ 555.724317] linaro-swg#2: (usb_bus_list_lock){+.+.+.}, at: [<c04ae5e4>] usb_remove_hcd+0x98/0x1ac [ 555.732626] linaro-swg#3: (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224 [ 555.740403] linaro-swg#4: (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224 [ 555.748179] linaro-swg#5: (&dev->mutex){......}, at: [<c03dc2f4>] device_release_driver+0x20/0x34 [ 555.756487] linaro-swg#6: (&shost->scan_mutex){+.+.+.}, at: [<c04097d0>] scsi_remove_host+0x20/0x104 Cc: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1c3c909 broke PAE40. Macro pfn_pte(pfn, prot) creates paddr from pfn, but the page shift was getting truncated to 32 bits since we lost the proper cast to 64 bits (for PAE400 Instead of reverting that commit, use a better helper which is 32/64 bits safe just like ARM implementation. Fixes: 1c3c909 ("ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS") Cc: <stable@vger.kernel.org> linaro-swg#4.4+ Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> [vgupta: massaged changelog] Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

The spinlock used by boost_groups in sched tune must be initialized. This commit fixes this lack and the following errors: [ 0.384739] c2 BUG: spinlock bad magic on CPU#2, swapper/2/0 [ 0.390313] c2 lock: 0xffffffc15fe1fc80, .magic:00000000, .owner: <none>/-1, .owner_cpu: 0 [ 0.398739] c2 CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.4.6+ #4 [ 0.404816] c2 Hardware name: Spreadtrum SP9860gBoard (DT) [ 0.410462] c2 Call trace: [ 0.413159] c2 [<ffffff800808b50c>] dump_backtrace+0x0/0x210 [ 0.418803] c2 [<ffffff800808b73c>] show_stack+0x20/0x28 [ 0.424100] c2 [<ffffff8008433310>] dump_stack+0xa8/0xe0 [ 0.429398] c2 [<ffffff8008139398>] spin_dump+0x78/0x9c [ 0.434608] c2 [<ffffff80081393ec>] spin_bug+0x30/0x3c [ 0.439644] c2 [<ffffff80081394e4>] do_raw_spin_lock+0xac/0x1b4 [ 0.445639] c2 [<ffffff8008abffe4>] _raw_spin_lock_irqsave+0x58/0x68 [ 0.451977] c2 [<ffffff800812a560>] schedtune_enqueue_task+0x84/0x3bc [ 0.458320] c2 [<ffffff8008111678>] enqueue_task_fair+0x438/0x208c [ 0.464487] c2 [<ffffff80080feeec>] activate_task+0x70/0xd0 [ 0.470130] c2 [<ffffff80080ff4a4>] ttwu_do_activate.constprop.131+0x4c/0x98 [ 0.477079] c2 [<ffffff80081005d0>] try_to_wake_up+0x254/0x54c [ 0.482899] c2 [<ffffff80081009d4>] default_wake_function+0x30/0x3c [ 0.489154] c2 [<ffffff8008122464>] autoremove_wake_function+0x3c/0x6c [ 0.495754] c2 [<ffffff8008121b70>] __wake_up_common+0x64/0xa4 [ 0.501574] c2 [<ffffff8008121e9c>] __wake_up+0x48/0x60 [ 0.506788] c2 [<ffffff8008150fac>] rcu_gp_kthread_wake+0x50/0x5c [ 0.512866] c2 [<ffffff8008151fec>] note_gp_changes+0xac/0xd4 [ 0.518597] c2 [<ffffff8008153044>] rcu_process_callbacks+0xe8/0x93c [ 0.524940] c2 [<ffffff80080d0b84>] __do_softirq+0x24c/0x5b8 [ 0.530584] c2 [<ffffff80080d1284>] irq_exit+0xc0/0xec [ 0.535623] c2 [<ffffff8008144208>] __handle_domain_irq+0x94/0xf8 [ 0.541789] c2 [<ffffff8008082554>] gic_handle_irq+0x64/0xc0 Signed-off-by: Ke Wang <ke.wang@spreadtrum.com> Signed-off-by: Andres Oportus <andresoportus@google.com>

commit cdea465 upstream. A vendor with a system having more than 128 CPUs occasionally encounters the following crash during shutdown. This is not an easily reproduceable event, but the vendor was able to provide the following analysis of the crash, which exhibits the same footprint each time. crash> bt PID: 0 TASK: ffff88017c70ce70 CPU: 5 COMMAND: "swapper/5" #0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b #1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2 #2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0 linaro-swg#3 [ffff88085c143c10] oops_end at ffffffff8168ef88 linaro-swg#4 [ffff88085c143c38] no_context at ffffffff8167ebb3 linaro-swg#5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49 linaro-swg#6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3 linaro-swg#7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e linaro-swg#8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5 linaro-swg#9 [ffff88085c143d70] page_fault at ffffffff8168e188 [exception RIP: unknown or invalid address] RIP: ffffffffa053c800 RSP: ffff88085c143e28 RFLAGS: 00010206 RAX: ffff88017c72bfd8 RBX: ffff88017a8dc000 RCX: ffff8810588b5ac8 RDX: ffff8810588b5a00 RSI: ffffffffa053c800 RDI: ffff8810588b5a00 RBP: ffff88085c143e58 R8: ffff88017c70d408 R9: ffff88017a8dc000 R10: 0000000000000002 R11: ffff88085c143da0 R12: ffff8810588b5ac8 R13: 0000000000000100 R14: ffffffffa053c800 R15: ffff8810588b5a00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <IRQ stack> [exception RIP: cpuidle_enter_state+82] RIP: ffffffff81514192 RSP: ffff88017c72be50 RFLAGS: 00000202 RAX: 0000001e4c3c6f16 RBX: 000000000000f8a0 RCX: 0000000000000018 RDX: 0000000225c17d03 RSI: ffff88017c72bfd8 RDI: 0000001e4c3c6f16 RBP: ffff88017c72be78 R8: 000000000000237e R9: 0000000000000018 R10: 0000000000002494 R11: 0000000000000001 R12: ffff88017c72be20 R13: ffff88085c14f8e0 R14: 0000000000000082 R15: 0000001e4c3bb400 ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018 This is the corresponding stack trace It has crashed because the area pointed with RIP extracted from timer element is already removed during a shutdown process. The function is smi_timeout(). And we think ffff8810588b5a00 in RDX is a parameter struct smi_info crash> rd ffff8810588b5a00 20 ffff8810588b5a00: ffff8810588b6000 0000000000000000 .`.X............ ffff8810588b5a10: ffff880853264400 ffffffffa05417e0 .D&S......T..... ffff8810588b5a20: 24a024a000000000 0000000000000000 .....$.$........ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a40: ffffffffa053a040 ffffffffa053a060 @.S.....`.S..... ffff8810588b5a50: 0000000000000000 0000000100000001 ................ ffff8810588b5a60: 0000000000000000 0000000000000e00 ................ ffff8810588b5a70: ffffffffa053a580 ffffffffa053a6e0 ..S.......S..... ffff8810588b5a80: ffffffffa053a4a0 ffffffffa053a250 ..S.....P.S..... ffff8810588b5a90: 0000000500000002 0000000000000000 ................ Unfortunately the top of this area is already detroyed by someone. But because of two reasonns we think this is struct smi_info 1) The address included in between ffff8810588b5a70 and ffff8810588b5a80: are inside of ipmi_si_intf.c see crash> module ffff88085779d2c0 2) We've found the area which point this. It is offset 0x68 of ffff880859df4000 crash> rd ffff880859df4000 100 ffff880859df4000: 0000000000000000 0000000000000001 ................ ffff880859df4010: ffffffffa0535290 dead000000000200 .RS............. ffff880859df4020: ffff880859df4020 ffff880859df4020 @.Y.... @.Y.... ffff880859df4030: 0000000000000002 0000000000100010 ................ ffff880859df4040: ffff880859df4040 ffff880859df4040 @@.Y....@@.Y.... ffff880859df4050: 0000000000000000 0000000000000000 ................ ffff880859df4060: 0000000000000000 ffff8810588b5a00 .........Z.X.... ffff880859df4070: 0000000000000001 ffff880859df4078 ........x@.Y.... If we regards it as struct ipmi_smi in shutdown process it looks consistent. The remedy for this apparent race is affixed below. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> This was first introduced in 7ea0ed2 ipmi: Make the message handler easier to use for SMI interfaces where some code was moved outside of the rcu_read_lock() and the lock was not added. Signed-off-by: Corey Minyard <cminyard@mvista.com>

… crash commit 96b7774 upstream. Commit: 2f5177f ("sched/cgroup: Fix/cleanup cgroup teardown/init") .. moved sched_online_group() from css_online() to css_alloc(). It exposes half-baked task group into global lists before initializing generic cgroup stuff. LTP testcase (third in cgroup_regression_test) written for testing similar race in kernels 2.6.26-2.6.28 easily triggers this oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: kernfs_path_from_node_locked+0x260/0x320 CPU: 1 PID: 30346 Comm: cat Not tainted 4.10.0-rc5-test linaro-swg#4 Call Trace: ? kernfs_path_from_node+0x4f/0x60 kernfs_path_from_node+0x3e/0x60 print_rt_rq+0x44/0x2b0 print_rt_stats+0x7a/0xd0 print_cpu+0x2fc/0xe80 ? __might_sleep+0x4a/0x80 sched_debug_show+0x17/0x30 seq_read+0xf2/0x3b0 proc_reg_read+0x42/0x70 __vfs_read+0x28/0x130 ? security_file_permission+0x9b/0xc0 ? rw_verify_area+0x4e/0xb0 vfs_read+0xa5/0x170 SyS_read+0x46/0xa0 entry_SYSCALL_64_fastpath+0x1e/0xad Here the task group is already linked into the global RCU-protected 'task_groups' list, but the css->cgroup pointer is still NULL. This patch reverts this chunk and moves online back to css_online(). Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2f5177f ("sched/cgroup: Fix/cleanup cgroup teardown/init") Link: http://lkml.kernel.org/r/148655324740.424917.5302984537258726349.stgit@buzz Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 89affbf upstream. In codepaths that use the begin/retry interface for reading mems_allowed_seq with irqs disabled, there exists a race condition that stalls the patch process after only modifying a subset of the static_branch call sites. This problem manifested itself as a deadlock in the slub allocator, inside get_any_partial. The loop reads mems_allowed_seq value (via read_mems_allowed_begin), performs the defrag operation, and then verifies the consistency of mem_allowed via the read_mems_allowed_retry and the cookie returned by xxx_begin. The issue here is that both begin and retry first check if cpusets are enabled via cpusets_enabled() static branch. This branch can be rewritted dynamically (via cpuset_inc) if a new cpuset is created. The x86 jump label code fully synchronizes across all CPUs for every entry it rewrites. If it rewrites only one of the callsites (specifically the one in read_mems_allowed_retry) and then waits for the smp_call_function(do_sync_core) to complete while a CPU is inside the begin/retry section with IRQs off and the mems_allowed value is changed, we can hang. This is because begin() will always return 0 (since it wasn't patched yet) while retry() will test the 0 against the actual value of the seq counter. The fix is to use two different static keys: one for begin (pre_enable_key) and one for retry (enable_key). In cpuset_inc(), we first bump the pre_enable key to ensure that cpuset_mems_allowed_begin() always return a valid seqcount if are enabling cpusets. Similarly, when disabling cpusets via cpuset_dec(), we first ensure that callers of cpuset_mems_allowed_retry() will start ignoring the seqcount value before we let cpuset_mems_allowed_begin() return 0. The relevant stack traces of the two stuck threads: CPU: 1 PID: 1415 Comm: mkdir Tainted: G L 4.9.36-00104-g540c51286237 linaro-swg#4 Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017 task: ffff8817f9c28000 task.stack: ffffc9000ffa4000 RIP: smp_call_function_many+0x1f9/0x260 Call Trace: smp_call_function+0x3b/0x70 on_each_cpu+0x2f/0x90 text_poke_bp+0x87/0xd0 arch_jump_label_transform+0x93/0x100 __jump_label_update+0x77/0x90 jump_label_update+0xaa/0xc0 static_key_slow_inc+0x9e/0xb0 cpuset_css_online+0x70/0x2e0 online_css+0x2c/0xa0 cgroup_apply_control_enable+0x27f/0x3d0 cgroup_mkdir+0x2b7/0x420 kernfs_iop_mkdir+0x5a/0x80 vfs_mkdir+0xf6/0x1a0 SyS_mkdir+0xb7/0xe0 entry_SYSCALL_64_fastpath+0x18/0xad ... CPU: 2 PID: 1 Comm: init Tainted: G L 4.9.36-00104-g540c51286237 linaro-swg#4 Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017 task: ffff8818087c0000 task.stack: ffffc90000030000 RIP: int3+0x39/0x70 Call Trace: <#DB> ? ___slab_alloc+0x28b/0x5a0 <EOE> ? copy_process.part.40+0xf7/0x1de0 __slab_alloc.isra.80+0x54/0x90 copy_process.part.40+0xf7/0x1de0 copy_process.part.40+0xf7/0x1de0 kmem_cache_alloc_node+0x8a/0x280 copy_process.part.40+0xf7/0x1de0 _do_fork+0xe7/0x6c0 _raw_spin_unlock_irq+0x2d/0x60 trace_hardirqs_on_caller+0x136/0x1d0 entry_SYSCALL_64_fastpath+0x5/0xad do_syscall_64+0x27/0x350 SyS_clone+0x19/0x20 do_syscall_64+0x60/0x350 entry_SYSCALL64_slow_path+0x25/0x25 Link: http://lkml.kernel.org/r/20170731040113.14197-1-dmitriyz@waymo.com Fixes: 46e700a ("mm, page_alloc: remove unnecessary taking of a seqlock when cpusets are disabled") Signed-off-by: Dima Zavin <dmitriyz@waymo.com> Reported-by: Cliff Spradlin <cspradlin@waymo.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christopher Lameter <cl@linux.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There's a race between usb_gadget_udc_stop() which is likely to set the gadget driver to NULL in the udc driver and this drivers gadget disconnect fn which likely checks for the gadget driver to a null ptr. It happens that unbind (doing set_gadget_data(NULL)) is called before the gadget driver is set to NULL and the udc driver calls disconnect fn which results in cdev being a null ptr. As a workaround we check cdev in android_disconnect() to prevent the following panic: Unable to handle kernel NULL pointer dereference at virtual address 000000a8 pgd = ffffff800940a000 [000000a8] *pgd=00000000be1fe003, *pud=00000000be1fe003, *pmd=0000000000000000 Internal error: Oops: 96000046 [#1] PREEMPT SMP CPU: 7 PID: 1134 Comm: kworker/u16:3 Tainted: G S 4.9.41-g75cd2a0231ea-dirty #4 Hardware name: HiKey960 (DT) Workqueue: events_power_efficient event_work task: ffffffc0b5f4f000 task.stack: ffffffc0b5b94000 PC is at android_disconnect+0x54/0xa4 LR is at android_disconnect+0x54/0xa4 pc : [<ffffff8008855938>] lr : [<ffffff8008855938>] pstate: 80000185 sp : ffffffc0b5b97bf0 x29: ffffffc0b5b97bf0 x28: 0000000000000003 x27: ffffffc0b5181c54 x26: ffffffc0b5181c68 x25: ffffff8008dc1000 x24: ffffffc0b5181d70 x23: ffffff8008dc18a0 x22: ffffffc0b5f5a018 x21: ffffffc0b5894ad8 x20: 0000000000000000 x19: ffffff8008ddaec8 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 00000000007c9ccd x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffff800930f1a8 x8 : ffffff800932a133 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffffc0b5b97a50 x4 : ffffffc0be19f090 x3 : 0000000000000000 x2 : ffffff80091ca000 x1 : 000000000000002f x0 : 000000000000002f This happened on a hikey960 with the following backtrace: [<ffffff8008855938>] android_disconnect+0x54/0xa4 [<ffffff80089def38>] dwc3_disconnect_gadget.part.19+0x114.888119] [<ffffff80087f7d48>] dwc3_gadget_suspend+0x6c/0x70 [<ffffff80087ee674>] dwc3_suspend_device+0x58/0xa0 [<ffffff80087fb418>] dwc3_otg_work+0x214/0x474 [<ffffff80087fdc74>] event_work+0x3bc/0x5ac [<ffffff80080e5d88>] process_one_work+0x14c/0x43c [<ffffff80080e60d4>] worker_thread+0x5c/0x438 [<ffffff80080ece68>] kthread+0xec/0x100 [<ffffff8008083680>] ret_from_fork+0x10/0x50 dwc3_otg_work tries to handle a switch from host to device mode and therefore calls disconnect on the gadget driver. To reproduce the issue it is enaugh to enable tethering (rndis gadget), unplug and plug in again the usb connector which causes the change from device to host and back to device mode. Signed-off-by: Danilo Krummrich <danilokrummrich@gmail.com>

