MT8173-EVB: Changes to support the new generic driver #3

jbech-linaro · 2016-04-01T13:11:39Z

No description provided.

pascal-brand38 · 2016-04-01T13:20:41Z

Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

Signed-off-by: Joakim Bech <joakim.bech@linaro.org> Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

From the commit below, the mt8173-evb failed to boot to console due to changes in the mt8173 device tree files. commit c0d6fe2 Merge: b44a3d2 3e4dda7 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Tue Nov 10 15:06:26 2015 -0800 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Until properly solved, let's just remove the section in the device tree blob that causes this. Signed-off-by: Joakim Bech <joakim.bech@linaro.org> Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

jbech-linaro · 2016-04-01T13:27:02Z

Tag has been applied, ready to be merged.

commit 3d5fe03 upstream. We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ec183d2 upstream. Fixes segmentation fault using, for instance: (gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64 [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410 (gdb) bt #0 0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410 #1 0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:433 #2 0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:498 #3 0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:936 #4 0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391 #5 0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361 #6 0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401 #7 0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253 #8 0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364 #9 0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664 #10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539 #11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264 #12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390 #13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451 #14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495 #15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618 (gdb) Intel PT attempts to find the sched:sched_switch tracepoint but that seg faults if tracefs is not readable, because the error reporting structure is null, as errors are not reported when automatically adding tracepoints. Fix by checking before using. Committer note: This doesn't take place in a kernel that supports perf_event_attr.context_switch, that is the default way that will be used for tracking context switches, only in older kernels, like 4.2, in a machine with Intel PT (e.g. Broadwell) for non-priviledged users. Further info from a similar patch by Wang: The error is in tracepoint_error: it assumes the 'e' parameter is valid. However, there are many situation a parse_event() can be called without parse_events_error. See result of $ grep 'parse_events(.*NULL)' ./tools/perf/ -r' Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Tong Zhang <ztong@vt.edu> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 1965817 ("perf tools: Enhance parsing events tracepoint error output") Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 361cad3 upstream. We've seen this in a packet capture - I've intermixed what I think was going on. The fix here is to grab the so_lock sooner. 1964379 -> #1 open (for write) reply seqid=1 1964393 -> #2 open (for read) reply seqid=2 __nfs4_close(), state->n_wronly-- nfs4_state_set_mode_locked(), changes state->state = [R] state->flags is [RW] state->state is [R], state->n_wronly == 0, state->n_rdonly == 1 1964398 -> #3 open (for write) call -> because close is already running 1964399 -> downgrade (to read) call seqid=2 (close of #1) 1964402 -> #3 open (for write) reply seqid=3 __update_open_stateid() nfs_set_open_stateid_locked(), changes state->flags state->flags is [RW] state->state is [R], state->n_wronly == 0, state->n_rdonly == 1 new sequence number is exposed now via nfs4_stateid_copy() next step would be update_open_stateflags(), pending so_lock 1964403 -> downgrade reply seqid=2, fails with OLD_STATEID (close of #1) nfs4_close_prepare() gets so_lock and recalcs flags -> send close 1964405 -> downgrade (to read) call seqid=3 (close of #1 retry) __update_open_stateid() gets so_lock * update_open_stateflags() updates state->n_wronly. nfs4_state_set_mode_locked() updates state->state state->flags is [RW] state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1 * should have suppressed the preceding nfs4_close_prepare() from sending open_downgrade 1964406 -> write call 1964408 -> downgrade (to read) reply seqid=4 (close of #1 retry) nfs_clear_open_stateid_locked() state->flags is [R] state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1 1964409 -> write reply (fails, openmode) Signed-off-by: Andrew Elble <aweits@rit.edu> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7716682 ] Ilya reported following lockdep splat: kernel: ========================= kernel: [ BUG: held lock freed! ] kernel: 4.5.0-rc1-ceph-00026-g5e0a311 #1 Not tainted kernel: ------------------------- kernel: swapper/5/0 is freeing memory ffff880035c9d200-ffff880035c9dbff, with a lock still held there! kernel: (&(&queue->rskq_lock)->rlock){+.-...}, at: [<ffffffff816f6a88>] inet_csk_reqsk_queue_add+0x28/0xa0 kernel: 4 locks held by swapper/5/0: kernel: #0: (rcu_read_lock){......}, at: [<ffffffff8169ef6b>] netif_receive_skb_internal+0x4b/0x1f0 kernel: #1: (rcu_read_lock){......}, at: [<ffffffff816e977f>] ip_local_deliver_finish+0x3f/0x380 kernel: #2: (slock-AF_INET){+.-...}, at: [<ffffffff81685ffb>] sk_clone_lock+0x19b/0x440 kernel: #3: (&(&queue->rskq_lock)->rlock){+.-...