commit 2546da9 upstream. The RX SGL in processing is already registered with the RX SGL tracking list to support proper cleanup. The cleanup code path uses the sg_num_bytes variable which must therefore be always initialized, even in the error code path. Signed-off-by: Stephan Mueller <smueller@chronox.de> Reported-by: syzbot+9c251bdd09f83b92ba95@syzkaller.appspotmail.com #syz test: https://github.com/google/kmsan.git master CC: <stable@vger.kernel.org> #4.14 Fixes: e870456 ("crypto: algif_skcipher - overhaul memory management") Fixes: d887c52 ("crypto: algif_aead - overhaul memory management") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 147b27e upstream. It may cause race by setting 'nvmeq' in nvme_init_request() because .init_request is called inside switching io scheduler, which may happen when the NVMe device is being resetted and its nvme queues are being freed and created. We don't have any sync between the two pathes. This patch changes the nvmeq allocation to occur at probe time so there is no way we can dereference it at init_request. [ 93.268391] kernel BUG at drivers/nvme/host/pci.c:408! [ 93.274146] invalid opcode: 0000 [#1] SMP [ 93.278618] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc ipmi_ssif vfat fat intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel iTCO_wdt intel_cstate ipmi_si iTCO_vendor_support intel_uncore mxm_wmi mei_me ipmi_devintf intel_rapl_perf pcspkr sg ipmi_msghandler lpc_ich dcdbas mei shpchp acpi_power_meter wmi dm_multipath ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci nvme libata crc32c_intel nvme_core tg3 megaraid_sas ptp i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod [ 93.349071] CPU: 5 PID: 1842 Comm: sh Not tainted 4.15.0-rc2.ming+ #4 [ 93.356256] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017 [ 93.364801] task: 00000000fb8abf2a task.stack: 0000000028bd82d1 [ 93.371408] RIP: 0010:nvme_init_request+0x36/0x40 [nvme] [ 93.377333] RSP: 0018:ffffc90002537ca8 EFLAGS: 00010246 [ 93.383161] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000008 [ 93.391122] RDX: 0000000000000000 RSI: ffff880276ae0000 RDI: ffff88047bae9008 [ 93.399084] RBP: ffff88047bae9008 R08: ffff88047bae9008 R09: 0000000009dabc00 [ 93.407045] R10: 0000000000000004 R11: 000000000000299c R12: ffff880186bc1f00 [ 93.415007] R13: ffff880276ae0000 R14: 0000000000000000 R15: 0000000000000071 [ 93.422969] FS: 00007f33cf288740(0000) GS:ffff88047ba80000(0000) knlGS:0000000000000000 [ 93.431996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 93.438407] CR2: 00007f33cf28e000 CR3: 000000047e5bb006 CR4: 00000000001606e0 [ 93.446368] Call Trace: [ 93.449103] blk_mq_alloc_rqs+0x231/0x2a0 [ 93.453579] blk_mq_sched_alloc_tags.isra.8+0x42/0x80 [ 93.459214] blk_mq_init_sched+0x7e/0x140 [ 93.463687] elevator_switch+0x5a/0x1f0 [ 93.467966] ? elevator_get.isra.17+0x52/0xc0 [ 93.472826] elv_iosched_store+0xde/0x150 [ 93.477299] queue_attr_store+0x4e/0x90 [ 93.481580] kernfs_fop_write+0xfa/0x180 [ 93.485958] __vfs_write+0x33/0x170 [ 93.489851] ? __inode_security_revalidate+0x4c/0x60 [ 93.495390] ? selinux_file_permission+0xda/0x130 [ 93.500641] ? _cond_resched+0x15/0x30 [ 93.504815] vfs_write+0xad/0x1a0 [ 93.508512] SyS_write+0x52/0xc0 [ 93.512113] do_syscall_64+0x61/0x1a0 [ 93.516199] entry_SYSCALL64_slow_path+0x25/0x25 [ 93.521351] RIP: 0033:0x7f33ce96aab0 [ 93.525337] RSP: 002b:00007ffe57570238 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 93.533785] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f33ce96aab0 [ 93.541746] RDX: 0000000000000006 RSI: 00007f33cf28e000 RDI: 0000000000000001 [ 93.549707] RBP: 00007f33cf28e000 R08: 000000000000000a R09: 00007f33cf288740 [ 93.557669] R10: 00007f33cf288740 R11: 0000000000000246 R12: 00007f33cec42400 [ 93.565630] R13: 0000000000000006 R14: 0000000000000001 R15: 0000000000000000 [ 93.573592] Code: 4c 8d 40 08 4c 39 c7 74 16 48 8b 00 48 8b 04 08 48 85 c0 74 16 48 89 86 78 01 00 00 31 c0 c3 8d 4a 01 48 63 c9 48 c1 e1 03 eb de <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 85 f6 53 48 89 [ 93.594676] RIP: nvme_init_request+0x36/0x40 [nvme] RSP: ffffc90002537ca8 [ 93.602273] ---[ end trace 810dde3993e5f14e ]--- Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9952509 upstream. Avoid that KASAN reports the following: BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt] Read of size 4 at addr ffff880151180cb8 by task check/4681 CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_close_ch+0x4f/0x1b0 [ib_srpt] srpt_set_enabled+0xf7/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: aaf45bd ("IB/srpt: Detect session shutdown reliably") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <tycho@tycho.ws> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3943b04 upstream. The writeback thread would exit with a lock held when the cache device is detached via sysfs interface, fix it by releasing the held lock before exiting the while-loop. Fixes: fadd94e (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set) Signed-off-by: Shan Hai <shan.hai@oracle.com> Signed-off-by: Coly Li <colyli@suse.de> Tested-by: Shenghui Wang <shhuiw@foxmail.com> Cc: stable@vger.kernel.org #4.17+ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 2059e52. This commit causes reboot to fail on imx6 wandboard, so let's revert it. Cc: <stable@vger.kernel.org> #4.14 Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c77ec61 ] This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 46b3722 ] We occasionaly hit following assert failure in 'perf top', when processing the /proc info in multiple threads. perf: ...include/linux/refcount.h:109: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed. The gdb backtrace looks like this: [Switching to Thread 0x7ffff11ba700 (LWP 13749)] 0x00007ffff50839fb in raise () from /lib64/libc.so.6 (gdb) #0 0x00007ffff50839fb in raise () from /lib64/libc.so.6 #1 0x00007ffff5085800 in abort () from /lib64/libc.so.6 #2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6 #3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6 #4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0) at ...include/linux/refcount.h:109 #5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0) at util/comm.c:24 #6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:72 #7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:95 #8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2", timestamp=0, exec=false) at util/comm.c:111 #9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57 #10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38, threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457 #11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38, ... The failing assertion is this one: REFCOUNT_WARN(!refcount_inc_not_zero(r), ... The problem is that we keep global comm_str_root list, which is accessed by multiple threads during the 'perf top' startup and following 2 paths can race: thread 1: ... thread__new comm__new comm_str__findnew down_write(&comm_str_lock); __comm_str__findnew comm_str__get thread 2: ... comm__override or comm__free comm_str__put refcount_dec_and_test down_write(&comm_str_lock); rb_erase(&cs->rb_node, &comm_str_root); Because thread 2 first decrements the refcnt and only after then it removes the struct comm_str from the list, the thread 1 can find this object on the list with refcnt equls to 0 and hit the assert. This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects that already dropped the refcnt to 0. For the rest of the objects we take the refcnt before comparing its name and release it afterwards with comm_str__put, which can also release the object completely. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Lukasz Odzioba <lukasz.odzioba@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8edfe2e upstream. Commit 822fb18 ("xen-netfront: wait xenbus state change when load module manually") added a new wait queue to wait on for a state change when the module is loaded manually. Unfortunately there is no wakeup anywhere to stop that waiting. Instead of introducing a new wait queue rename the existing module_unload_q to module_wq and use it for both purposes (loading and unloading). As any state change of the backend might be intended to stop waiting do the wake_up_all() in any case when netback_changed() is called. Fixes: 822fb18 ("xen-netfront: wait xenbus state change when load module manually") Cc: <stable@vger.kernel.org> #4.18 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b71c69c ] Fixes this warning that was provoked by a pairing: [60258.016221] WARNING: possible recursive locking detected [60258.021558] 4.15.0-RD1812-BSP #1 Tainted: G O [60258.027146] -------------------------------------------- [60258.032464] kworker/u5:0/70 is trying to acquire lock: [60258.037609] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<87759073>] bt_accept_enqueue+0x3c/0x74 [60258.046863] [60258.046863] but task is already holding lock: [60258.052704] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.062905] [60258.062905] other info that might help us debug this: [60258.069441] Possible unsafe locking scenario: [60258.069441] [60258.075368] CPU0 [60258.077821] ---- [60258.080272] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.085510] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.090748] [60258.090748] *** DEADLOCK *** [60258.090748] [60258.096676] May be due to missing lock nesting notation [60258.096676] [60258.103472] 5 locks held by kworker/u5:0/70: [60258.107747] #0: ((wq_completion)%shdev->name#2){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.117263] #1: ((work_completion)(&hdev->rx_work)){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.126942] #2: (&conn->chan_lock){+.+.}, at: [<7877c8c3>] l2cap_connect+0x80/0x4f8 [60258.134806] #3: (&chan->lock/2){+.+.}, at: [<2e16c724>] l2cap_connect+0x8c/0x4f8 [60258.142410] #4: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.153043] [60258.153043] stack backtrace: [60258.157413] CPU: 1 PID: 70 Comm: kworker/u5:0 Tainted: G O 4.15.0-RD1812-BSP #1 [60258.165945] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [60258.172485] Workqueue: hci0 hci_rx_work [60258.176331] Backtrace: [60258.178797] [<8010c9fc>] (dump_backtrace) from [<8010ccbc>] (show_stack+0x18/0x1c) [60258.186379] r7:80e55fe4 r6:80e55fe4 r5:20050093 r4:00000000 [60258.192058] [<8010cca4>] (show_stack) from [<809864e8>] (dump_stack+0xb0/0xdc) [60258.199301] [<80986438>] (dump_stack) from [<8016ecc8>] (__lock_acquire+0xffc/0x11d4) [60258.207144] r9:5e2bb019 r8:630f974c r7:ba8a5940 r6:ba8a5ed8 r5:815b5220 r4:80fa081c [60258.214901] [<8016dccc>] (__lock_acquire) from [<8016f620>] (lock_acquire+0x78/0x98) [60258.222655] r10:00000040 r9:00000040 r8:808729f0 r7:00000001 r6:00000000 r5:60050013 [60258.230491] r4:00000000 [60258.233045] [<8016f5a8>] (lock_acquire) from [<806ee974>] (lock_sock_nested+0x64/0x88) [60258.240970] r7:00000000 r6:b796e870 r5:00000001 r4:b796e800 [60258.246643] [<806ee910>] (lock_sock_nested) from [<808729f0>] (bt_accept_enqueue+0x3c/0x74) [60258.255004] r8:00000001 r7:ba7d3c00 r6:ba7d3ea4 r5:ba7d2000 r4:b796e800 [60258.261717] [<808729b4>] (bt_accept_enqueue) from [<808aa39c>] (l2cap_sock_new_connection_cb+0x68/0x88) [60258.271117] r5:b796e800 r4:ba7d2000 [60258.274708] [<808aa334>] (l2cap_sock_new_connection_cb) from [<808a294c>] (l2cap_connect+0x190/0x4f8) [60258.283933] r5:00000001 r4:ba6dce00 [60258.287524] [<808a27bc>] (l2cap_connect) from [<808a4a14>] (l2cap_recv_frame+0x744/0x2cf8) [60258.295800] r10:ba6dcf24 r9:00000004 r8:b78d8014 r7:00000004 r6:bb05d000 r5:00000004 [60258.303635] r4:bb05d008 [60258.306183] [<808a42d0>] (l2cap_recv_frame) from [<808a7808>] (l2cap_recv_acldata+0x210/0x214) [60258.314805] r10:b78e7800 r9:bb05d960 r8:00000001 r7:bb05d000 r6:0000000c r5:b7957a80 [60258.322641] r4:ba6dce00 [60258.325188] [<808a75f8>] (l2cap_recv_acldata) from [<8087630c>] (hci_rx_work+0x35c/0x4e8) [60258.333374] r6:80e5743c r5:bb05d7c8 r4:b7957a80 [60258.338004] [<80875fb0>] (hci_rx_work) from [<8013dc7c>] (process_one_work+0x1a4/0x4fc) [60258.346018] r10:00000001 r9:00000000 r8:baabfef8 r7:ba997500 r6:baaba800 r5:baaa5d00 [60258.353853] r4:bb05d7c8 [60258.356401] [<8013dad8>] (process_one_work) from [<8013e028>] (worker_thread+0x54/0x5cc) [60258.364503] r10:baabe038 r9:baaba834 r8:80e05900 r7:00000088 r6:baaa5d18 r5:baaba800 [60258.372338] r4:baaa5d00 [60258.374888] [<8013dfd4>] (worker_thread) from [<801448f8>] (kthread+0x134/0x160) [60258.382295] r10:ba8310b8 r9:bb07dbfc r8:8013dfd4 r7:baaa5d00 r6:00000000 r5:baaa8ac0 [60258.390130] r4:ba831080 [60258.392682] [<801447c4>] (kthread) from [<801080b4>] (ret_from_fork+0x14/0x20) [60258.399915] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801447c4 [60258.407751] r4:baaa8ac0 r3:baabe000 Signed-off-by: Philipp Puschmann <pp@emlix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As Wen Xu reported in below link: https://bugzilla.kernel.org/show_bug.cgi?id=200183 - Overview Divide zero in reset_curseg() when mounting a crafted f2fs image - Reproduce - Kernel message [ 588.281510] divide error: 0000 [#1] SMP KASAN PTI [ 588.282701] CPU: 0 PID: 1293 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 588.284000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 588.286178] RIP: 0010:reset_curseg+0x94/0x1a0 [ 588.298166] RSP: 0018:ffff8801e88d7940 EFLAGS: 00010246 [ 588.299360] RAX: 0000000000000014 RBX: ffff8801e1d46d00 RCX: ffffffffb88bf60b [ 588.300809] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e1d46d64 [ 588.305272] R13: 0000000000000000 R14: 0000000000000014 R15: 0000000000000000 [ 588.306822] FS: 00007fad85008840(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 588.308456] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 588.309623] CR2: 0000000001705078 CR3: 00000001f30f8000 CR4: 00000000000006f0 [ 588.311085] Call Trace: [ 588.311637] f2fs_build_segment_manager+0x103f/0x3410 [ 588.316136] ? f2fs_commit_super+0x1b0/0x1b0 [ 588.317031] ? set_blocksize+0x90/0x140 [ 588.319473] f2fs_mount+0x15/0x20 [ 588.320166] mount_fs+0x60/0x1a0 [ 588.320847] ? alloc_vfsmnt+0x309/0x360 [ 588.321647] vfs_kern_mount+0x6b/0x1a0 [ 588.322432] do_mount+0x34a/0x18c0 [ 588.323175] ? strndup_user+0x46/0x70 [ 588.323937] ? copy_mount_string+0x20/0x20 [ 588.324793] ? memcg_kmem_put_cache+0x1b/0xa0 [ 588.325702] ? kasan_check_write+0x14/0x20 [ 588.326562] ? _copy_from_user+0x6a/0x90 [ 588.327375] ? memdup_user+0x42/0x60 [ 588.328118] ksys_mount+0x83/0xd0 [ 588.328808] __x64_sys_mount+0x67/0x80 [ 588.329607] do_syscall_64+0x78/0x170 [ 588.330400] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 588.331461] RIP: 0033:0x7fad848e8b9a [ 588.336022] RSP: 002b:00007ffd7c5b6be8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 588.337547] RAX: ffffffffffffffda RBX: 00000000016f8030 RCX: 00007fad848e8b9a [ 588.338999] RDX: 00000000016f8210 RSI: 00000000016f9f30 RDI: 0000000001700ec0 [ 588.340442] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 588.341887] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001700ec0 [ 588.343341] R13: 00000000016f8210 R14: 0000000000000000 R15: 0000000000000003 [ 588.354891] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 588.355862] RIP: 0010:reset_curseg+0x94/0x1a0 [ 588.360742] RSP: 0018:ffff8801e88d7940 EFLAGS: 00010246 [ 588.361812] RAX: 0000000000000014 RBX: ffff8801e1d46d00 RCX: ffffffffb88bf60b [ 588.363485] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e1d46d64 [ 588.365213] RBP: ffff8801e88d7968 R08: ffffed003c32266f R09: ffffed003c32266f [ 588.366661] R10: 0000000000000001 R11: ffffed003c32266e R12: ffff8801f0337700 [ 588.368110] R13: 0000000000000000 R14: 0000000000000014 R15: 0000000000000000 [ 588.370057] FS: 00007fad85008840(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 588.372099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 588.373291] CR2: 0000000001705078 CR3: 00000001f30f8000 CR4: 00000000000006f0 - Location https://elixir.bootlin.com/linux/latest/source/fs/f2fs/segment.c#L2147 curseg->zone = GET_ZONE_FROM_SEG(sbi, curseg->segno); If secs_per_zone is corrupted due to fuzzing test, it will cause divide zero operation when using GET_ZONE_FROM_SEG macro, so we should do more sanity check with secs_per_zone during mount to avoid this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If FI_EXTRA_ATTR is set in inode by fuzzing, inode.i_addr[0] will be parsed as inode.i_extra_isize, then in __recover_inline_status, inline data address will beyond boundary of page, result in accessing invalid memory. So in this condition, during reading inode page, let's do sanity check with EXTRA_ATTR feature of fs and extra_attr bit of inode, if they're inconsistent, deny to load this inode. - Overview Out-of-bound access in f2fs_iget() when mounting a corrupted f2fs image - Reproduce The following message will be got in KASAN build of 4.18 upstream kernel. [ 819.392227] ================================================================== [ 819.393901] BUG: KASAN: slab-out-of-bounds in f2fs_iget+0x736/0x1530 [ 819.395329] Read of size 4 at addr ffff8801f099c968 by task mount/1292 [ 819.397079] CPU: 1 PID: 1292 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 819.397082] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 819.397088] Call Trace: [ 819.397124] dump_stack+0x7b/0xb5 [ 819.397154] print_address_description+0x70/0x290 [ 819.397159] kasan_report+0x291/0x390 [ 819.397163] ? f2fs_iget+0x736/0x1530 [ 819.397176] check_memory_region+0x139/0x190 [ 819.397182] __asan_loadN+0xf/0x20 [ 819.397185] f2fs_iget+0x736/0x1530 [ 819.397197] f2fs_fill_super+0x1b4f/0x2b40 [ 819.397202] ? f2fs_fill_super+0x1b4f/0x2b40 [ 819.397208] ? f2fs_commit_super+0x1b0/0x1b0 [ 819.397227] ? set_blocksize+0x90/0x140 [ 819.397241] mount_bdev+0x1c5/0x210 [ 819.397245] ? f2fs_commit_super+0x1b0/0x1b0 [ 819.397252] f2fs_mount+0x15/0x20 [ 819.397256] mount_fs+0x60/0x1a0 [ 819.397267] ? alloc_vfsmnt+0x309/0x360 [ 819.397272] vfs_kern_mount+0x6b/0x1a0 [ 819.397282] do_mount+0x34a/0x18c0 [ 819.397300] ? lockref_put_or_lock+0xcf/0x160 [ 819.397306] ? copy_mount_string+0x20/0x20 [ 819.397318] ? memcg_kmem_put_cache+0x1b/0xa0 [ 819.397324] ? kasan_check_write+0x14/0x20 [ 819.397334] ? _copy_from_user+0x6a/0x90 [ 819.397353] ? memdup_user+0x42/0x60 [ 819.397359] ksys_mount+0x83/0xd0 [ 819.397365] __x64_sys_mount+0x67/0x80 [ 819.397388] do_syscall_64+0x78/0x170 [ 819.397403] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 819.397422] RIP: 0033:0x7f54c667cb9a [ 819.397424] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 819.397483] RSP: 002b:00007ffd8f46cd08 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 819.397496] RAX: ffffffffffffffda RBX: 0000000000dfa030 RCX: 00007f54c667cb9a [ 819.397498] RDX: 0000000000dfa210 RSI: 0000000000dfbf30 RDI: 0000000000e02ec0 [ 819.397501] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 819.397503] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000000000e02ec0 [ 819.397505] R13: 0000000000dfa210 R14: 0000000000000000 R15: 0000000000000003 [ 819.397866] Allocated by task 139: [ 819.398702] save_stack+0x46/0xd0 [ 819.398705] kasan_kmalloc+0xad/0xe0 [ 819.398709] kasan_slab_alloc+0x11/0x20 [ 819.398713] kmem_cache_alloc+0xd1/0x1e0 [ 819.398717] dup_fd+0x50/0x4c0 [ 819.398740] copy_process.part.37+0xbed/0x32e0 [ 819.398744] _do_fork+0x16e/0x590 [ 819.398748] __x64_sys_clone+0x69/0x80 [ 819.398752] do_syscall_64+0x78/0x170 [ 819.398756] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 819.399097] Freed by task 159: [ 819.399743] save_stack+0x46/0xd0 [ 819.399747] __kasan_slab_free+0x13c/0x1a0 [ 819.399750] kasan_slab_free+0xe/0x10 [ 819.399754] kmem_cache_free+0x89/0x1e0 [ 819.399757] put_files_struct+0x132/0x150 [ 819.399761] exit_files+0x62/0x70 [ 819.399766] do_exit+0x47b/0x1390 [ 819.399770] do_group_exit+0x86/0x130 [ 819.399774] __x64_sys_exit_group+0x2c/0x30 [ 819.399778] do_syscall_64+0x78/0x170 [ 819.399782] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 819.400115] The buggy address belongs to the object at ffff8801f099c680 which belongs to the cache files_cache of size 704 [ 819.403234] The buggy address is located 40 bytes to the right of 704-byte region [ffff8801f099c680, ffff8801f099c940) [ 819.405689] The buggy address belongs to the page: [ 819.406709] page:ffffea0007c26700 count:1 mapcount:0 mapping:ffff8801f69a3340 index:0xffff8801f099d380 compound_mapcount: 0 [ 819.408984] flags: 0x2ffff0000008100(slab|head) [ 819.409932] raw: 02ffff0000008100 ffffea00077fb600 0000000200000002 ffff8801f69a3340 [ 819.411514] raw: ffff8801f099d380 0000000080130000 00000001ffffffff 0000000000000000 [ 819.413073] page dumped because: kasan: bad access detected [ 819.414539] Memory state around the buggy address: [ 819.415521] ffff8801f099c800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 819.416981] ffff8801f099c880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 819.418454] >ffff8801f099c900: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 819.419921] ^ [ 819.421265] ffff8801f099c980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 819.422745] ffff8801f099ca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 819.424206] ================================================================== [ 819.425668] Disabling lock debugging due to kernel taint [ 819.457463] F2FS-fs (loop0): Mounted with checkpoint version = 3 The kernel still mounts the image. If you run the following program on the mounted folder mnt, (poc.c) static void activity(char *mpoint) { char *foo_bar_baz; int err; static int buf[8192]; memset(buf, 0, sizeof(buf)); err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint); int fd = open(foo_bar_baz, O_RDONLY, 0); if (fd >= 0) { read(fd, (char *)buf, 11); close(fd); } } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } You can get kernel crash: [ 819.457463] F2FS-fs (loop0): Mounted with checkpoint version = 3 [ 918.028501] BUG: unable to handle kernel paging request at ffffed0048000d82 [ 918.044020] PGD 23ffee067 P4D 23ffee067 PUD 23fbef067 PMD 0 [ 918.045207] Oops: 0000 [#1] SMP KASAN PTI [ 918.046048] CPU: 0 PID: 1309 Comm: poc Tainted: G B 4.18.0-rc1+ #4 [ 918.047573] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 918.049552] RIP: 0010:check_memory_region+0x5e/0x190 [ 918.050565] Code: f8 49 c1 e8 03 49 89 db 49 c1 eb 03 4d 01 cb 4d 01 c1 4d 8d 63 01 4c 89 c8 4d 89 e2 4d 29 ca 49 83 fa 10 7f 3d 4d 85 d2 74 32 <41> 80 39 00 75 23 48 b8 01 00 00 00 00 fc ff df 4d 01 d1 49 01 c0 [ 918.054322] RSP: 0018:ffff8801e3a1f258 EFLAGS: 00010202 [ 918.055400] RAX: ffffed0048000d82 RBX: ffff880240006c11 RCX: ffffffffb8867d14 [ 918.056832] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff880240006c10 [ 918.058253] RBP: ffff8801e3a1f268 R08: 1ffff10048000d82 R09: ffffed0048000d82 [ 918.059717] R10: 0000000000000001 R11: ffffed0048000d82 R12: ffffed0048000d83 [ 918.061159] R13: ffff8801e3a1f390 R14: 0000000000000000 R15: ffff880240006c08 [ 918.062614] FS: 00007fac9732c700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 918.064246] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 918.065412] CR2: ffffed0048000d82 CR3: 00000001df77a000 CR4: 00000000000006f0 [ 918.066882] Call Trace: [ 918.067410] __asan_loadN+0xf/0x20 [ 918.068149] f2fs_find_target_dentry+0xf4/0x270 [ 918.069083] ? __get_node_page+0x331/0x5b0 [ 918.069925] f2fs_find_in_inline_dir+0x24b/0x310 [ 918.070881] ? f2fs_recover_inline_data+0x4c0/0x4c0 [ 918.071905] ? unwind_next_frame.part.5+0x34f/0x490 [ 918.072901] ? unwind_dump+0x290/0x290 [ 918.073695] ? is_bpf_text_address+0xe/0x20 [ 918.074566] __f2fs_find_entry+0x599/0x670 [ 918.075408] ? kasan_unpoison_shadow+0x36/0x50 [ 918.076315] ? kasan_kmalloc+0xad/0xe0 [ 918.077100] ? memcg_kmem_put_cache+0x55/0xa0 [ 918.077998] ? f2fs_find_target_dentry+0x270/0x270 [ 918.079006] ? d_set_d_op+0x30/0x100 [ 918.079749] ? __d_lookup_rcu+0x69/0x2e0 [ 918.080556] ? __d_alloc+0x275/0x450 [ 918.081297] ? kasan_check_write+0x14/0x20 [ 918.082135] ? memset+0x31/0x40 [ 918.082820] ? fscrypt_setup_filename+0x1ec/0x4c0 [ 918.083782] ? d_alloc_parallel+0x5bb/0x8c0 [ 918.084640] f2fs_find_entry+0xe9/0x110 [ 918.085432] ? __f2fs_find_entry+0x670/0x670 [ 918.086308] ? kasan_check_write+0x14/0x20 [ 918.087163] f2fs_lookup+0x297/0x590 [ 918.087902] ? f2fs_link+0x2b0/0x2b0 [ 918.088646] ? legitimize_path.isra.29+0x61/0xa0 [ 918.089589] __lookup_slow+0x12e/0x240 [ 918.090371] ? may_delete+0x2b0/0x2b0 [ 918.091123] ? __nd_alloc_stack+0xa0/0xa0 [ 918.091944] lookup_slow+0x44/0x60 [ 918.092642] walk_component+0x3ee/0xa40 [ 918.093428] ? is_bpf_text_address+0xe/0x20 [ 918.094283] ? pick_link+0x3e0/0x3e0 [ 918.095047] ? in_group_p+0xa5/0xe0 [ 918.095771] ? generic_permission+0x53/0x1e0 [ 918.096666] ? security_inode_permission+0x1d/0x70 [ 918.097646] ? inode_permission+0x7a/0x1f0 [ 918.098497] link_path_walk+0x2a2/0x7b0 [ 918.099298] ? apparmor_capget+0x3d0/0x3d0 [ 918.100140] ? walk_component+0xa40/0xa40 [ 918.100958] ? path_init+0x2e6/0x580 [ 918.101695] path_openat+0x1bb/0x2160 [ 918.102471] ? __save_stack_trace+0x92/0x100 [ 918.103352] ? save_stack+0xb5/0xd0 [ 918.104070] ? vfs_unlink+0x250/0x250 [ 918.104822] ? save_stack+0x46/0xd0 [ 918.105538] ? kasan_slab_alloc+0x11/0x20 [ 918.106370] ? kmem_cache_alloc+0xd1/0x1e0 [ 918.107213] ? getname_flags+0x76/0x2c0 [ 918.107997] ? getname+0x12/0x20 [ 918.108677] ? do_sys_open+0x14b/0x2c0 [ 918.109450] ? __x64_sys_open+0x4c/0x60 [ 918.110255] ? do_syscall_64+0x78/0x170 [ 918.111083] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 918.112148] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 918.113204] ? f2fs_empty_inline_dir+0x1e0/0x1e0 [ 918.114150] ? timespec64_trunc+0x5c/0x90 [ 918.114993] ? wb_io_lists_depopulated+0x1a/0xc0 [ 918.115937] ? inode_io_list_move_locked+0x102/0x110 [ 918.116949] do_filp_open+0x12b/0x1d0 [ 918.117709] ? may_open_dev+0x50/0x50 [ 918.118475] ? kasan_kmalloc+0xad/0xe0 [ 918.119246] do_sys_open+0x17c/0x2c0 [ 918.119983] ? do_sys_open+0x17c/0x2c0 [ 918.120751] ? filp_open+0x60/0x60 [ 918.121463] ? task_work_run+0x4d/0xf0 [ 918.122237] __x64_sys_open+0x4c/0x60 [ 918.123001] do_syscall_64+0x78/0x170 [ 918.123759] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 918.124802] RIP: 0033:0x7fac96e3e040 [ 918.125537] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 09 27 2d 00 00 75 10 b8 02 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 7e e0 01 00 48 89 04 24 [ 918.129341] RSP: 002b:00007fff1b37f848 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 [ 918.130870] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fac96e3e040 [ 918.132295] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000122d080 [ 918.133748] RBP: 00007fff1b37f9b0 R08: 00007fac9710bbd8 R09: 0000000000000001 [ 918.135209] R10: 000000000000069d R11: 0000000000000246 R12: 0000000000400c20 [ 918.136650] R13: 00007fff1b37fab0 R14: 0000000000000000 R15: 0000000000000000 [ 918.138093] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 918.147924] CR2: ffffed0048000d82 [ 918.148619] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 918.149563] RIP: 0010:check_memory_region+0x5e/0x190 [ 918.150576] Code: f8 49 c1 e8 03 49 89 db 49 c1 eb 03 4d 01 cb 4d 01 c1 4d 8d 63 01 4c 89 c8 4d 89 e2 4d 29 ca 49 83 fa 10 7f 3d 4d 85 d2 74 32 <41> 80 39 00 75 23 48 b8 01 00 00 00 00 fc ff df 4d 01 d1 49 01 c0 [ 918.154360] RSP: 0018:ffff8801e3a1f258 EFLAGS: 00010202 [ 918.155411] RAX: ffffed0048000d82 RBX: ffff880240006c11 RCX: ffffffffb8867d14 [ 918.156833] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff880240006c10 [ 918.158257] RBP: ffff8801e3a1f268 R08: 1ffff10048000d82 R09: ffffed0048000d82 [ 918.159722] R10: 0000000000000001 R11: ffffed0048000d82 R12: ffffed0048000d83 [ 918.161149] R13: ffff8801e3a1f390 R14: 0000000000000000 R15: ffff880240006c08 [ 918.162587] FS: 00007fac9732c700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 918.164203] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 918.165356] CR2: ffffed0048000d82 CR3: 00000001df77a000 CR4: 00000000000006f0 Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch fixs to do sanity check with user_block_count. - Overview Divide zero in utilization when mount() a corrupted f2fs image - Reproduce (4.18 upstream kernel) - Kernel message [ 564.099503] F2FS-fs (loop0): invalid crc value [ 564.101991] divide error: 0000 [#1] SMP KASAN PTI [ 564.103103] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Not tainted 4.18.0-rc1+ #4 [ 564.104584] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.106624] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.107692] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.111686] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.112775] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.114250] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.115706] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.117177] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.118634] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.120094] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.121748] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.122923] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.124383] Call Trace: [ 564.124924] ? __issue_discard_cmd+0x480/0x480 [ 564.125882] ? __sched_text_start+0x8/0x8 [ 564.126756] ? __kthread_parkme+0xcb/0x100 [ 564.127620] ? kthread_blkcg+0x70/0x70 [ 564.128412] kthread+0x180/0x1d0 [ 564.129105] ? __issue_discard_cmd+0x480/0x480 [ 564.130029] ? kthread_associate_blkcg+0x150/0x150 [ 564.131033] ret_from_fork+0x35/0x40 [ 564.131794] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 564.141798] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 564.142773] RIP: 0010:issue_discard_thread+0x248/0x5c0 [ 564.143885] Code: ff ff 48 8b bd e8 fe ff ff 41 8b 9d 4c 04 00 00 e8 cd b8 ad ff 41 8b 85 50 04 00 00 31 d2 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <48> f7 f3 83 f8 50 7e 16 41 c7 86 7c ff ff ff 01 00 00 00 41 c7 86 [ 564.147776] RSP: 0018:ffff8801f3117dc0 EFLAGS: 00010206 [ 564.148856] RAX: 0000000000000384 RBX: 0000000000000000 RCX: ffffffffb88c1e03 [ 564.150424] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffff8801e3aa4850 [ 564.151906] RBP: ffff8801f3117f00 R08: 1ffffffff751a1d0 R09: fffffbfff751a1d0 [ 564.153463] R10: 0000000000000001 R11: fffffbfff751a1d0 R12: 00000000fffffffc [ 564.154915] R13: ffff8801e3aa4400 R14: ffff8801f3117ed8 R15: ffff8801e2050000 [ 564.156405] FS: 0000000000000000(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 564.158070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 564.159279] CR2: 000000000202b078 CR3: 00000001f11ac000 CR4: 00000000000006e0 [ 564.161043] ================================================================== [ 564.162587] BUG: KASAN: stack-out-of-bounds in from_kuid_munged+0x1d/0x50 [ 564.163994] Read of size 4 at addr ffff8801f3117c84 by task f2fs_discard-7:/1298 [ 564.165852] CPU: 1 PID: 1298 Comm: f2fs_discard-7: Tainted: G D 4.18.0-rc1+ #4 [ 564.167593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 564.169522] Call Trace: [ 564.170057] dump_stack+0x7b/0xb5 [ 564.170778] print_address_description+0x70/0x290 [ 564.171765] kasan_report+0x291/0x390 [ 564.172540] ? from_kuid_munged+0x1d/0x50 [ 564.173408] __asan_load4+0x78/0x80 [ 564.174148] from_kuid_munged+0x1d/0x50 [ 564.174962] do_notify_parent+0x1f5/0x4f0 [ 564.175808] ? send_sigqueue+0x390/0x390 [ 564.176639] ? css_set_move_task+0x152/0x340 [ 564.184197] do_exit+0x1290/0x1390 [ 564.184950] ? __issue_discard_cmd+0x480/0x480 [ 564.185884] ? mm_update_next_owner+0x380/0x380 [ 564.186829] ? __sched_text_start+0x8/0x8 [ 564.187672] ? __kthread_parkme+0xcb/0x100 [ 564.188528] ? kthread_blkcg+0x70/0x70 [ 564.189333] ? kthread+0x180/0x1d0 [ 564.190052] ? __issue_discard_cmd+0x480/0x480 [ 564.190983] rewind_stack_do_exit+0x17/0x20 [ 564.192190] The buggy address belongs to the page: [ 564.193213] page:ffffea0007cc45c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 564.194856] flags: 0x2ffff0000000000() [ 564.195644] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 564.197247] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 564.198826] page dumped because: kasan: bad access detected [ 564.200299] Memory state around the buggy address: [ 564.201306] ffff8801f3117b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.202779] ffff8801f3117c00: 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 [ 564.204252] >ffff8801f3117c80: f3 f3 f3 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 564.205742] ^ [ 564.206424] ffff8801f3117d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 564.207908] ffff8801f3117d80: f3 f3 f3 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 [ 564.209389] ================================================================== [ 564.231795] F2FS-fs (loop0): Mounted with checkpoint version = 2 - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L586 return div_u64((u64)valid_user_blocks(sbi) * 100, sbi->user_block_count); Missing checks on sbi->user_block_count. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch adds to do sanity check with below fields of inode to avoid reported panic. - node footer - iblocks https://bugzilla.kernel.org/show_bug.cgi?id=200223 - Overview BUG() triggered in f2fs_truncate_inode_blocks() when un-mounting a mounted f2fs image after writing to it - Reproduce - POC (poc.c) static void activity(char *mpoint) { char *foo_bar_baz; int err; static int buf[8192]; memset(buf, 0, sizeof(buf)); err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint); // open / write / read int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777); if (fd >= 0) { write(fd, (char *)buf, 517); write(fd, (char *)buf, sizeof(buf)); close(fd); } } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } - Kernel meesage [ 552.479723] F2FS-fs (loop0): Mounted with checkpoint version = 2 [ 556.451891] ------------[ cut here ]------------ [ 556.451899] kernel BUG at fs/f2fs/node.c:987! [ 556.452920] invalid opcode: 0000 [#1] SMP KASAN PTI [ 556.453936] CPU: 1 PID: 1310 Comm: umount Not tainted 4.18.0-rc1+ #4 [ 556.455213] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 556.457140] RIP: 0010:f2fs_truncate_inode_blocks+0x4a7/0x6f0 [ 556.458280] Code: e8 ae ea ff ff 41 89 c7 c1 e8 1f 84 c0 74 0a 41 83 ff fe 0f 85 35 ff ff ff 81 85 b0 fe ff ff fb 03 00 00 e9 f7 fd ff ff 0f 0b <0f> 0b e8 62 b7 9a 00 48 8b bd a0 fe ff ff e8 56 54 ae ff 48 8b b5 [ 556.462015] RSP: 0018:ffff8801f292f808 EFLAGS: 00010286 [ 556.463068] RAX: ffffed003e73242d RBX: ffff8801f292f958 RCX: ffffffffb88b81bc [ 556.464479] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff8801f3992164 [ 556.465901] RBP: ffff8801f292f980 R08: ffffed003e73242d R09: ffffed003e73242d [ 556.467311] R10: 0000000000000001 R11: ffffed003e73242c R12: 00000000fffffc64 [ 556.468706] R13: ffff8801f3992000 R14: 0000000000000058 R15: 00000000ffff8801 [ 556.470117] FS: 00007f8029297840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 556.471702] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 556.472838] CR2: 000055f5f57305d8 CR3: 00000001f18b0000 CR4: 00000000000006e0 [ 556.474265] Call Trace: [ 556.474782] ? f2fs_alloc_nid_failed+0xf0/0xf0 [ 556.475686] ? truncate_nodes+0x980/0x980 [ 556.476516] ? pagecache_get_page+0x21f/0x2f0 [ 556.477412] ? __asan_loadN+0xf/0x20 [ 556.478153] ? __get_node_page+0x331/0x5b0 [ 556.478992] ? reweight_entity+0x1e6/0x3b0 [ 556.479826] f2fs_truncate_blocks+0x55e/0x740 [ 556.480709] ? f2fs_truncate_data_blocks+0x20/0x20 [ 556.481689] ? __radix_tree_lookup+0x34/0x160 [ 556.482630] ? radix_tree_lookup+0xd/0x10 [ 556.483445] f2fs_truncate+0xd4/0x1a0 [ 556.484206] f2fs_evict_inode+0x5ce/0x630 [ 556.485032] evict+0x16f/0x290 [ 556.485664] iput+0x280/0x300 [ 556.486300] dentry_unlink_inode+0x165/0x1e0 [ 556.487169] __dentry_kill+0x16a/0x260 [ 556.487936] dentry_kill+0x70/0x250 [ 556.488651] shrink_dentry_list+0x125/0x260 [ 556.489504] shrink_dcache_parent+0xc1/0x110 [ 556.490379] ? shrink_dcache_sb+0x200/0x200 [ 556.491231] ? bit_wait_timeout+0xc0/0xc0 [ 556.492047] do_one_tree+0x12/0x40 [ 556.492743] shrink_dcache_for_umount+0x3f/0xa0 [ 556.493656] generic_shutdown_super+0x43/0x1c0 [ 556.494561] kill_block_super+0x52/0x80 [ 556.495341] kill_f2fs_super+0x62/0x70 [ 556.496105] deactivate_locked_super+0x6f/0xa0 [ 556.497004] deactivate_super+0x5e/0x80 [ 556.497785] cleanup_mnt+0x61/0xa0 [ 556.498492] __cleanup_mnt+0x12/0x20 [ 556.499218] task_work_run+0xc8/0xf0 [ 556.499949] exit_to_usermode_loop+0x125/0x130 [ 556.500846] do_syscall_64+0x138/0x170 [ 