}, at: [<ffffffff816f6a88>] inet_csk_reqsk_queue_add+0x28/0xa0 To properly fix this issue, inet_csk_reqsk_queue_add() needs to return to its callers if the child as been queued into accept queue. We also need to make sure listener is still there before calling sk->sk_data_ready(), by holding a reference on it, since the reference carried by the child can disappear as soon as the child is put on accept queue. Reported-by: Ilya Dryomov <idryomov@gmail.com> Fixes: ebb516a ("tcp/dccp: fix race at listener dismantle phase") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 09dc9cd upstream. The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0 [1750924.568035] [<ffffffff811bd214>] vfs_write+0xb4/0x1f0 [1750924.568035] [<ffffffff811bdc49>] SyS_write+0x49/0xa0 [1750924.568035] [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 <f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP <ffff88007af1dd70> [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d144dfe upstream. If we use USB ID pin as wakeup source, and there is a USB block device on this USB OTG (ID) cable, the system will be deadlock after system resume. The root cause for this problem is: the workqueue ci_otg may try to remove hcd before the driver resume has finished, and hcd will disconnect the device on it, then, it will call device_release_driver, and holds the device lock "dev->mutex", but it is never unlocked since it waits workqueue writeback to run to flush the block information, but the workqueue writeback is freezable, it is not thawed before driver resume has finished. When the driver (device: sd 0:0:0:0:) resume goes to dpm_complete, it tries to get its device lock "dev->mutex", but it can't get it forever, then the deadlock occurs. Below call stacks show the situation. So, in order to fix this problem, we need to change workqueue ci_otg as freezable, then the work item in this workqueue will be run after driver's resume, this workqueue will not be blocked forever like above case since the workqueue writeback has been thawed too. Tested at: i.mx6qdl-sabresd and i.mx6sx-sdb. [ 555.178869] kworker/u2:13 D c07de74c 0 826 2 0x00000000 [ 555.185310] Workqueue: ci_otg ci_otg_work [ 555.189353] Backtrace: [ 555.191849] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0) [ 555.198912] r10:ee471ba0 r9:00000000 r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 [ 555.206867] r4:ee470000 [ 555.209453] [<c07dec24>] (schedule) from [<c07e2fc4>] (schedule_timeout+0x15c/0x1e0) [ 555.217212] r4:7fffffff r3:edc2b000 [ 555.220862] [<c07e2e68>] (schedule_timeout) from [<c07df6c8>] (wait_for_common+0x94/0x144) [ 555.229140] r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 r4:7fffffff [ 555.235980] [<c07df634>] (wait_for_common) from [<c07df790>] (wait_for_completion+0x18/0x1c) [ 555.244430] r10:00000001 r9:c0b5563c r8:c0042e48 r7:ef086000 r6:eea4372c r5:ef131b00 [ 555.252383] r4:00000000 [ 555.254970] [<c07df778>] (wait_for_completion) from [<c0043cb8>] (flush_work+0x19c/0x234) [ 555.263177] [<c0043b1c>] (flush_work) from [<c0043fac>] (flush_delayed_work+0x48/0x4c) [ 555.271106] r8:ed5b5000 r7:c0b38a3c r6:eea439cc r5:eea4372c r4:eea4372c [ 555.277958] [<c0043f64>] (flush_delayed_work) from [<c00eae18>] (bdi_unregister+0x84/0xec) [ 555.286236] r4:eea43520 r3:20000153 [ 555.289885] [<c00ead94>] (bdi_unregister) from [<c02c2154>] (blk_cleanup_queue+0x180/0x29c) [ 555.298250] r5:eea43808 r4:eea43400 [ 555.301909] [<c02c1fd4>] (blk_cleanup_queue) from [<c0417914>] (__scsi_remove_device+0x48/0xb8) [ 555.310623] r7:00000000 r6:20000153 r5:ededa950 r4:ededa800 [ 555.316403] [<c04178cc>] (__scsi_remove_device) from [<c0415e90>] (scsi_forget_host+0x64/0x68) [ 555.325028] r5:ededa800 r4:ed5b5000 [ 555.328689] [<c0415e2c>] (scsi_forget_host) from [<c0409828>] (scsi_remove_host+0x78/0x104) [ 555.337054] r5:ed5b5068 r4:ed5b5000 [ 555.340709] [<c04097b0>] (scsi_remove_host) from [<c04cdfcc>] (usb_stor_disconnect+0x50/0xb4) [ 555.349247] r6:ed5b56e4 r5:ed5b5818 r4:ed5b5690 r3:00000008 [ 555.355025] [<c04cdf7c>] (usb_stor_disconnect) from [<c04b3bc8>] (usb_unbind_interface+0x78/0x25c) [ 555.363997] r8:c13919b4 r7:edd3c000 r6:edd3c020 r5:ee551c68 r4:ee551c00 r3:c04cdf7c [ 555.371892] [<c04b3b50>] (usb_unbind_interface) from [<c03dc248>] (__device_release_driver+0x8c/0x118) [ 555.381213] r10:00000001 r9:edd90c00 r8:c13919b4 r7:ee551c68 r6:c0b546e0 r5:c0b5563c [ 555.389167] r4:edd3c020 [ 555.391752] [<c03dc1bc>] (__device_release_driver) from [<c03dc2fc>] (device_release_driver+0x28/0x34) [ 555.401071] r5:edd3c020 r4:edd3c054 [ 555.404721] [<c03dc2d4>] (device_release_driver) from [<c03db304>] (bus_remove_device+0xe0/0x110) [ 555.413607] r5:edd3c020 r4:ef17f04c [ 555.417253] [<c03db224>] (bus_remove_device) from [<c03d8128>] (device_del+0x114/0x21c) [ 555.425270] r6:edd3c028 r5:edd3c020 r4:ee551c00 r3:00000000 [ 555.431045] [<c03d8014>] (device_del) from [<c04b1560>] (usb_disable_device+0xa4/0x1e8) [ 555.439061] r8:edd3c000 r7:eded8000 r6:00000000 r5:00000001 r4:ee551c00 [ 555.445906] [<c04b14bc>] (usb_disable_device) from [<c04a8e54>] (usb_disconnect+0x74/0x224) [ 555.454271] r9:edd90c00 r8:ee551000 r7:ee551c68 r6:ee551c9c r5:ee551c00 r4:00000001 [ 555.462156] [<c04a8de0>] (usb_disconnect) from [<c04a8fb8>] (usb_disconnect+0x1d8/0x224) [ 555.470259] r10:00000001 r9:edd90000 r8:ee471e2c r7:ee551468 r6:ee55149c r5:ee551400 [ 555.478213] r4:00000001 [ 555.480797] [<c04a8de0>] (usb_disconnect) from [<c04ae5ec>] (usb_remove_hcd+0xa0/0x1ac) [ 555.488813] r10:00000001 r9:ee471eb0 r8:00000000 r7:ef3d9500 r6:eded810c r5:eded80b0 [ 555.496765] r4:eded8000 [ 555.499351] [<c04ae54c>] (usb_remove_hcd) from [<c04d4158>] (host_stop+0x28/0x64) [ 555.506847] r6:eeb50010 r5:eded8000 r4:eeb51010 [ 555.511563] [<c04d4130>] (host_stop) from [<c04d09b8>] (ci_otg_work+0xc4/0x124) [ 555.518885] r6:00000001 r5:eeb50010 r4:eeb502a0 r3:c04d4130 [ 555.524665] [<c04d08f4>] (ci_otg_work) from [<c00454f0>] (process_one_work+0x194/0x420) [ 555.532682] r6:ef086000 r5:eeb502a0 r4:edc44480 [ 555.537393] [<c004535c>] (process_one_work) from [<c00457b0>] (worker_thread+0x34/0x514) [ 555.545496] r10:edc44480 r9:ef086000 r8:c0b1a100 r7:ef086034 r6:00000088 r5:edc44498 [ 555.553450] r4:ef086000 [ 555.556032] [<c004577c>] (worker_thread) from [<c004bab4>] (kthread+0xdc/0xf8) [ 555.563268] r10:00000000 r9:00000000 r8:00000000 r7:c004577c r6:edc44480 r5:eddc15c0 [ 555.571221] r4:00000000 [ 555.573804] [<c004b9d8>] (kthread) from [<c000fef0>] (ret_from_fork+0x14/0x24) [ 555.581040] r7:00000000 r6:00000000 r5:c004b9d8 r4:eddc15c0 [ 553.429383] sh D c07de74c 0 694 691 0x00000000 [ 553.435801] Backtrace: [ 553.438295] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0) [ 553.445358] r10:edd3c054 r9:edd3c078 r8:edddbd50 r7:edcbbc00 r6:c1377c34 r5:60000153 [ 553.453313] r4:eddda000 [ 553.455896] [<c07dec24>] (schedule) from [<c07deff8>] (schedule_preempt_disabled+0x10/0x14) [ 553.464261] r4:edd3c058 r3:0000000a [ 553.467910] [<c07defe8>] (schedule_preempt_disabled) from [<c07e0bbc>] (mutex_lock_nested+0x1a0/0x3e8) [ 553.477254] [<c07e0a1c>] (mutex_lock_nested) from [<c03e927c>] (dpm_complete+0xc0/0x1b0) [ 553.485358] r10:00561408 r9:edd3c054 r8:c0b4863c r7:edddbd90 r6:c0b485d8 r5:edd3c020 [ 553.493313] r4:edd3c0d0 [ 553.495896] [<c03e91bc>] (dpm_complete) from [<c03e9388>] (dpm_resume_end+0x1c/0x20) [ 553.503652] r9:00000000 r8:c0b1a9d0 r7:c1334ec0 r6:c1334edc r5:00000003 r4:00000010 [ 553.511544] [<c03e936c>] (dpm_resume_end) from [<c0079894>] (suspend_devices_and_enter+0x158/0x504) [ 553.520604] r4:00000000 r3:c1334efc [ 553.524250] [<c007973c>] (suspend_devices_and_enter) from [<c0079e74>] (pm_suspend+0x234/0x2cc) [ 553.532961] r10:00561408 r9:ed6b7300 r8:00000004 r7:c1334eec r6:00000000 r5:c1334ee8 [ 553.540914] r4:00000003 [ 553.543493] [<c0079c40>] (pm_suspend) from [<c0078a6c>] (state_store+0x6c/0xc0) [ 555.703684] 7 locks held by kworker/u2:13/826: [ 555.708140] #0: ("%s""ci_otg"){++++.+}, at: [<c0045484>] process_one_work+0x128/0x420 [ 555.716277] #1: ((&ci->work)){+.+.+.}, at: [<c0045484>] process_one_work+0x128/0x420 [ 555.724317] #2: (usb_bus_list_lock){+.+.+.}, at: [<c04ae5e4>] usb_remove_hcd+0x98/0x1ac [ 555.732626] #3: (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224 [ 555.740403] #4: (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224 [ 555.748179] #5: (&dev->mutex){......}, at: [<c03dc2f4>] device_release_driver+0x20/0x34 [ 555.756487] #6: (&shost->scan_mutex){+.+.+.}, at: [<c04097d0>] scsi_remove_host+0x20/0x104 Cc: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Guillaume Nault says: ==================== l2tp: fixes for l2tp_ip and l2tp_ip6 socket handling This series addresses problems found while working on commit 32c2311 ("l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind()"). The first three patches fix races in socket's connect, recv and bind operations. The last two ones fix scenarios where l2tp fails to correctly lookup its userspace sockets. Apart from the last patch, which is l2tp_ip6 specific, every patch fixes the same problem in the L2TP IPv4 and IPv6 code. All problems fixed by this series exist since the creation of the l2tp_ip and l2tp_ip6 modules. Changes since v1: * Patch linaro-swg#3: fix possible uninitialised use of 'ret' in l2tp_ip_bind(). ==================== Acked-by: James Chapman <jchapman@katalix.com>

Since commit: 4bcc595 ("printk: reinstate KERN_CONT for printing continuation lines") printk() requires KERN_CONT to continue log messages. Lots of printk() in lockdep.c and print_ip_sym() don't have it. As the result lockdep reports are completely messed up. Add missing KERN_CONT and inline print_ip_sym() where necessary. Example of a messed up report: 0-rc5+ linaro-swg#41 Not tainted ------------------------------------------------------- syz-executor0/5036 is trying to acquire lock: ( rtnl_mutex ){+.+.+.} , at: [<ffffffff86b3d6ac>] rtnl_lock+0x1c/0x20 but task is already holding lock: ( &net->packet.sklist_lock ){+.+...} , at: [<ffffffff873541a6>] packet_diag_dump+0x1a6/0x1920 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> linaro-swg#3 ( &net->packet.sklist_lock +.+...} ... Without this patch all scripts that parse kernel bug reports are broken. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andreyknvl@google.com Cc: aryabinin@virtuozzo.com Cc: joe@perches.com Cc: syzkaller@googlegroups.com Link: http://lkml.kernel.org/r/1480343083-48731-1-git-send-email-dvyukov@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

commit 40a50f8 upstream. TPS65217 IRQ domain should be removed and initialised as NULL when the module is unloaded for the next use. When tps65217.ko is loaded again, it causes the page fault. This patch fixes the error below. root@arm:~# lsmod | grep "tps" tps65217_charger 3538 0 tps65218_pwrbutton 2974 0 tps65217 6710 1 tps65217_charger root@arm:~# modprobe -r tps65217_charger root@arm:~# modprobe tps65217.ko [ 71.990277] Unable to handle kernel paging request at virtual address bf055944 [ 71.998063] pgd = dd3a4000 [ 72.000904] [bf055944] *pgd=9e6f7811, *pte=00000000, *ppte=00000000 [ 72.007567] Internal error: Oops: 7 [#1] SMP ARM [ 72.012404] Modules linked in: tps65217(+) evdev musb_dsps musb_hdrc udc_core tps65218_pwrbutton usbcore phy_am335] [ 72.055700] CPU: 0 PID: 243 Comm: modprobe Not tainted 4.9.0-rc5-next-20161114 #3 [ 72.063531] Hardware name: Generic AM33XX (Flattened Device Tree) [ 72.069899] task: de714380 task.stack: de7e6000 [ 72.074655] PC is at irq_find_matching_fwspec+0x88/0x100 [ 72.080211] LR is at 0xde7e79d8 [ 72.083496] pc : [<c01a5d88>] lr : [<de7e79d8>] psr: 200e0013 [ 72.083496] sp : de7e7a78 ip : 00000000 fp : dd138a68 [ 72.095506] r10: c0ca04f8 r9 : 00000018 r8 : de7e7ab8 [ 72.100973] r7 : 00000001 r6 : c0c4517c r5 : df963f68 r4 : de321980 [ 72.107797] r3 : bf055940 r2 : de714380 r1 : 00000000 r0 : 00000000 [ 72.114633] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 72.122084] Control: 10c5387d Table: 9d3a4019 DAC: 00000051 [ 72.128097] Process modprobe (pid: 243, stack limit = 0xde7e6218) [ 72.134489] Stack: (0xde7e7a78 to 0xde7e8000) [ 72.139060] 7a60: df963f68 de7e7ab8 [ 72.147643] 7a80: 00000000 dd0e1000 dd491e20 c01a6ea0 600e0013 c01a5dc0 dd138a68 c0c45138 [ 72.156216] 7aa0: df963f68 00000000 df963f68 dd0e1010 00000000 c01a71a4 df963f68 00000001 [ 72.164800] 7ac0: 00000002 de7e7ac0 c80048b8 dd0adf00 df963f68 c0c4517c 00000000 de7e7b50 [ 72.173369] 7ae0: 00000018 c0ca04f8 dd138a68 c01a5dc0 df963f68 dd0e1010 00000000 dd0e1000 [ 72.181942] 7b00: dd491e20 c0653a70 df963f58 00000001 00000002 00000000 00000000 00000000 [ 72.190522] 7b20: 600e0093 c0cbf8f0 c0c0512c c0193674 00000001 00000080 00000000 c0554984 [ 72.199096] 7b40: 00000000 00000000 800e0013 c0553858 df963f68 00000000 00000000 00000000 [ 72.207674] 7b60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 72.216239] 7b80: 00000000 00000000 00000000 00000000 00000000 00000000 dd0e1000 c0544d24 [ 72.224816] 7ba0: dd491e10 dd0e1010 dd16e800 bf1d517c bf1d5620 dd0e1010 c1497ed4 bf1d5620 [ 72.233398] 7bc0: dd0e1010 fffffdfb bf1d5620 bf1d5620 00000000 c054537c c0545330 dd0e1010 [ 72.241967] 7be0: c1497ed4 00000000 bf1d5620 c05433ac 00000000 00000000 de7e7c28 c0543570 [ 72.250537] 7c00: 00000001 c1497e90 00000000 c0541884 de080cd4 dd44b7d4 dd0e1010 dd0e1010 [ 72.259109] 7c20: dd0e1044 c05430c8 dd0e1010 00000001 dd0e1010 dd0e1018 dd0e1010 c0c9e328 [ 72.267676] 7c40: de5d4020 c0542760 dd0e1018 dd0e1010 00000000 c0540ba8 dd138a40 c048dec4 [ 72.276253] 7c60: 00000000 dd0e1000 00000001 dd0e1000 dd0e1010 dd0e1000 bf233de0 dd138a40 [ 72.284829] 7c80: dd0e1010 c05450a0 000000bf 00000000 dd138a60 00000001 dd0e1000 c0571240 [ 72.293398] 7ca0: 00000000 dd1ce9c0 00000040 dd1ce9cc bf233de0 00000003 de5d4020 ffffffff [ 72.301969] 7cc0: 00000004 dd0adf00 00000000 c057140 00000000 00000000 dd0adf00 de5d4020 [ 72.310543] 7ce0: c057146c dd1ce9c0 bf233d14 de5d4020 de7fb3d0 00000004 bf233d14 ffffffff [ 72.319120] 7d00: 00000018 dd49bf30 c01cedc0 c05714d0 00000000 00000000 dd0adf00 de322810 [ 72.327692] 7d20: de322810 00000000 dd033000 000000f0 00000001 bf2333fc 00000000 00000000 [ 72.336269] 7d40: dd0adf00 de5d4020 000000b6 bf233e4 de5d4020 bf233968 de5d4004 de5d4000 [ 72.344848] 7d60: bf233314 c06148ac de5d4020 c1497ed4 00000000 bf233e4 00000000 c05433ac [ 72.353422] 7d80: 00000000 de5d4020 bf233e4 de5d4054 00000000 bf236000 00000000 c0543538 [ 72.362002] 7da0: 00000000 bf233e4 c0543484 c05417e4 de1442a4 de5d04d0 bf233e4 de321300 [ 72.370582] 7dc0: c0caa5a4 c05429fc bf233be0 bf233e4 c0cbfa44 bf233e4 c0cbfa44 dd2f7740 [ 72.379148] 7de0: bf233f00 c05442f0 bf233e8c bf233e24 c0cbfa44 c0615ae0 00000000 bf233f00 [ 72.387718] 7e00: c0cbfa44 c010186c 200f0013 c0191650 de714380 00000000 600f0013 00000040 [ 72.396286] 7e20: dd2f7740 c018f1ac 00000001 c0c8356c 024000c0 c01a8854 c0c56e0e c028225c [ 72.404863] 7e40: dd2f7740 c0191984 de714380 dd2f7740 00000001 bf233f00 bf233f00 c0cbfa44 [ 72.413440] 7e60: dd2f7740 bf233f00 00000001 dd49bf08 dd49bf30 c0230998 00000001 c0c8356c [ 72.421997] 7e80: c0c4c536 c0cbfa44 c0c0512c c01d2070 bf233f0c 00007fff bf233f00 c01cf5b8 [ 72.430570] 7ea0: 00000000 c1475134 c01cee34 bf23411c bf233f48 bf234054 bf234150 00000000 [ 72.439144] 7ec0: 024002c2 de7fbf40 0009bc20 c02776ac ff800000 00000000 00000000 bf233670 [ 72.447723] 7ee0: 00000004 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 72.456298] 7f00: 00000000 00000000 00000000 00000000 c01d2590 0000aa41 00000000 00000000 [ 72.464862] 7f20: 000b2549 e12c3a41 00000051 de7e6000 0009bc20 c01d2630 00000530 e12b9000 [ 72.473438] 7f40: 0000aa41 e12c1434 e12c1211 e12c336c 00001150 00001620 00000000 00000000 [ 72.482003] 7f60: 00000000 000010fc 00000035 00000036 0000001d 0000001a 00000017 00000000 [ 72.490564] 7f80: de7e6000 3ba39a00 0009b008 0009b718 00000080 c0107704 de7e6000 00000000 [ 72.499141] 7fa0: 0009f609 c0107560 3ba39a00 0009b008 000a7b08 0000aa41 0009bc20 0000aa41 [ 72.507717] 7fc0: 3ba39a00 0009b008 0009b718 00000080 00000001 00000008 0009ab14 0009f609 [ 72.516290] 7fe0: bea31ab8 bea31aa8 0001e5eb b6e83b42 800f0030 000a7b08 0000ffff 0840ffff [ 72.524883] [<c01a5d88>] (irq_find_matching_fwspec) from [<c01a6ea0>] (irq_create_fwspec_mapping+0x28/0x2e0) [ 72.535174] [<c01a6ea0>] (irq_create_fwspec_mapping) from [<c01a71a4>] (irq_create_of_mapping+0x4c/0x54) [ 72.545115] [<c01a71a4>] (irq_create_of_mapping) from [<c0653a70>] (of_irq_get+0x58/0x68) [ 72.553699] [<c0653a70>] (of_irq_get) from [<c0544d24>] (platform_get_irq+0x1c/0xec) [ 72.561828] [<c0544d24>] (platform_get_irq) from [<bf1d517c>] (tps6521x_pb_probe+0xd0/0x1a8 [tps65218_pwrbutton]) [ 72.572581] [<bf1d517c>] (tps6521x_pb_probe [tps65218_pwrbutton]) from [<c054537c>] (platform_drv_probe+0x4c/0xac) [ 72.583426] [<c054537c>] (platform_drv_probe) from [<c05433ac>] (driver_probe_device+0x204/0x2dc) [ 72.592729] [<c05433ac>] (driver_probe_device) from [<c0541884>] (bus_for_each_drv+0x58/0x8c) [ 72.601657] [<c0541884>] (bus_for_each_drv) from [<c05430c8>] (__device_attach+0xb0/0x114) [ 72.610324] [<c05430c8>] (__device_attach) from [<c0542760>] (bus_probe_device+0x88/0x90) [ 72.618898] [<c0542760>] (bus_probe_device) from [<c0540ba8>] (device_add+0x3b8/0x560) [ 72.627203] [<c0540ba8>] (device_add) from [<c05450a0>] (platform_device_add+0xa8/0x208) [ 72.635693] [<c05450a0>] (platform_device_add) from [<c0571240>] (mfd_add_device+0x240/0x338) [ 72.644634] [<c0571240>] (mfd_add_device) from [<c0571408>] (mfd_add_devices+0xa0/0x104) [ 72.653120] [<c0571408>] (mfd_add_devices) from [<c05714d0>] (devm_mfd_add_devices+0x60/0xa8) [ 72.662077] [<c05714d0>] (devm_mfd_add_devices) from [<bf2333fc>] (tps65217_probe+0xe8/0x2ec [tps65217]) [ 72.672026] [<bf2333fc>] (tps65217_probe [tps65217]) from [<c06148ac>] (i2c_device_probe+0x168/0x1f4) [ 72.681695] [<c06148ac>] (i2c_device_probe) from [<c05433ac>] (driver_probe_device+0x204/0x2dc) [ 72.690816] [<c05433ac>] (driver_probe_device) from [<c0543538>] (__driver_attach+0xb4/0xb8) [ 72.699657] [<c0543538>] (__driver_attach) from [<c05417e4>] (bus_for_each_dev+0x60/0x94) [ 72.708224] [<c05417e4>] (bus_for_each_dev) from [<c05429fc>] (bus_add_driver+0x18c/0x214) [ 72.716892] [<c05429fc>] (bus_add_driver) from [<c05442f0>] (driver_register+0x78/0xf8) [ 72.725280] [<c05442f0>] (driver_register) from [<c0615ae0>] (i2c_register_driver+0x38/0x80) [ 72.734120] [<c0615ae0>] (i2c_register_driver) from [<c010186c>] (do_one_initcall+0x3c/0x178) [ 72.743055] [<c010186c>] (do_one_initcall) from [<c0230998>] (do_init_module+0x5c/0x1d0) [ 72.751537] [<c0230998>] (do_init_module) from [<c01d2070>] (load_module+0x1d10/0x21c0) [ 72.759933] [<c01d2070>] (load_module) from [<c01d2630>] (SyS_init_module+0x110/0x154) [ 72.768242] [<c01d2630>] (SyS_init_module) from [<c0107560>] (ret_fast_syscall+0x0/0x1c) [ 72.776725] Code: e5944000 e1540006 0a00001b e594300c (e593c004) [ 72.783181] ---[ end trace 0278ec325f4689b8 ]--- Fixes: 6556bda ("mfd: tps65217: Add support for IRQs") Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 546d87e upstream. Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 IP: _raw_spin_lock+0xc/0x30 PGD 3e28eb067 PUD 3f0ac6067 PMD 0 Oops: 0002 [#1] SMP CPU: 0 PID: 2431 Comm: test Tainted: G OE 4.10.0-rc1+ #3 Call Trace: ? kvm_ioapic_scan_entry+0x3e/0x110 [kvm] kvm_arch_vcpu_ioctl_run+0x10a8/0x15f0 [kvm] ? pick_next_task_fair+0xe1/0x4e0 ? kvm_arch_vcpu_load+0xea/0x260 [kvm] kvm_vcpu_ioctl+0x33a/0x600 [kvm] ? hrtimer_try_to_cancel+0x29/0x130 ? do_nanosleep+0x97/0xf0 do_vfs_ioctl+0xa1/0x5d0 ? __hrtimer_init+0x90/0x90 ? do_nanosleep+0x5b/0xf0 SyS_ioctl+0x79/0x90 do_syscall_64+0x6e/0x180 entry_SYSCALL64_slow_path+0x25/0x25 RIP: _raw_spin_lock+0xc/0x30 RSP: ffffa43688973cc0 The syzkaller folks reported a NULL pointer dereference due to ENABLE_CAP succeeding even without an irqchip. The Hyper-V synthetic interrupt controller is activated, resulting in a wrong request to rescan the ioapic and a NULL pointer dereference. #include <sys/ioctl.h> #include <sys/mman.h> #include <sys/types.h> #include <linux/kvm.h> #include <pthread.