556.501609] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 556.502659] RIP: 0033:0x7f8028b77487 [ 556.503384] Code: 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 c9 2b 00 f7 d8 64 89 01 48 [ 556.507137] RSP: 002b:00007fff9f2e3598 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 556.508637] RAX: 0000000000000000 RBX: 0000000000ebd030 RCX: 00007f8028b77487 [ 556.510069] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000ec41e0 [ 556.511481] RBP: 0000000000ec41e0 R08: 0000000000000000 R09: 0000000000000014 [ 556.512892] R10: 00000000000006b2 R11: 0000000000000246 R12: 00007f802908083c [ 556.514320] R13: 0000000000000000 R14: 0000000000ebd210 R15: 00007fff9f2e3820 [ 556.515745] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 556.529276] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 556.530340] RIP: 0010:f2fs_truncate_inode_blocks+0x4a7/0x6f0 [ 556.531513] Code: e8 ae ea ff ff 41 89 c7 c1 e8 1f 84 c0 74 0a 41 83 ff fe 0f 85 35 ff ff ff 81 85 b0 fe ff ff fb 03 00 00 e9 f7 fd ff ff 0f 0b <0f> 0b e8 62 b7 9a 00 48 8b bd a0 fe ff ff e8 56 54 ae ff 48 8b b5 [ 556.535330] RSP: 0018:ffff8801f292f808 EFLAGS: 00010286 [ 556.536395] RAX: ffffed003e73242d RBX: ffff8801f292f958 RCX: ffffffffb88b81bc [ 556.537824] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff8801f3992164 [ 556.539290] RBP: ffff8801f292f980 R08: ffffed003e73242d R09: ffffed003e73242d [ 556.540709] R10: 0000000000000001 R11: ffffed003e73242c R12: 00000000fffffc64 [ 556.542131] R13: ffff8801f3992000 R14: 0000000000000058 R15: 00000000ffff8801 [ 556.543579] FS: 00007f8029297840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 556.545180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 556.546338] CR2: 000055f5f57305d8 CR3: 00000001f18b0000 CR4: 00000000000006e0 [ 556.547809] ================================================================== [ 556.549248] BUG: KASAN: stack-out-of-bounds in arch_tlb_gather_mmu+0x52/0x170 [ 556.550672] Write of size 8 at addr ffff8801f292fd10 by task umount/1310 [ 556.552338] CPU: 1 PID: 1310 Comm: umount Tainted: G D 4.18.0-rc1+ #4 [ 556.553886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 556.555756] Call Trace: [ 556.556264] dump_stack+0x7b/0xb5 [ 556.556944] print_address_description+0x70/0x290 [ 556.557903] kasan_report+0x291/0x390 [ 556.558649] ? arch_tlb_gather_mmu+0x52/0x170 [ 556.559537] __asan_store8+0x57/0x90 [ 556.560268] arch_tlb_gather_mmu+0x52/0x170 [ 556.561110] tlb_gather_mmu+0x12/0x40 [ 556.561862] exit_mmap+0x123/0x2a0 [ 556.562555] ? __ia32_sys_munmap+0x50/0x50 [ 556.563384] ? exit_aio+0x98/0x230 [ 556.564079] ? __x32_compat_sys_io_submit+0x260/0x260 [ 556.565099] ? taskstats_exit+0x1f4/0x640 [ 556.565925] ? kasan_check_read+0x11/0x20 [ 556.566739] ? mm_update_next_owner+0x322/0x380 [ 556.567652] mmput+0x8b/0x1d0 [ 556.568260] do_exit+0x43a/0x1390 [ 556.568937] ? mm_update_next_owner+0x380/0x380 [ 556.569855] ? deactivate_super+0x5e/0x80 [ 556.570668] ? cleanup_mnt+0x61/0xa0 [ 556.571395] ? __cleanup_mnt+0x12/0x20 [ 556.572156] ? task_work_run+0xc8/0xf0 [ 556.572917] ? exit_to_usermode_loop+0x125/0x130 [ 556.573861] rewind_stack_do_exit+0x17/0x20 [ 556.574707] RIP: 0033:0x7f8028b77487 [ 556.575428] Code: Bad RIP value. [ 556.576106] RSP: 002b:00007fff9f2e3598 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 556.577599] RAX: 0000000000000000 RBX: 0000000000ebd030 RCX: 00007f8028b77487 [ 556.579020] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000ec41e0 [ 556.580422] RBP: 0000000000ec41e0 R08: 0000000000000000 R09: 0000000000000014 [ 556.581833] R10: 00000000000006b2 R11: 0000000000000246 R12: 00007f802908083c [ 556.583252] R13: 0000000000000000 R14: 0000000000ebd210 R15: 00007fff9f2e3820 [ 556.584983] The buggy address belongs to the page: [ 556.585961] page:ffffea0007ca4bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 556.587540] flags: 0x2ffff0000000000() [ 556.588296] raw: 02ffff0000000000 0000000000000000 dead000000000200 0000000000000000 [ 556.589822] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 556.591359] page dumped because: kasan: bad access detected [ 556.592786] Memory state around the buggy address: [ 556.593753] ffff8801f292fc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 556.595191] ffff8801f292fc80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 [ 556.596613] >ffff8801f292fd00: 00 00 f3 00 00 00 00 f3 f3 00 00 00 00 f4 f4 f4 [ 556.598044] ^ [ 556.598797] ffff8801f292fd80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 556.600225] ffff8801f292fe00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 f4 f4 f4 [ 556.601647] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/node.c#L987 case NODE_DIND_BLOCK: err = truncate_nodes(&dn, nofs, offset[1], 3); cont = 0; break; default: BUG(); <--- } Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This patch add to do sanity check with below field: - cp_pack_total_block_count - blkaddr of data/node - extent info - Overview BUG() in verify_block_addr() when writing to a corrupted f2fs image - Reproduce (4.18 upstream kernel) - POC (poc.c) static void activity(char *mpoint) { char *foo_bar_baz; int err; static int buf[8192]; memset(buf, 0, sizeof(buf)); err = asprintf(&foo_bar_baz, "%s/foo/bar/baz", mpoint); int fd = open(foo_bar_baz, O_RDWR | O_TRUNC, 0777); if (fd >= 0) { write(fd, (char *)buf, sizeof(buf)); fdatasync(fd); close(fd); } } int main(int argc, char *argv[]) { activity(argv[1]); return 0; } - Kernel message [ 689.349473] F2FS-fs (loop0): Mounted with checkpoint version = 3 [ 699.728662] WARNING: CPU: 0 PID: 1309 at fs/f2fs/segment.c:2860 f2fs_inplace_write_data+0x232/0x240 [ 699.728670] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.729056] CPU: 0 PID: 1309 Comm: a.out Not tainted 4.18.0-rc1+ #4 [ 699.729064] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.729074] RIP: 0010:f2fs_inplace_write_data+0x232/0x240 [ 699.729076] Code: ff e9 cf fe ff ff 49 8d 7d 10 e8 39 45 ad ff 4d 8b 7d 10 be 04 00 00 00 49 8d 7f 48 e8 07 49 ad ff 45 8b 7f 48 e9 fb fe ff ff <0f> 0b f0 41 80 4d 48 04 e9 65 fe ff ff 90 66 66 66 66 90 55 48 8d [ 699.729130] RSP: 0018:ffff8801f43af568 EFLAGS: 00010202 [ 699.729139] RAX: 000000000000003f RBX: ffff8801f43af7b8 RCX: ffffffffb88c9113 [ 699.729142] RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8802024e5540 [ 699.729144] RBP: ffff8801f43af590 R08: 0000000000000009 R09: ffffffffffffffe8 [ 699.729147] R10: 0000000000000001 R11: ffffed0039b0596a R12: ffff8802024e5540 [ 699.729149] R13: ffff8801f0335500 R14: ffff8801e3e7a700 R15: ffff8801e1ee4450 [ 699.729154] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.729156] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.729159] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.729171] Call Trace: [ 699.729192] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.729203] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.729238] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.729269] ? __radix_tree_replace+0xa3/0x120 [ 699.729276] __write_data_page+0x5c7/0xe30 [ 699.729291] ? kasan_check_read+0x11/0x20 [ 699.729310] ? page_mapped+0x8a/0x110 [ 699.729321] ? page_mkclean+0xe9/0x160 [ 699.729327] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.729331] ? invalid_page_referenced_vma+0x130/0x130 [ 699.729345] ? clear_page_dirty_for_io+0x332/0x450 [ 699.729351] f2fs_write_cache_pages+0x4ca/0x860 [ 699.729358] ? __write_data_page+0xe30/0xe30 [ 699.729374] ? percpu_counter_add_batch+0x22/0xa0 [ 699.729380] ? kasan_check_write+0x14/0x20 [ 699.729391] ? _raw_spin_lock+0x17/0x40 [ 699.729403] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.729413] ? iov_iter_advance+0x113/0x640 [ 699.729418] ? f2fs_write_end+0x133/0x2e0 [ 699.729423] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.729428] f2fs_write_data_pages+0x329/0x520 [ 699.729433] ? generic_perform_write+0x250/0x320 [ 699.729438] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729454] ? current_time+0x110/0x110 [ 699.729459] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.729464] do_writepages+0x37/0xb0 [ 699.729468] ? f2fs_write_cache_pages+0x860/0x860 [ 699.729472] ? do_writepages+0x37/0xb0 [ 699.729478] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.729483] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.729496] ? __vfs_write+0x2b2/0x410 [ 699.729501] file_write_and_wait_range+0x66/0xb0 [ 699.729506] f2fs_do_sync_file+0x1f9/0xd90 [ 699.729511] ? truncate_partial_data_page+0x290/0x290 [ 699.729521] ? __sb_end_write+0x30/0x50 [ 699.729526] ? vfs_write+0x20f/0x260 [ 699.729530] f2fs_sync_file+0x9a/0xb0 [ 699.729534] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.729548] vfs_fsync_range+0x68/0x100 [ 699.729554] ? __fget_light+0xc9/0xe0 [ 699.729558] do_fsync+0x3d/0x70 [ 699.729562] __x64_sys_fdatasync+0x24/0x30 [ 699.729585] do_syscall_64+0x78/0x170 [ 699.729595] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.729613] RIP: 0033:0x7f9bf930d800 [ 699.729615] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.729668] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.729673] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.729675] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.729678] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.729680] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.729683] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.729687] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 699.729782] ------------[ cut here ]------------ [ 699.729785] kernel BUG at fs/f2fs/segment.h:654! [ 699.731055] invalid opcode: 0000 [#1] SMP KASAN PTI [ 699.732104] CPU: 0 PID: 1309 Comm: a.out Tainted: G W 4.18.0-rc1+ #4 [ 699.733684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.735611] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.736649] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.740524] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.741573] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.743006] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.744426] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.745833] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.747256] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.748683] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.750293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.751462] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.752874] Call Trace: [ 699.753386] ? f2fs_inplace_write_data+0x93/0x240 [ 699.754341] f2fs_inplace_write_data+0xd2/0x240 [ 699.755271] f2fs_do_write_data_page+0x2e2/0xe00 [ 699.756214] ? f2fs_should_update_outplace+0xd0/0xd0 [ 699.757215] ? memcg_drain_all_list_lrus+0x280/0x280 [ 699.758209] ? __radix_tree_replace+0xa3/0x120 [ 699.759164] __write_data_page+0x5c7/0xe30 [ 699.760002] ? kasan_check_read+0x11/0x20 [ 699.760823] ? page_mapped+0x8a/0x110 [ 699.761573] ? page_mkclean+0xe9/0x160 [ 699.762345] ? f2fs_do_write_data_page+0xe00/0xe00 [ 699.763332] ? invalid_page_referenced_vma+0x130/0x130 [ 699.764374] ? clear_page_dirty_for_io+0x332/0x450 [ 699.765347] f2fs_write_cache_pages+0x4ca/0x860 [ 699.766276] ? __write_data_page+0xe30/0xe30 [ 699.767161] ? percpu_counter_add_batch+0x22/0xa0 [ 699.768112] ? kasan_check_write+0x14/0x20 [ 699.768951] ? _raw_spin_lock+0x17/0x40 [ 699.769739] ? f2fs_mark_inode_dirty_sync.part.18+0x16/0x30 [ 699.770885] ? iov_iter_advance+0x113/0x640 [ 699.771743] ? f2fs_write_end+0x133/0x2e0 [ 699.772569] ? balance_dirty_pages_ratelimited+0x239/0x640 [ 699.773680] f2fs_write_data_pages+0x329/0x520 [ 699.774603] ? generic_perform_write+0x250/0x320 [ 699.775544] ? f2fs_write_cache_pages+0x860/0x860 [ 699.776510] ? current_time+0x110/0x110 [ 699.777299] ? f2fs_preallocate_blocks+0x1ef/0x370 [ 699.778279] do_writepages+0x37/0xb0 [ 699.779026] ? f2fs_write_cache_pages+0x860/0x860 [ 699.779978] ? do_writepages+0x37/0xb0 [ 699.780755] __filemap_fdatawrite_range+0x19a/0x1f0 [ 699.781746] ? delete_from_page_cache_batch+0x4e0/0x4e0 [ 699.782820] ? __vfs_write+0x2b2/0x410 [ 699.783597] file_write_and_wait_range+0x66/0xb0 [ 699.784540] f2fs_do_sync_file+0x1f9/0xd90 [ 699.785381] ? truncate_partial_data_page+0x290/0x290 [ 699.786415] ? __sb_end_write+0x30/0x50 [ 699.787204] ? vfs_write+0x20f/0x260 [ 699.787941] f2fs_sync_file+0x9a/0xb0 [ 699.788694] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.789572] vfs_fsync_range+0x68/0x100 [ 699.790360] ? __fget_light+0xc9/0xe0 [ 699.791128] do_fsync+0x3d/0x70 [ 699.791779] __x64_sys_fdatasync+0x24/0x30 [ 699.792614] do_syscall_64+0x78/0x170 [ 699.793371] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 699.794406] RIP: 0033:0x7f9bf930d800 [ 699.795134] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 49 bf 2c 00 00 75 10 b8 4b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be 78 01 00 48 89 04 24 [ 699.798960] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.800483] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.801923] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.803373] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.804798] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.806233] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.807667] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 699.817079] ---[ end trace 4ce02f25ff7d3df6 ]--- [ 699.818068] RIP: 0010:f2fs_submit_page_bio+0x29b/0x730 [ 699.819114] Code: 54 49 8d bd 18 04 00 00 e8 b2 59 af ff 41 8b 8d 18 04 00 00 8b 45 b8 41 d3 e6 44 01 f0 4c 8d 73 14 41 39 c7 0f 82 37 fe ff ff <0f> 0b 65 8b 05 2c 04 77 47 89 c0 48 0f a3 05 52 c1 d5 01 0f 92 c0 [ 699.822919] RSP: 0018:ffff8801f43af508 EFLAGS: 00010283 [ 699.823977] RAX: 0000000000000000 RBX: ffff8801f43af7b8 RCX: ffffffffb88a7cef [ 699.825436] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8801e3e7a64c [ 699.826881] RBP: ffff8801f43af558 R08: ffffed003e066b55 R09: ffffed003e066b55 [ 699.828292] R10: 0000000000000001 R11: ffffed003e066b54 R12: ffffea0007876940 [ 699.829750] R13: ffff8801f0335500 R14: ffff8801e3e7a600 R15: 0000000000000001 [ 699.831192] FS: 00007f9bf97f5700(0000) GS:ffff8801f6e00000(0000) knlGS:0000000000000000 [ 699.832793] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 699.833981] CR2: 00007f9bf925d170 CR3: 00000001f0c34000 CR4: 00000000000006f0 [ 699.835556] ================================================================== [ 699.837029] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0 [ 699.838462] Read of size 8 at addr ffff8801f43af970 by task a.out/1309 [ 699.840086] CPU: 0 PID: 1309 Comm: a.out Tainted: G D W 4.18.0-rc1+ #4 [ 699.841603] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 699.843475] Call Trace: [ 699.843982] dump_stack+0x7b/0xb5 [ 699.844661] print_address_description+0x70/0x290 [ 699.845607] kasan_report+0x291/0x390 [ 699.846351] ? update_stack_state+0x38c/0x3e0 [ 699.853831] __asan_load8+0x54/0x90 [ 699.854569] update_stack_state+0x38c/0x3e0 [ 699.855428] ? __read_once_size_nocheck.constprop.7+0x20/0x20 [ 699.856601] ? __save_stack_trace+0x5e/0x100 [ 699.857476] unwind_next_frame.part.5+0x18e/0x490 [ 699.858448] ? unwind_dump+0x290/0x290 [ 699.859217] ? clear_page_dirty_for_io+0x332/0x450 [ 699.860185] __unwind_start+0x106/0x190 [ 699.860974] __save_stack_trace+0x5e/0x100 [ 699.861808] ? __save_stack_trace+0x5e/0x100 [ 699.862691] ? unlink_anon_vmas+0xba/0x2c0 [ 699.863525] save_stack_trace+0x1f/0x30 [ 699.864312] save_stack+0x46/0xd0 [ 699.864993] ? __alloc_pages_slowpath+0x1420/0x1420 [ 699.865990] ? flush_tlb_mm_range+0x15e/0x220 [ 699.866889] ? kasan_check_write+0x14/0x20 [ 699.867724] ? __dec_node_state+0x92/0xb0 [ 699.868543] ? lock_page_memcg+0x85/0xf0 [ 699.869350] ? unlock_page_memcg+0x16/0x80 [ 699.870185] ? page_remove_rmap+0x198/0x520 [ 699.871048] ? mark_page_accessed+0x133/0x200 [ 699.871930] ? _cond_resched+0x1a/0x50 [ 699.872700] ? unmap_page_range+0xcd4/0xe50 [ 699.873551] ? rb_next+0x58/0x80 [ 699.874217] ? rb_next+0x58/0x80 [ 699.874895] __kasan_slab_free+0x13c/0x1a0 [ 699.875734] ? unlink_anon_vmas+0xba/0x2c0 [ 699.876563] kasan_slab_free+0xe/0x10 [ 699.877315] kmem_cache_free+0x89/0x1e0 [ 699.878095] unlink_anon_vmas+0xba/0x2c0 [ 699.878913] free_pgtables+0x101/0x1b0 [ 699.879677] exit_mmap+0x146/0x2a0 [ 699.880378] ? __ia32_sys_munmap+0x50/0x50 [ 699.881214] ? kasan_check_read+0x11/0x20 [ 699.882052] ? mm_update_next_owner+0x322/0x380 [ 699.882985] mmput+0x8b/0x1d0 [ 699.883602] do_exit+0x43a/0x1390 [ 699.884288] ? mm_update_next_owner+0x380/0x380 [ 699.885212] ? f2fs_sync_file+0x9a/0xb0 [ 699.885995] ? f2fs_do_sync_file+0xd90/0xd90 [ 699.886877] ? vfs_fsync_range+0x68/0x100 [ 699.887694] ? __fget_light+0xc9/0xe0 [ 699.888442] ? do_fsync+0x3d/0x70 [ 699.889118] ? __x64_sys_fdatasync+0x24/0x30 [ 699.889996] rewind_stack_do_exit+0x17/0x20 [ 699.890860] RIP: 0033:0x7f9bf930d800 [ 699.891585] Code: Bad RIP value. [ 699.892268] RSP: 002b:00007ffee3606c68 EFLAGS: 00000246 ORIG_RAX: 000000000000004b [ 699.893781] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bf930d800 [ 699.895220] RDX: 0000000000008000 RSI: 00000000006010a0 RDI: 0000000000000003 [ 699.896643] RBP: 00007ffee3606ca0 R08: 0000000001503010 R09: 0000000000000000 [ 699.898069] R10: 00000000000002e8 R11: 0000000000000246 R12: 0000000000400610 [ 699.899505] R13: 00007ffee3606da0 R14: 0000000000000000 R15: 0000000000000000 [ 699.901241] The buggy address belongs to the page: [ 699.902215] page:ffffea0007d0ebc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 699.903811] flags: 0x2ffff0000000000() [ 699.904585] raw: 02ffff0000000000 0000000000000000 ffffffff07d00101 0000000000000000 [ 699.906125] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 699.907673] page dumped because: kasan: bad access detected [ 699.909108] Memory state around the buggy address: [ 699.910077] ffff8801f43af800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00 [ 699.911528] ffff8801f43af880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 699.912953] >ffff8801f43af900: 00 00 00 00 00 00 00 00 f1 01 f4 f4 f4 f2 f2 f2 [ 699.914392] ^ [ 699.915758] ffff8801f43af980: f2 00 f4 f4 00 00 00 00 f2 00 00 00 00 00 00 00 [ 699.917193] ffff8801f43afa00: 00 00 00 00 00 00 00 00 00 f3 f3 f3 00 00 00 00 [ 699.918634] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.h#L644 Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