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #ifndef KVM_CAP_HYPERV_SYNIC #define KVM_CAP_HYPERV_SYNIC 123 #endif void* thr(void* arg) { struct kvm_enable_cap cap; cap.flags = 0; cap.cap = KVM_CAP_HYPERV_SYNIC; ioctl((long)arg, KVM_ENABLE_CAP, &cap); return 0; } int main() { void *host_mem = mmap(0, 0x1000, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); int kvmfd = open("/dev/kvm", 0); int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0); struct kvm_userspace_memory_region memreg; memreg.slot = 0; memreg.flags = 0; memreg.guest_phys_addr = 0; memreg.memory_size = 0x1000; memreg.userspace_addr = (unsigned long)host_mem; host_mem[0] = 0xf4; ioctl(vmfd, KVM_SET_USER_MEMORY_REGION, &memreg); int cpufd = ioctl(vmfd, KVM_CREATE_VCPU, 0); struct kvm_sregs sregs; ioctl(cpufd, KVM_GET_SREGS, &sregs); sregs.cr0 = 0; sregs.cr4 = 0; sregs.efer = 0; sregs.cs.selector = 0; sregs.cs.base = 0; ioctl(cpufd, KVM_SET_SREGS, &sregs); struct kvm_regs regs = { .rflags = 2 }; ioctl(cpufd, KVM_SET_REGS, &regs); ioctl(vmfd, KVM_CREATE_IRQCHIP, 0); pthread_t th; pthread_create(&th, 0, thr, (void*)(long)cpufd); usleep(rand() % 10000); ioctl(cpufd, KVM_RUN, 0); pthread_join(th, 0); return 0; } This patch fixes it by failing ENABLE_CAP if without an irqchip. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 5c91941 (kvm/x86: Hyper-V synthetic interrupt controller) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The MMC hosts could be left in an unconsistent or uninitialized state from the firmware. Instead of assuming, the firmware did the right things, let's reset the host controllers. This change fixes a bug when the mmc2/sdio is initialized leading to a hung task: [ 242.704294] INFO: task kworker/7:1:675 blocked for more than 120 seconds. [ 242.711129] Not tainted 4.9.0-rc8-00017-gcf0251f #3 [ 242.716571] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 242.724435] kworker/7:1 D 0 675 2 0x00000000 [ 242.729973] Workqueue: events_freezable mmc_rescan [ 242.734796] Call trace: [ 242.737269] [<ffff00000808611c>] __switch_to+0xa8/0xb4 [ 242.742437] [<ffff000008d07c04>] __schedule+0x1c0/0x67c [ 242.747689] [<ffff000008d08254>] schedule+0x40/0xa0 [ 242.752594] [<ffff000008d0b284>] schedule_timeout+0x1c4/0x35c [ 242.758366] [<ffff000008d08e38>] wait_for_common+0xd0/0x15c [ 242.763964] [<ffff000008d09008>] wait_for_completion+0x28/0x34 [ 242.769825] [<ffff000008a1a9f4>] mmc_wait_for_req_done+0x40/0x124 [ 242.775949] [<ffff000008a1ab98>] mmc_wait_for_req+0xc0/0xf8 [ 242.781549] [<ffff000008a1ac3c>] mmc_wait_for_cmd+0x6c/0x84 [ 242.787149] [<ffff000008a26610>] mmc_io_rw_direct_host+0x9c/0x114 [ 242.793270] [<ffff000008a26aa0>] sdio_reset+0x34/0x7c [ 242.798347] [<ffff000008a1d46c>] mmc_rescan+0x2fc/0x360 [ ... ] Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> (upstream commit 0fbdf99) Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

commit cdea465 upstream. A vendor with a system having more than 128 CPUs occasionally encounters the following crash during shutdown. This is not an easily reproduceable event, but the vendor was able to provide the following analysis of the crash, which exhibits the same footprint each time. crash> bt PID: 0 TASK: ffff88017c70ce70 CPU: 5 COMMAND: "swapper/5" #0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b #1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2 #2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0 linaro-swg#3 [ffff88085c143c10] oops_end at ffffffff8168ef88 linaro-swg#4 [ffff88085c143c38] no_context at ffffffff8167ebb3 linaro-swg#5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49 linaro-swg#6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3 linaro-swg#7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e linaro-swg#8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5 linaro-swg#9 [ffff88085c143d70] page_fault at ffffffff8168e188 [exception RIP: unknown or invalid address] RIP: ffffffffa053c800 RSP: ffff88085c143e28 RFLAGS: 00010206 RAX: ffff88017c72bfd8 RBX: ffff88017a8dc000 RCX: ffff8810588b5ac8 RDX: ffff8810588b5a00 RSI: ffffffffa053c800 RDI: ffff8810588b5a00 RBP: ffff88085c143e58 R8: ffff88017c70d408 R9: ffff88017a8dc000 R10: 0000000000000002 R11: ffff88085c143da0 R12: ffff8810588b5ac8 R13: 0000000000000100 R14: ffffffffa053c800 R15: ffff8810588b5a00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <IRQ stack> [exception RIP: cpuidle_enter_state+82] RIP: ffffffff81514192 RSP: ffff88017c72be50 RFLAGS: 00000202 RAX: 0000001e4c3c6f16 RBX: 000000000000f8a0 RCX: 0000000000000018 RDX: 0000000225c17d03 RSI: ffff88017c72bfd8 RDI: 0000001e4c3c6f16 RBP: ffff88017c72be78 R8: 000000000000237e R9: 0000000000000018 R10: 0000000000002494 R11: 0000000000000001 R12: ffff88017c72be20 R13: ffff88085c14f8e0 R14: 0000000000000082 R15: 0000001e4c3bb400 ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018 This is the corresponding stack trace It has crashed because the area pointed with RIP extracted from timer element is already removed during a shutdown process. The function is smi_timeout(). And we think ffff8810588b5a00 in RDX is a parameter struct smi_info crash> rd ffff8810588b5a00 20 ffff8810588b5a00: ffff8810588b6000 0000000000000000 .`.X............ ffff8810588b5a10: ffff880853264400 ffffffffa05417e0 .D&S......T..... ffff8810588b5a20: 24a024a000000000 0000000000000000 .....$.$........ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a40: ffffffffa053a040 ffffffffa053a060 @.S.....`.S..... ffff8810588b5a50: 0000000000000000 0000000100000001 ................ ffff8810588b5a60: 0000000000000000 0000000000000e00 ................ ffff8810588b5a70: ffffffffa053a580 ffffffffa053a6e0 ..S.......S..... ffff8810588b5a80: ffffffffa053a4a0 ffffffffa053a250 ..S.....P.S..... ffff8810588b5a90: 0000000500000002 0000000000000000 ................ Unfortunately the top of this area is already detroyed by someone. But because of two reasonns we think this is struct smi_info 1) The address included in between ffff8810588b5a70 and ffff8810588b5a80: are inside of ipmi_si_intf.c see crash> module ffff88085779d2c0 2) We've found the area which point this. It is offset 0x68 of ffff880859df4000 crash> rd ffff880859df4000 100 ffff880859df4000: 0000000000000000 0000000000000001 ................ ffff880859df4010: ffffffffa0535290 dead000000000200 .RS............. ffff880859df4020: ffff880859df4020 ffff880859df4020 @.Y.... @.Y.... ffff880859df4030: 0000000000000002 0000000000100010 ................ ffff880859df4040: ffff880859df4040 ffff880859df4040 @@.Y....@@.Y.... ffff880859df4050: 0000000000000000 0000000000000000 ................ ffff880859df4060: 0000000000000000 ffff8810588b5a00 .........Z.X.... ffff880859df4070: 0000000000000001 ffff880859df4078 ........x@.Y.... If we regards it as struct ipmi_smi in shutdown process it looks consistent. The remedy for this apparent race is affixed below. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> This was first introduced in 7ea0ed2 ipmi: Make the message handler easier to use for SMI interfaces where some code was moved outside of the rcu_read_lock() and the lock was not added. Signed-off-by: Corey Minyard <cminyard@mvista.com>

commit 48fb6f4 upstream. Commit 65d8fc7 ("futex: Remove requirement for lock_page() in get_futex_key()") removed an unnecessary lock_page() with the side-effect that page->mapping needed to be treated very carefully. Two defensive warnings were added in case any assumption was missed and the first warning assumed a correct application would not alter a mapping backing a futex key. Since merging, it has not triggered for any unexpected case but Mark Rutland reported the following bug triggering due to the first warning. kernel BUG at kernel/futex.c:679! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 linaro-swg#3 Hardware name: linux,dummy-virt (DT) task: ffff80001e271780 task.stack: ffff000010908000 PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679 pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145 The fact that it's a bug instead of a warning was due to an unrelated arm64 problem, but the warning itself triggered because the underlying mapping changed. This is an application issue but from a kernel perspective it's a recoverable situation and the warning is unnecessary so this patch removes the warning. The warning may potentially be triggered with the following test program from Mark although it may be necessary to adjust NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the system. #include <linux/futex.h> #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/time.h> #include <unistd.h> #define NR_FUTEX_THREADS 16 pthread_t threads[NR_FUTEX_THREADS]; void *mem; #define MEM_PROT (PROT_READ | PROT_WRITE) #define MEM_SIZE 65536 static int futex_wrapper(int *uaddr, int op, int val, const struct timespec *timeout, int *uaddr2, int val3) { syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3); } void *poll_futex(void *unused) { for (;;) { futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1); } } int main(int argc, char *argv[]) { int i; mem = mmap(NULL, MEM_SIZE, MEM_PROT, MAP_SHARED | MAP_ANONYMOUS, -1, 0); printf("Mapping @ %p\n", mem); printf("Creating futex threads...\n"); for (i = 0; i < NR_FUTEX_THREADS; i++) pthread_create(&threads[i], NULL, poll_futex, NULL); printf("Flipping mapping...\n"); for (;;) { mmap(mem, MEM_SIZE, MEM_PROT, MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0); } return 0; } Reported-and-tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 120e9da ] syszkaller team reported another problem in DCCP [1] Problem here is that the structure holding RTO timer (ccid2_hc_tx_rto_expire() handler) is freed too soon. We can not use del_timer_sync() to cancel the timer since this timer wants to grab socket lock (that would risk a dead lock) Solution is to defer the freeing of memory when all references to the socket were released. Socket timers do own a reference, so this should fix the issue. [1] ================================================================== BUG: KASAN: use-after-free in ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 Read of size 4 at addr ffff8801d2660540 by task kworker/u4:7/3365 CPU: 1 PID: 3365 Comm: kworker/u4:7 Not tainted 4.13.0-rc4+ linaro-swg#3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events_unbound call_usermodehelper_exec_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 call_timer_fn+0x233/0x830 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x7fd/0xb90 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:638 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:1044 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:702 RIP: 0010:arch_local_irq_enable arch/x86/include/asm/paravirt.h:824 [inline] RIP: 0010:__raw_write_unlock_irq include/linux/rwlock_api_smp.h:267 [inline] RIP: 0010:_raw_write_unlock_irq+0x56/0x70 kernel/locking/spinlock.c:343 RSP: 0018:ffff8801cd50eaa8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffffffff85a090c0 RCX: 0000000000000006 RDX: 1ffffffff0b595f3 RSI: 1ffff1003962f989 RDI: ffffffff85acaf98 RBP: ffff8801cd50eab0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801cc96ea60 R13: dffffc0000000000 R14: ffff8801cc96e4c0 R15: ffff8801cc96e4c0 </IRQ> release_task+0xe9e/0x1a40 kernel/exit.c:220 wait_task_zombie kernel/exit.c:1162 [inline] wait_consider_task+0x29b8/0x33c0 kernel/exit.c:1389 do_wait_thread kernel/exit.c:1452 [inline] do_wait+0x441/0xa90 kernel/exit.c:1523 kernel_wait4+0x1f5/0x370 kernel/exit.c:1665 SYSC_wait4+0x134/0x140 kernel/exit.c:1677 SyS_wait4+0x2c/0x40 kernel/exit.c:1673 call_usermodehelper_exec_sync kernel/kmod.c:286 [inline] call_usermodehelper_exec_work+0x1a0/0x2c0 kernel/kmod.c:323 process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2097 worker_thread+0x223/0x1860 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:425 Allocated by task 21267: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc+0x127/0x750 mm/slab.c:3561 ccid_new+0x20e/0x390 net/dccp/ccid.c:151 dccp_hdlr_ccid+0x27/0x140 net/dccp/feat.c:44 __dccp_feat_activate+0x142/0x2a0 net/dccp/feat.c:344 dccp_feat_activate_values+0x34e/0xa90 net/dccp/feat.c:1538 dccp_rcv_request_sent_state_process net/dccp/input.c:472 [inline] dccp_rcv_state_process+0xed1/0x1620 net/dccp/input.c:677 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __release_sock+0x124/0x360 net/core/sock.c:2269 release_sock+0xa4/0x2a0 net/core/sock.c:2784 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1642 SyS_connect+0x24/0x30 net/socket.c:1623 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3049: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 ccid_hc_tx_delete+0xc5/0x100 net/dccp/ccid.c:190 dccp_destroy_sock+0x1d1/0x2b0 net/dccp/proto.c:225 inet_csk_destroy_sock+0x166/0x3f0 net/ipv4/inet_connection_sock.c:833 dccp_done+0xb7/0xd0 net/dccp/proto.c:145 dccp_time_wait+0x13d/0x300 net/dccp/minisocks.c:72 dccp_rcv_reset+0x1d1/0x5b0 net/dccp/input.c:160 dccp_rcv_state_process+0x8fc/0x1620 