https://bugzilla.kernel.org/show_bug.cgi?id=200221 - Overview BUG() in clear_inode() when mounting and un-mounting a corrupted f2fs image - Reproduce - Kernel message [ 538.601448] F2FS-fs (loop0): Invalid segment/section count (31, 24 x 1376257) [ 538.601458] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 538.724091] F2FS-fs (loop0): Try to recover 2th superblock, ret: 0 [ 538.724102] F2FS-fs (loop0): Mounted with checkpoint version = 2 [ 540.970834] ------------[ cut here ]------------ [ 540.970838] kernel BUG at fs/inode.c:512! [ 540.971750] invalid opcode: 0000 [#1] SMP KASAN PTI [ 540.972755] CPU: 1 PID: 1305 Comm: umount Not tainted 4.18.0-rc1+ #4 [ 540.974034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 540.982913] RIP: 0010:clear_inode+0xc0/0xd0 [ 540.983774] Code: 8d a3 30 01 00 00 4c 89 e7 e8 1c ec f8 ff 48 8b 83 30 01 00 00 49 39 c4 75 1a 48 c7 83 a0 00 00 00 60 00 00 00 5b 41 5c 5d c3 <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 1f 40 00 66 66 66 66 90 55 [ 540.987570] RSP: 0018:ffff8801e34a7b70 EFLAGS: 00010002 [ 540.988636] RAX: 0000000000000000 RBX: ffff8801e9b744e8 RCX: ffffffffb840eb3a [ 540.990063] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8801e9b746b8 [ 540.991499] RBP: ffff8801e34a7b80 R08: ffffed003d36e8ce R09: ffffed003d36e8ce [ 540.992923] R10: 0000000000000001 R11: ffffed003d36e8cd R12: ffff8801e9b74668 [ 540.994360] R13: ffff8801e9b74760 R14: ffff8801e9b74528 R15: ffff8801e9b74530 [ 540.995786] FS: 00007f4662bdf840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 540.997403] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 540.998571] CR2: 000000000175c568 CR3: 00000001dcfe6000 CR4: 00000000000006e0 [ 541.000015] Call Trace: [ 541.000554] f2fs_evict_inode+0x253/0x630 [ 541.001381] evict+0x16f/0x290 [ 541.002015] iput+0x280/0x300 [ 541.002654] dentry_unlink_inode+0x165/0x1e0 [ 541.003528] __dentry_kill+0x16a/0x260 [ 541.004300] dentry_kill+0x70/0x250 [ 541.005018] dput+0x154/0x1d0 [ 541.005635] do_one_tree+0x34/0x40 [ 541.006354] shrink_dcache_for_umount+0x3f/0xa0 [ 541.007285] generic_shutdown_super+0x43/0x1c0 [ 541.008192] kill_block_super+0x52/0x80 [ 541.008978] kill_f2fs_super+0x62/0x70 [ 541.009750] deactivate_locked_super+0x6f/0xa0 [ 541.010664] deactivate_super+0x5e/0x80 [ 541.011450] cleanup_mnt+0x61/0xa0 [ 541.012151] __cleanup_mnt+0x12/0x20 [ 541.012893] task_work_run+0xc8/0xf0 [ 541.013635] exit_to_usermode_loop+0x125/0x130 [ 541.014555] do_syscall_64+0x138/0x170 [ 541.015340] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 541.016375] RIP: 0033:0x7f46624bf487 [ 541.017104] Code: 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 c9 2b 00 f7 d8 64 89 01 48 [ 541.020923] RSP: 002b:00007fff5e12e9a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 541.022452] RAX: 0000000000000000 RBX: 0000000001753030 RCX: 00007f46624bf487 [ 541.023885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000175a1e0 [ 541.025318] RBP: 000000000175a1e0 R08: 0000000000000000 R09: 0000000000000014 [ 541.026755] R10: 00000000000006b2 R11: 0000000000000246 R12: 00007f46629c883c [ 541.028186] R13: 0000000000000000 R14: 0000000001753210 R15: 00007fff5e12ec30 [ 541.029626] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 541.039445] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 541.040392] RIP: 0010:clear_inode+0xc0/0xd0 [ 541.041240] Code: 8d a3 30 01 00 00 4c 89 e7 e8 1c ec f8 ff 48 8b 83 30 01 00 00 49 39 c4 75 1a 48 c7 83 a0 00 00 00 60 00 00 00 5b 41 5c 5d c3 <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 1f 40 00 66 66 66 66 90 55 [ 541.045042] RSP: 0018:ffff8801e34a7b70 EFLAGS: 00010002 [ 541.046099] RAX: 0000000000000000 RBX: ffff8801e9b744e8 RCX: ffffffffb840eb3a [ 541.047537] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8801e9b746b8 [ 541.048965] RBP: ffff8801e34a7b80 R08: ffffed003d36e8ce R09: ffffed003d36e8ce [ 541.050402] R10: 0000000000000001 R11: ffffed003d36e8cd R12: ffff8801e9b74668 [ 541.051832] R13: ffff8801e9b74760 R14: ffff8801e9b74528 R15: ffff8801e9b74530 [ 541.053263] FS: 00007f4662bdf840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 541.054891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 541.056039] CR2: 000000000175c568 CR3: 00000001dcfe6000 CR4: 00000000000006e0 [ 541.058506] ================================================================== [ 541.059991] BUG: KASAN: stack-out-of-bounds in update_stack_state+0x38c/0x3e0 [ 541.061513] Read of size 8 at addr ffff8801e34a7970 by task umount/1305 [ 541.063302] CPU: 1 PID: 1305 Comm: umount Tainted: G D 4.18.0-rc1+ #4 [ 541.064838] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 541.066778] Call Trace: [ 541.067294] dump_stack+0x7b/0xb5 [ 541.067986] print_address_description+0x70/0x290 [ 541.068941] kasan_report+0x291/0x390 [ 541.069692] ? update_stack_state+0x38c/0x3e0 [ 541.070598] __asan_load8+0x54/0x90 [ 541.071315] update_stack_state+0x38c/0x3e0 [ 541.072172] ? __read_once_size_nocheck.constprop.7+0x20/0x20 [ 541.073340] ? vprintk_func+0x27/0x60 [ 541.074096] ? printk+0xa3/0xd3 [ 541.074762] ? __save_stack_trace+0x5e/0x100 [ 541.075634] unwind_next_frame.part.5+0x18e/0x490 [ 541.076594] ? unwind_dump+0x290/0x290 [ 541.077368] ? __show_regs+0x2c4/0x330 [ 541.078142] __unwind_start+0x106/0x190 [ 541.085422] __save_stack_trace+0x5e/0x100 [ 541.086268] ? __save_stack_trace+0x5e/0x100 [ 541.087161] ? unlink_anon_vmas+0xba/0x2c0 [ 541.087997] save_stack_trace+0x1f/0x30 [ 541.088782] save_stack+0x46/0xd0 [ 541.089475] ? __alloc_pages_slowpath+0x1420/0x1420 [ 541.090477] ? flush_tlb_mm_range+0x15e/0x220 [ 541.091364] ? __dec_node_state+0x24/0xb0 [ 541.092180] ? lock_page_memcg+0x85/0xf0 [ 541.092979] ? unlock_page_memcg+0x16/0x80 [ 541.093812] ? page_remove_rmap+0x198/0x520 [ 541.094674] ? mark_page_accessed+0x133/0x200 [ 541.095559] ? _cond_resched+0x1a/0x50 [ 541.096326] ? unmap_page_range+0xcd4/0xe50 [ 541.097179] ? rb_next+0x58/0x80 [ 541.097845] ? rb_next+0x58/0x80 [ 541.098518] __kasan_slab_free+0x13c/0x1a0 [ 541.099352] ? unlink_anon_vmas+0xba/0x2c0 [ 541.100184] kasan_slab_free+0xe/0x10 [ 541.100934] kmem_cache_free+0x89/0x1e0 [ 541.101724] unlink_anon_vmas+0xba/0x2c0 [ 541.102534] free_pgtables+0x101/0x1b0 [ 541.103299] exit_mmap+0x146/0x2a0 [ 541.103996] ? __ia32_sys_munmap+0x50/0x50 [ 541.104829] ? kasan_check_read+0x11/0x20 [ 541.105649] ? mm_update_next_owner+0x322/0x380 [ 541.106578] mmput+0x8b/0x1d0 [ 541.107191] do_exit+0x43a/0x1390 [ 541.107876] ? mm_update_next_owner+0x380/0x380 [ 541.108791] ? deactivate_super+0x5e/0x80 [ 541.109610] ? cleanup_mnt+0x61/0xa0 [ 541.110351] ? __cleanup_mnt+0x12/0x20 [ 541.111115] ? task_work_run+0xc8/0xf0 [ 541.111879] ? exit_to_usermode_loop+0x125/0x130 [ 541.112817] rewind_stack_do_exit+0x17/0x20 [ 541.113666] RIP: 0033:0x7f46624bf487 [ 541.114404] Code: Bad RIP value. [ 541.115094] RSP: 002b:00007fff5e12e9a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 541.116605] RAX: 0000000000000000 RBX: 0000000001753030 RCX: 00007f46624bf487 [ 541.118034] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000000000175a1e0 [ 541.119472] RBP: 000000000175a1e0 R08: 0000000000000000 R09: 0000000000000014 [ 541.120890] R10: 00000000000006b2 R11: 0000000000000246 R12: 00007f46629c883c [ 541.122321] R13: 0000000000000000 R14: 0000000001753210 R15: 00007fff5e12ec30 [ 541.124061] The buggy address belongs to the page: [ 541.125042] page:ffffea00078d29c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 541.126651] flags: 0x2ffff0000000000() [ 541.127418] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 541.128963] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 541.130516] page dumped because: kasan: bad access detected [ 541.131954] Memory state around the buggy address: [ 541.132924] ffff8801e34a7800: 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 00 [ 541.134378] ffff8801e34a7880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 541.135814] >ffff8801e34a7900: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 [ 541.137253] ^ [ 541.138637] ffff8801e34a7980: f1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 541.140075] ffff8801e34a7a00: 00 00 00 00 00 00 00 00 f3 00 00 00 00 00 00 00 [ 541.141509] ================================================================== - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/inode.c#L512 BUG_ON(inode->i_data.nrpages); The root cause is root directory inode is corrupted, it has both inline_data and inline_dentry flag, and its nlink is zero, so in ->evict(), after dropping all page cache, it grabs page #0 for inline data truncation, result in panic in later clear_inode() where we will check inode->i_data.nrpages value. This patch adds inline flags check in sanity_check_inode, in addition, do sanity check with root inode's nlink. Reported-by Wen Xu <wen.xu@gatech.edu> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