net/dccp/input.c:663 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __sk_receive_skb+0x33e/0xc00 net/core/sock.c:521 dccp_v4_rcv+0xef1/0x1c00 net/dccp/ipv4.c:871 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x19af/0x33d0 net/core/dev.c:4417 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4455 process_backlog+0x203/0x740 net/core/dev.c:5130 napi_poll net/core/dev.c:5527 [inline] net_rx_action+0x792/0x1910 net/core/dev.c:5593 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 The buggy address belongs to the object at ffff8801d2660100 which belongs to the cache ccid2_hc_tx_sock of size 1240 The buggy address is located 1088 bytes inside of 1240-byte region [ffff8801d2660100, ffff8801d26605d8) The buggy address belongs to the page: page:ffffea0007499800 count:1 mapcount:0 mapping:ffff8801d2660100 index:0x0 compound_mapcount: 0 flags: 0x200000000008100(slab|head) raw: 0200000000008100 ffff8801d2660100 0000000000000000 0000000100000005 raw: ffffea00075271a0 ffffea0007538820 ffff8801d3aef9c0 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d2660400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801d2660480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801d2660500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801d2660580: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff8801d2660600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Starting with LLVM r308050, clang generates a jump table with EL1 virtual addresses in __init_stage2_translation, which results in a kernel panic when booting at EL2: Kernel panic - not syncing: HYP panic: PS:800003c9 PC:ffff0000089e6fd8 ESR:86000004 FAR:ffff0000089e6fd8 HPFAR:0000000009825000 PAR:0000000000000000 VCPU:000804fc20001221 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-rc7-dirty #3 Hardware name: ARM Juno development board (r1) (DT) Call trace: [<ffff000008088ea4>] dump_backtrace+0x0/0x34c [<ffff000008089208>] show_stack+0x18/0x20 [<ffff0000089c73ec>] dump_stack+0xc4/0xfc [<ffff0000080c8e1c>] panic+0x138/0x2b4 [<ffff0000080c8ce4>] panic+0x0/0x2b4 SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-3,5 Kernel Offset: disabled CPU features: 0x002086 Memory Limit: none ---[ end Kernel panic - not syncing: HYP panic: PS:800003c9 PC:ffff0000089e6fd8 ESR:86000004 FAR:ffff0000089e6fd8 HPFAR:0000000009825000 PAR:0000000000000000 VCPU:000804fc20001221 This change adds -fno-jump-tables to arm64/hyp to work around the bug. Bug: 62093296 Bug: 67506682 Change-Id: I1257be1febdcbfcc886fe6183c698b7a98d2a153 (am from https://patchwork.kernel.org/patch/10060301/) Suggested-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit 4f4616c ] Similar to what we do when we remove a PCI function, set the QEDF_UNLOADING flag to prevent any requests from being queued while a vport is being deleted. This prevents any requests from getting stuck in limbo when the vport is unloaded or deleted. Fixes the crash: PID: 106676 TASK: ffff9a436aa90000 CPU: 12 COMMAND: "multipathd" #0 [ffff9a43567d3550] machine_kexec+522 at ffffffffaca60b2a #1 [ffff9a43567d35b0] __crash_kexec+114 at ffffffffacb13512 #2 [ffff9a43567d3680] crash_kexec+48 at ffffffffacb13600 #3 [ffff9a43567d3698] oops_end+168 at ffffffffad117768 #4 [ffff9a43567d36c0] no_context+645 at ffffffffad106f52 #5 [ffff9a43567d3710] __bad_area_nosemaphore+116 at ffffffffad106fe9 #6 [ffff9a43567d3760] bad_area+70 at ffffffffad107379 #7 [ffff9a43567d3788] __do_page_fault+1247 at ffffffffad11a8cf #8 [ffff9a43567d37f0] do_page_fault+53 at ffffffffad11a915 #9 [ffff9a43567d3820] page_fault+40 at ffffffffad116768 [exception RIP: qedf_init_task+61] RIP: ffffffffc0e13c2d RSP: ffff9a43567d38d0 RFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffbe920472c738 RCX: ffff9a434fa0e3e8 RDX: ffff9a434f695280 RSI: ffffbe920472c738 RDI: ffff9a43aa359c80 RBP: ffff9a43567d3950 R8: 0000000000000c15 R9: ffff9a3fb09b9880 R10: ffff9a434fa0e3e8 R11: ffff9a43567d35ce R12: 0000000000000000 R13: ffff9a434f695280 R14: ffff9a43aa359c80 R15: ffff9a3fb9e005c0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 89da619 upstream. Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e225042 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Huang Chong <huang.chong@zte.com.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…sfers [ Upstream commit d52e4d0 ] This bug happens only when the UDC needs to sleep during usb_ep_dequeue, as is the case for (at least) dwc3. [ 382.200896] BUG: scheduling while atomic: screen/1808/0x00000100 [ 382.207124] 4 locks held by screen/1808: [ 382.211266] #0: (rcu_callback){....}, at: [<c10b4ff0>] rcu_process_callbacks+0x260/0x440 [ 382.219949] #1: (rcu_read_lock_sched){....}, at: [<c1358ba0>] percpu_ref_switch_to_atomic_rcu+0xb0/0x130 [ 382.230034] #2: (&(&ctx->ctx_lock)->rlock){....}, at: [<c11f0c73>] free_ioctx_users+0x23/0xd0 [ 382.230096] #3: (&(&ffs->eps_lock)->rlock){....}, at: [<f81e7710>] ffs_aio_cancel+0x20/0x60 [usb_f_fs] [ 382.230160] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil intel_powerclamp coretemp dwc3 kvm_intel ulpi udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd gpio_keys usbcore basincove_gpadc industrialio usb_common [ 382.230407] CPU: 1 PID: 1808 Comm: screen Not tainted 4.14.0-edison+ #117 [ 382.230416] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 382.230425] Call Trace: [ 382.230438] <SOFTIRQ> [ 382.230466] dump_stack+0x47/0x62 [ 382.230498] __schedule_bug+0x61/0x80 [ 382.230522] __schedule+0x43/0x7a0 [ 382.230587] schedule+0x5f/0x70 [ 382.230625] dwc3_gadget_ep_dequeue+0x14c/0x270 [dwc3] [ 382.230669] ? do_wait_intr_irq+0x70/0x70 [ 382.230724] usb_ep_dequeue+0x19/0x90 [udc_core] [ 382.230770] ffs_aio_cancel+0x37/0x60 [usb_f_fs] [ 382.230798] kiocb_cancel+0x31/0x40 [ 382.230822] free_ioctx_users+0x4d/0xd0 [ 382.230858] percpu_ref_switch_to_atomic_rcu+0x10a/0x130 [ 382.230881] ? percpu_ref_exit+0x40/0x40 [ 382.230904] rcu_process_callbacks+0x2b3/0x440 [ 382.230965] __do_softirq+0xf8/0x26b [ 382.231011] ? __softirqentry_text_start+0x8/0x8 [ 382.231033] do_softirq_own_stack+0x22/0x30 [ 382.231042] </SOFTIRQ> [ 382.231071] irq_exit+0x45/0xc0 [ 382.231089] smp_apic_timer_interrupt+0x13c/0x150 [ 382.231118] apic_timer_interrupt+0x35/0x3c [ 382.231132] EIP: __copy_user_ll+0xe2/0xf0 [ 382.231142] EFLAGS: 00210293 CPU: 1 [ 382.231154] EAX: bfd4508c EBX: 00000004 ECX: 00000003 EDX: f3d8fe50 [ 382.231165] ESI: f3d8fe51 EDI: bfd4508d EBP: f3d8fe14 ESP: f3d8fe08 [ 