commit 3e1a127 upstream. When we disable hotplugging on the GPU, we need to be able to synchronize with each connector's hotplug interrupt handler before the interrupt is finally disabled. This can be a problem however, since nouveau_connector_detect() currently grabs a runtime power reference when handling connector probing. This will deadlock the runtime suspend handler like so: [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds. [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.486332] kworker/0:2 D 0 61 2 0x80000000 [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau] [ 861.487737] Call Trace: [ 861.488394] __schedule+0x322/0xaf0 [ 861.489070] schedule+0x33/0x90 [ 861.489744] rpm_resume+0x19c/0x850 [ 861.490392] ? finish_wait+0x90/0x90 [ 861.491068] __pm_runtime_resume+0x4e/0x90 [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau] [ 861.492416] process_one_work+0x231/0x620 [ 861.493068] worker_thread+0x44/0x3a0 [ 861.493722] kthread+0x12b/0x150 [ 861.494342] ? wq_pool_ids_show+0x140/0x140 [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.495648] ret_from_fork+0x3a/0x50 [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds. [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.498341] kworker/6:2 D 0 320 2 0x80000080 [ 861.499045] Workqueue: pm pm_runtime_work [ 861.499739] Call Trace: [ 861.500428] __schedule+0x322/0xaf0 [ 861.501134] ? wait_for_completion+0x104/0x190 [ 861.501851] schedule+0x33/0x90 [ 861.502564] schedule_timeout+0x3a5/0x590 [ 861.503284] ? mark_held_locks+0x58/0x80 [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40 [ 861.504710] ? wait_for_completion+0x104/0x190 [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190 [ 861.506136] ? wait_for_completion+0x104/0x190 [ 861.506845] wait_for_completion+0x12c/0x190 [ 861.507555] ? wake_up_q+0x80/0x80 [ 861.508268] flush_work+0x1c9/0x280 [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau] [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau] [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau] [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau] [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau] [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180 [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.514897] __rpm_callback+0x7a/0x1d0 [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.516313] rpm_callback+0x24/0x80 [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.517741] rpm_suspend+0x142/0x6b0 [ 861.518449] pm_runtime_work+0x97/0xc0 [ 861.519144] process_one_work+0x231/0x620 [ 861.519831] worker_thread+0x44/0x3a0 [ 861.520522] kthread+0x12b/0x150 [ 861.521220] ? wq_pool_ids_show+0x140/0x140 [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.522622] ret_from_fork+0x3a/0x50 [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds. [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000 [ 861.526073] Workqueue: events nvif_notify_work [nouveau] [ 861.526751] Call Trace: [ 861.527411] __schedule+0x322/0xaf0 [ 861.528089] schedule+0x33/0x90 [ 861.528758] rpm_resume+0x19c/0x850 [ 861.529399] ? finish_wait+0x90/0x90 [ 861.530073] __pm_runtime_resume+0x4e/0x90 [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau] [ 861.531459] ? ww_mutex_lock+0x47/0x80 [ 861.532097] ? ww_mutex_lock+0x47/0x80 [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm] [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper] [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper] [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau] [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau] [ 861.536221] process_one_work+0x231/0x620 [ 861.536994] worker_thread+0x44/0x3a0 [ 861.537757] kthread+0x12b/0x150 [ 861.538463] ? wq_pool_ids_show+0x140/0x140 [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.539815] ret_from_fork+0x3a/0x50 [ 861.540521] Showing all locks held in the system: [ 861.541696] 2 locks held by kworker/0:2/61: [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543814] 1 lock held by khungtaskd/64: [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 861.545160] 3 locks held by kworker/6:2/320: [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau] [ 861.548146] 1 lock held by dmesg/983: [ 861.548889] 2 locks held by zsh/1250: [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 861.551122] 6 locks held by kworker/6:0/1329: [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.552765] #1: 00000000ddb499ad ((work_completion)(&notify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper] [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper] [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper] [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm] [ 861.557864] ============================================= [ 861.559507] NMI backtrace for cpu 2 [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 861.561948] Call Trace: [ 861.562757] dump_stack+0x8e/0xd3 [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42 [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20 [ 861.566558] watchdog+0x316/0x580 [ 861.567355] kthread+0x12b/0x150 [ 861.568114] ? reset_hung_task_detector+0x20/0x20 [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.569598] ret_from_fork+0x3a/0x50 [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7: [ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120 [ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120 [ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120 [ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120 [ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120 [ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120 [ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120 [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks So: fix this by making it so that normal hotplug handling /only/ happens so long as the GPU is currently awake without any pending runtime PM requests. In the event that a hotplug occurs while the device is suspending or resuming, we can simply defer our response until the GPU is fully runtime resumed again. Changes since v4: - Use a new trick I came up with using pm_runtime_get() instead of the hackish junk we had before Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 764baba upstream. Commit 31747ed ("ovl: hash directory inodes for fsnotify") fixed an issue of inotify watch on directory that stops getting events after dropping dentry caches. A similar issue exists for non-dir non-upper files, for example: $ mkdir -p lower upper work merged $ touch lower/foo $ mount -t overlay -o lowerdir=lower,workdir=work,upperdir=upper none merged $ inotifywait merged/foo & $ echo 2 > /proc/sys/vm/drop_caches $ cat merged/foo inotifywait doesn't get the OPEN event, because ovl_lookup() called from 'cat' allocates a new overlay inode and does not reuse the watched inode. Fix this by hashing non-dir overlay inodes by lower real inode in the following cases that were not hashed before this change: - A non-upper overlay mount - A lower non-hardlink when index=off A helper ovl_hash_bylower() was added to put all the logic and documentation about which real inode an overlay inode is hashed by into one place. The issue dates back to initial version of overlayfs, but this patch depends on ovl_inode code that was introduced in kernel v4.13. Cc: <stable@vger.kernel.org> #v4.13 Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Mark Salyzyn <salyzyn@android.com> #4.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…_values fails [ Upstream commit 7915919 ] Fixes a use-after-free reported by KASAN when later iscsi_target_login_sess_out gets called and it tries to access conn->sess->se_sess: Disabling lock debugging due to kernel taint iSCSI Login timeout on Network Portal [::]:3260 iSCSI Login negotiation failed. ================================================================== BUG: KASAN: use-after-free in iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980 CPU: 1 PID: 980 Comm: iscsi_np Tainted: G O 4.17.8kasan.sess.connops+ #4 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod] ? __sched_text_start+0x8/0x8 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] ? __kthread_parkme+0xcc/0x100 ? parse_args.cold.14+0xd3/0xd3 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Allocated by task 980: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0x112/0x210 iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 980: __kasan_slab_free+0x125/0x170 kfree+0x90/0x1d0 iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 The buggy address belongs to the object at ffff880109d06f00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 456 bytes inside of 512-byte region [ffff880109d06f00, ffff880109d07100) The buggy address belongs to the page: page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 flags: 0x17fffc000008100(slab|head) raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> [rebased against idr/ida changes and to handle ret review comments from Matthew] Signed-off-by: Mike Christie <mchristi@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 018349d ] When netvsc device is removed it can call reschedule in RCU context. This happens because canceling the subchannel setup work could (in theory) cause a reschedule when manipulating the timer. To reproduce, run with lockdep enabled kernel and unbind a network device from hv_netvsc (via sysfs). [ 160.682011] WARNING: suspicious RCU usage [ 160.707466] 4.19.0-rc3-uio+ #2 Not tainted [ 160.709937] ----------------------------- [ 160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 160.723691] [ 160.723691] other info that might help us debug this: [ 160.723691] [ 160.730955] [ 160.730955] rcu_scheduler_active = 2, debug_locks = 1 [ 160.762813] 5 locks held by rebind-eth.sh/1812: [ 160.766851] #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0 [ 160.773416] #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0 [ 160.783766] #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0 [ 160.787465] #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250 [ 160.816987] #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.828629] [ 160.828629] stack backtrace: [ 160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2 [ 160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [ 160.832952] Call Trace: [ 160.832952] dump_stack+0x85/0xcb [ 160.832952] ___might_sleep+0x1a3/0x240 [ 160.832952] __flush_work+0x57/0x2e0 [ 160.832952] ? __mutex_lock+0x83/0x990 [ 160.832952] ? __kernfs_remove+0x24f/0x2e0 [ 160.832952] ? __kernfs_remove+0x1b2/0x2e0 [ 160.832952] ? mark_held_locks+0x50/0x80 [ 160.832952] ? get_work_pool+0x90/0x90 [ 160.832952] __cancel_work_timer+0x13c/0x1e0 [ 160.832952] ? netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.832952] ? __lock_is_held+0x55/0x90 [ 160.832952] netvsc_remove+0x9a/0x250 [hv_netvsc] [ 160.832952] vmbus_remove+0x26/0x30 [ 160.832952] device_release_driver_internal+0x18a/0x250 [ 160.832952] unbind_store+0xb4/0x180 [ 160.832952] kernfs_fop_write+0x113/0x1a0 [ 160.832952] __vfs_write+0x36/0x1a0 [ 160.832952] ? rcu_read_lock_sched_held+0x6b/0x80 [ 160.832952] ? rcu_sync_lockdep_assert+0x2e/0x60 [ 160.832952] ? __sb_start_write+0x141/0x1a0 [ 160.832952] ? vfs_write+0x184/0x1b0 [ 160.832952] vfs_write+0xbe/0x1b0 [ 160.832952] ksys_write+0x55/0xc0 [ 160.832952] do_syscall_64+0x60/0x1b0 [ 160.832952] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 160.832952] RIP: 0033:0x7fe48f4c8154 Resolve this by getting RTNL earlier. This is safe because the subchannel work queue does trylock on RTNL and will detect the race. Fixes: 7b2ee50 ("hv_netvsc: common detach logic") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Intel VT-d driver was reworked to use common deferred flushing implementation. Previously there was one global per-cpu flush queue, afterwards - one per domain. Before deferring a flush, the queue should be allocated and initialized. Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush queue. It's probably worth to init it for static or unmanaged domains too, but it may be arguable - I'm leaving it to iommu folks. Prevent queuing an iova flush if the domain doesn't have a queue. The defensive check seems to be worth to keep even if queue would be initialized for all kinds of domains. And is easy backportable. On 4.19.43 stable kernel it has a user-visible effect: previously for devices in si domain there were crashes, on sata devices: BUG: spinlock bad magic on CPU#6, swapper/0/1 lock: 0xffff88844f582008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 linaro-swg#1 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x45/0x115 intel_unmap+0x107/0x113 intel_unmap_sg+0x6b/0x76 __ata_qc_complete+0x7f/0x103 ata_qc_complete+0x9b/0x26a ata_qc_complete_multiple+0xd0/0xe3 ahci_handle_port_interrupt+0x3ee/0x48a ahci_handle_port_intr+0x73/0xa9 ahci_single_level_irq_intr+0x40/0x60 __handle_irq_event_percpu+0x7f/0x19a handle_irq_event_percpu+0x32/0x72 handle_irq_event+0x38/0x56 handle_edge_irq+0x102/0x121 handle_irq+0x147/0x15c do_IRQ+0x66/0xf2 common_interrupt+0xf/0xf RIP: 0010:__do_softirq+0x8c/0x2df The same for usb devices that use ehci-pci: BUG: spinlock bad magic on CPU#0, swapper/0/1 lock: 0xffff88844f402008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 linaro-swg#4 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x77/0x145 intel_unmap+0x107/0x113 intel_unmap_page+0xe/0x10 usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d usb_hcd_unmap_urb_for_dma+0x17/0x100 unmap_urb_for_dma+0x22/0x24 __usb_hcd_giveback_urb+0x51/0xc3 usb_giveback_urb_bh+0x97/0xde tasklet_action_common.isra.4+0x5f/0xa1 tasklet_action+0x2d/0x30 __do_softirq+0x138/0x2df irq_exit+0x7d/0x8b smp_apic_timer_interrupt+0x10f/0x151 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39 Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Cc: <stable@vger.kernel.org> # 4.14+ Fixes: 13cf017 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>

Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [linaro-swg#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ linaro-swg#4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de>

The base value in do_div() called by hpet_time_div() is truncated from unsigned long to uint32_t, resulting in a divide-by-zero exception. UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2 division by zero CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ linaro-swg#4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0 Call Trace: [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline] [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline] [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline] [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline] [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline] [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613 [<ffffffff82846003>] tracesys_phase2+0x90/0x95 The main C reproducer autogenerated by syzkaller, syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); memcpy((void*)0x20000100, "/dev/hpet\000", 10); syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0); syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000); Fix it by using div64_ul(). Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Zhang HongJun <zhanghongjun2@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use per_cpu_ptr_to_phys() instead of virt_to_phys() for per-cpu address conversion. In xen_starting_cpu(), per-cpu xen_vcpu_info address is converted to gfn by virt_to_gfn() macro. However, since the virt_to_gfn(v) assumes the given virtual address is in linear mapped kernel memory area, it can not convert the per-cpu memory if it is allocated on vmalloc area. This depends on CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK. If it is enabled, the first chunk of percpu memory is linear mapped. In the other case, that is allocated from vmalloc area. Moreover, if the first chunk of percpu has run out until allocating xen_vcpu_info, it will be allocated on the 2nd chunk, which is based on kernel memory or vmalloc memory (depends on CONFIG_NEED_PER_CPU_KM). Without this fix and kernel configured to use vmalloc area for the percpu memory, the Dom0 kernel will fail to boot with following errors. [ 0.466172] Xen: initializing cpu0 [ 0.469601] ------------[ cut here ]------------ [ 0.474295] WARNING: CPU: 0 PID: 1 at arch/arm64/xen/../../arm/xen/enlighten.c:153 xen_starting_cpu+0x160/0x180 [ 0.484435] Modules linked in: [ 0.487565] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #4 [ 0.493895] Hardware name: Socionext Developer Box (DT) [ 0.499194] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.504836] pc : xen_starting_cpu+0x160/0x180 [ 0.509263] lr : xen_starting_cpu+0xb0/0x180 [ 0.513599] sp : ffff8000116cbb60 [ 0.516984] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.522366] x27: 0000000000000000 x26: 0000000000000000 [ 0.527754] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.533129] x23: 0000000000000000 x22: 0000000000000000 [ 0.538511] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.543892] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.549274] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.554655] x15: ffffffffffffffff x14: 0720072007200720 [ 0.560037] x13: 0720072007200720 x12: 0720072007200720 [ 0.565418] x11: 0720072007200720 x10: 0720072007200720 [ 0.570801] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.576182] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.581564] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.586945] x3 : 0000000000000000 x2 : ffff80000abec000 [ 0.592327] x1 : 000000000000002f x0 : 0000800000000000 [ 0.597716] Call trace: [ 0.600232] xen_starting_cpu+0x160/0x180 [ 0.604309] cpuhp_invoke_callback+0xac/0x640 [ 0.608736] cpuhp_issue_call+0xf4/0x150 [ 0.612728] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.618030] __cpuhp_setup_state+0x84/0xf8 [ 0.622192] xen_guest_init+0x324/0x364 [ 0.626097] do_one_initcall+0x54/0x250 [ 0.630003] kernel_init_freeable+0x12c/0x2c8 [ 0.634428] kernel_init+0x1c/0x128 [ 0.637988] ret_from_fork+0x10/0x18 [ 0.641635] ---[ end trace d95b5309a33f8b27 ]--- [ 0.646337] ------------[ cut here ]------------ [ 0.651005] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:158! [ 0.657697] Internal error: Oops - BUG: 0 [#1] SMP [ 0.662548] Modules linked in: [ 0.665676] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 5.9.0-rc4+ #4 [ 0.673398] Hardware name: Socionext Developer Box (DT) [ 0.678695] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) [ 0.684338] pc : xen_starting_cpu+0x178/0x180 [ 0.688765] lr : xen_starting_cpu+0x144/0x180 [ 0.693188] sp : ffff8000116cbb60 [ 0.696573] x29: ffff8000116cbb60 x28: ffff80000abec000 [ 0.701955] x27: 0000000000000000 x26: 0000000000000000 [ 0.707344] x25: ffff80001156c000 x24: fffffdffbfcdb600 [ 0.712718] x23: 0000000000000000 x22: 0000000000000000 [ 0.718107] x21: ffff8000113a99c8 x20: ffff800010fe4f68 [ 0.723481] x19: ffff8000113a9988 x18: 0000000000000010 [ 0.728863] x17: 0000000094fe0f81 x16: 00000000deadbeef [ 0.734245] x15: ffffffffffffffff x14: 0720072007200720 [ 0.739626] x13: 0720072007200720 x12: 0720072007200720 [ 0.745008] x11: 0720072007200720 x10: 0720072007200720 [ 0.750390] x9 : ffff8000100fbdc0 x8 : ffff800010715208 [ 0.755771] x7 : 0000000000000054 x6 : ffff00001b790f00 [ 0.761153] x5 : ffff800010bbf880 x4 : 0000000000000000 [ 0.766534] x3 : 0000000000000000 x2 : 00000000deadbeef [ 0.771916] x1 : 00000000deadbeef x0 : ffffffffffffffea [ 0.777304] Call trace: [ 0.779819] xen_starting_cpu+0x178/0x180 [ 0.783898] cpuhp_invoke_callback+0xac/0x640 [ 0.788325] cpuhp_issue_call+0xf4/0x150 [ 0.792317] __cpuhp_setup_state_cpuslocked+0x128/0x2c8 [ 0.797619] __cpuhp_setup_state+0x84/0xf8 [ 0.801779] xen_guest_init+0x324/0x364 [ 0.805683] do_one_initcall+0x54/0x250 [ 0.809590] kernel_init_freeable+0x12c/0x2c8 [ 0.814016] kernel_init+0x1c/0x128 [ 0.817583] ret_from_fork+0x10/0x18 [ 0.821226] Code: d0006980 f9427c00 cb000300 17ffffea (d4210000) [ 0.827415] ---[ end trace d95b5309a33f8b28 ]--- [ 0.832076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.839815] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/160196697165.60224.17470743378683334995.stgit@devnote2 Signed-off-by: Juergen Gross <jgross@suse.com>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 linaro-swg#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 linaro-swg#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 linaro-swg#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 linaro-swg#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 linaro-swg#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 linaro-swg#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 linaro-swg#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 linaro-swg#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 linaro-swg#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 linaro-swg#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 linaro-swg#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 linaro-swg#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 linaro-swg#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 linaro-swg#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 linaro-swg#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 linaro-swg#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 linaro-swg#17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 linaro-swg#1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> linaro-swg#1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] linaro-swg#1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] linaro-swg#2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] linaro-swg#3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] linaro-swg#4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] linaro-swg#5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f linaro-swg#1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 linaro-swg#2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee linaro-swg#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 linaro-swg#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 linaro-swg#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c linaro-swg#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] linaro-swg#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] linaro-swg#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f linaro-swg#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 linaro-swg#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] linaro-swg#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc linaro-swg#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] linaro-swg#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] linaro-swg#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] linaro-swg#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] linaro-swg#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 linaro-swg#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] linaro-swg#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] linaro-swg#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 linaro-swg#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

… place apply_alternatives() treats alternatives with the ALT_FLAG_NOT flag set special as it optimizes the existing NOPs in place. Unfortunately, this happens with interrupts enabled and does not provide any form of core synchronization. So an interrupt hitting in the middle of the update and using the affected code path will observe a half updated NOP and crash and burn. The following 3 NOP sequence was observed to expose this crash halfway reliably under QEMU 32bit: 0x90 0x90 0x90 which is replaced by the optimized 3 byte NOP: 0x8d 0x76 0x00 So an interrupt can observe: 1) 0x90 0x90 0x90 nop nop nop 2) 0x8d 0x90 0x90 undefined 3) 0x8d 0x76 0x90 lea -0x70(%esi),%esi 4) 0x8d 0x76 0x00 lea 0x0(%esi),%esi Where only #1 and #4 are true NOPs. The same problem exists for 64bit obviously. Disable interrupts around this NOP optimization and invoke sync_core() before re-enabling them. Fixes: 270a69c ("x86/alternative: Support relocations in alternatives") Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com

Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ torvalds#532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ torvalds#532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Sachin reported a warning when running the inject-ra-err selftest: # selftests: powerpc/mce: inject-ra-err Disabling lock debugging due to kernel taint MCE: CPU19: machine check (Severe) Real address Load/Store (foreign/control memory) [Not recovered] MCE: CPU19: PID: 5254 Comm: inject-ra-err NIP: [0000000010000e48] MCE: CPU19: Initiator CPU MCE: CPU19: Unknown ------------[ cut here ]------------ WARNING: CPU: 19 PID: 5254 at arch/powerpc/mm/book3s64/radix_tlb.c:1221 radix__tlb_flush+0x160/0x180 CPU: 19 PID: 5254 Comm: inject-ra-err Kdump: loaded Tainted: G M E 6.6.0-rc3-00055-g9ed22ae6be81 linaro-swg#4 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1030.20 (NH1030_058) hv:phyp pSeries ... NIP radix__tlb_flush+0x160/0x180 LR radix__tlb_flush+0x104/0x180 Call Trace: radix__tlb_flush+0xf4/0x180 (unreliable) tlb_finish_mmu+0x15c/0x1e0 exit_mmap+0x1a0/0x510 __mmput+0x60/0x1e0 exit_mm+0xdc/0x170 do_exit+0x2bc/0x5a0 do_group_exit+0x4c/0xc0 sys_exit_group+0x28/0x30 system_call_exception+0x138/0x330 system_call_vectored_common+0x15c/0x2ec And bisected it to commit e43c0a0 ("powerpc/64s/radix: combine final TLB flush and lazy tlb mm shootdown IPIs"), which added a warning in radix__tlb_flush() if mm->context.copros is still elevated. However it's possible for the copros count to be elevated if a process exits without first closing file descriptors that are associated with a copro, eg. VAS. If the process exits with a VAS file still open, the release callback is queued up for exit_task_work() via: exit_files() put_files_struct() close_files() filp_close() fput() And called via: exit_task_work() ____fput() __fput() file->f_op->release(inode, file) coproc_release() vas_user_win_ops->close_win() vas_deallocate_window() mm_context_remove_vas_window() mm_context_remove_copro() But that is after exit_mm() has been called from do_exit() and triggered the warning. Fix it by dropping the warning, and always calling __flush_all_mm(). In the normal case of no copros, that will result in a call to _tlbiel_pid(mm->context.id, RIC_FLUSH_ALL) just as the current code does. If the copros count is elevated then it will cause a global flush, which should flush translations from any copros. Note that the process table entry was cleared in arch_exit_mmap(), so copros should not be able to fetch any new translations. Fixes: e43c0a0 ("powerpc/64s/radix: combine final TLB flush and lazy tlb mm shootdown IPIs") Reported-by: Sachin Sant <sachinp@linux.ibm.com> Closes: https://lore.kernel.org/all/A8E52547-4BF1-47CE-8AEA-BC5A9D7E3567@linux.ibm.com/ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Link: https://msgid.link/20231017121527.1574104-1-mpe@ellerman.id.au

jenswi-linaro reviewed Apr 27, 2016
View reviewed changes

jforissier force-pushed the one-supplicant branch from 52890a9 to 04dd390 Compare April 29, 2016 07:32

ghost merged commit 04dd390 into linaro-swg:optee_v9 Apr 29, 2016

This pull request was closed.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

optee: make sure privileged device can be open only once #4

optee: make sure privileged device can be open only once #4

jforissier commented Apr 27, 2016

jforissier commented Apr 27, 2016

jenswi-linaro Apr 27, 2016

jenswi-linaro Apr 27, 2016

jenswi-linaro commented Apr 27, 2016

jforissier commented Apr 27, 2016

jenswi-linaro commented Apr 27, 2016

jforissier commented Apr 27, 2016

jforissier commented Apr 27, 2016

jenswi-linaro commented Apr 27, 2016

pascal-brand38 commented Apr 28, 2016

jforissier commented Apr 28, 2016

jenswi-linaro commented Apr 28, 2016

pascal-brand38 commented Apr 29, 2016

jforissier commented Apr 29, 2016

optee: make sure privileged device can be open only once #4

optee: make sure privileged device can be open only once #4

Conversation

jforissier commented Apr 27, 2016

jforissier commented Apr 27, 2016

jenswi-linaro Apr 27, 2016

Choose a reason for hiding this comment

jenswi-linaro Apr 27, 2016

Choose a reason for hiding this comment

jenswi-linaro commented Apr 27, 2016

jforissier commented Apr 27, 2016

jenswi-linaro commented Apr 27, 2016

jforissier commented Apr 27, 2016

jforissier commented Apr 27, 2016

jenswi-linaro commented Apr 27, 2016

pascal-brand38 commented Apr 28, 2016

jforissier commented Apr 28, 2016

jenswi-linaro commented Apr 28, 2016

pascal-brand38 commented Apr 29, 2016

jforissier commented Apr 29, 2016