382.231176] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 382.231265] core_sys_select+0x25f/0x320 [ 382.231346] ? __wake_up_common_lock+0x62/0x80 [ 382.231399] ? tty_ldisc_deref+0x13/0x20 [ 382.231438] ? ldsem_up_read+0x1b/0x40 [ 382.231459] ? tty_ldisc_deref+0x13/0x20 [ 382.231479] ? tty_write+0x29f/0x2e0 [ 382.231514] ? n_tty_ioctl+0xe0/0xe0 [ 382.231541] ? tty_write_unlock+0x30/0x30 [ 382.231566] ? __vfs_write+0x22/0x110 [ 382.231604] ? security_file_permission+0x2f/0xd0 [ 382.231635] ? rw_verify_area+0xac/0x120 [ 382.231677] ? vfs_write+0x103/0x180 [ 382.231711] SyS_select+0x87/0xc0 [ 382.231739] ? SyS_write+0x42/0x90 [ 382.231781] do_fast_syscall_32+0xd6/0x1a0 [ 382.231836] entry_SYSENTER_32+0x47/0x71 [ 382.231848] EIP: 0xb7f75b05 [ 382.231857] EFLAGS: 00000246 CPU: 1 [ 382.231868] EAX: ffffffda EBX: 00000400 ECX: bfd4508c EDX: bfd4510c [ 382.231878] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: bfd45020 [ 382.231889] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 382.232281] softirq: huh, entered softirq 9 RCU c10b4d90 with preempt_count 00000100, exited with 00000000? Tested-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <tycho@tycho.ws> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e04e7a7 ] This patch fixes the race between netvsc_probe() and rndis_set_subchannel(), which can cause a deadlock. These are the related 3 paths which show the deadlock: path #1: Workqueue: hv_vmbus_con vmbus_onmessage_work [hv_vmbus] Call Trace: schedule schedule_preempt_disabled __mutex_lock __device_attach bus_probe_device device_add vmbus_device_register vmbus_onoffer vmbus_onmessage_work process_one_work worker_thread kthread ret_from_fork path #2: schedule schedule_preempt_disabled __mutex_lock netvsc_probe vmbus_probe really_probe __driver_attach bus_for_each_dev driver_attach_async async_run_entry_fn process_one_work worker_thread kthread ret_from_fork path #3: Workqueue: events netvsc_subchan_work [hv_netvsc] Call Trace: schedule rndis_set_subchannel netvsc_subchan_work process_one_work worker_thread kthread ret_from_fork Before path #1 finishes, path #2 can start to run, because just before the "bus_probe_device(dev);" in device_add() in path #1, there is a line "object_uevent(&dev->kobj, KOBJ_ADD);", so systemd-udevd can immediately try to load hv_netvsc and hence path #2 can start to run. Next, path #2 offloads the subchannal's initialization to a workqueue, i.e. path #3, so we can end up in a deadlock situation like this: Path #2 gets the device lock, and is trying to get the rtnl lock; Path #3 gets the rtnl lock and is waiting for all the subchannel messages to be processed; Path #1 is trying to get the device lock, but since #2 is not releasing the device lock, path #1 has to sleep; since the VMBus messages are processed one by one, this means the sub-channel messages can't be procedded, so #3 has to sleep with the rtnl lock held, and finally #2 has to sleep... Now all the 3 paths are sleeping and we hit the deadlock. With the patch, we can make sure #2 gets both the device lock and the rtnl lock together, gets its job done, and releases the locks, so #1 and #3 will not be blocked for ever. Fixes: 8195b13 ("hv_netvsc: fix deadlock on hotplug") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5d407b0 upstream A kernel crash occurrs when defragmented packet is fragmented in ip_do_fragment(). In defragment routine, skb_orphan() is called and skb->ip_defrag_offset is set. but skb->sk and skb->ip_defrag_offset are same union member. so that frag->sk is not NULL. Hence crash occurrs in skb->sk check routine in ip_do_fragment() when defragmented packet is fragmented. test commands: %iptables -t nat -I POSTROUTING -j MASQUERADE %hping3 192.168.4.2 -s 1000 -p 2000 -d 60000 splat looks like: [ 261.069429] kernel BUG at net/ipv4/ip_output.c:636! [ 261.075753] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 261.083854] CPU: 1 PID: 1349 Comm: hping3 Not tainted 4.19.0-rc2+ #3 [ 261.100977] RIP: 0010:ip_do_fragment+0x1613/0x2600 [ 261.106945] Code: e8 e2 38 e3 fe 4c 8b 44 24 18 48 8b 74 24 08 e9 92 f6 ff ff 80 3c 02 00 0f 85 da 07 00 00 48 8b b5 d0 00 00 00 e9 25 f6 ff ff <0f> 0b 0f 0b 44 8b 54 24 58 4c 8b 4c 24 18 4c 8b 5c 24 60 4c 8b 6c [ 261.127015] RSP: 0018:ffff8801031cf2c0 EFLAGS: 00010202 [ 261.134156] RAX: 1ffff1002297537b RBX: ffffed0020639e6e RCX: 0000000000000004 [ 261.142156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880114ba9bd8 [ 261.150157] RBP: ffff880114ba8a40 R08: ffffed0022975395 R09: ffffed0022975395 [ 261.158157] R10: 0000000000000001 R11: ffffed0022975394 R12: ffff880114ba9ca4 [ 261.166159] R13: 0000000000000010 R14: ffff880114ba9bc0 R15: dffffc0000000000 [ 261.174169] FS: 00007fbae2199700(0000) GS:ffff88011b400000(0000) knlGS:0000000000000000 [ 261.183012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 261.189013] CR2: 00005579244fe000 CR3: 0000000119bf4000 CR4: 00000000001006e0 [ 261.198158] Call Trace: [ 261.199018] ? dst_output+0x180/0x180 [ 261.205011] ? save_trace+0x300/0x300 [ 261.209018] ? ip_copy_metadata+0xb00/0xb00 [ 261.213034] ? sched_clock_local+0xd4/0x140 [ 261.218158] ? kill_l4proto+0x120/0x120 [nf_conntrack] [ 261.223014] ? rt_cpu_seq_stop+0x10/0x10 [ 261.227014] ? find_held_lock+0x39/0x1c0 [ 261.233008] ip_finish_output+0x51d/0xb50 [ 261.237006] ? ip_fragment.constprop.56+0x220/0x220 [ 261.243011] ? nf_ct_l4proto_register_one+0x5b0/0x5b0 [nf_conntrack] [ 261.250152] ? rcu_is_watching+0x77/0x120 [ 261.255010] ? nf_nat_ipv4_out+0x1e/0x2b0 [nf_nat_ipv4] [ 261.261033] ? nf_hook_slow+0xb1/0x160 [ 261.265007] ip_output+0x1c7/0x710 [ 261.269005] ? ip_mc_output+0x13f0/0x13f0 [ 261.273002] ? __local_bh_enable_ip+0xe9/0x1b0 [ 261.278152] ? ip_fragment.constprop.56+0x220/0x220 [ 261.282996] ? nf_hook_slow+0xb1/0x160 [ 261.287007] raw_sendmsg+0x21f9/0x4420 [ 261.291008] ? dst_output+0x180/0x180 [ 261.297003] ? sched_clock_cpu+0x126/0x170 [ 261.301003] ? find_held_lock+0x39/0x1c0 [ 261.306155] ? stop_critical_timings+0x420/0x420 [ 261.311004] ? check_flags.part.36+0x450/0x450 [ 261.315005] ? _raw_spin_unlock_irq+0x29/0x40 [ 261.320995] ? _raw_spin_unlock_irq+0x29/0x40 [ 261.326142] ? cyc2ns_read_end+0x10/0x10 [ 261.330139] ? raw_bind+0x280/0x280 [ 261.334138] ? sched_clock_cpu+0x126/0x170 [ 261.338995] ? check_flags.part.36+0x450/0x450 [ 261.342991] ? __lock_acquire+0x4500/0x4500 [ 261.348994] ? inet_sendmsg+0x11c/0x500 [ 261.352989] ? dst_output+0x180/0x180 [ 261.357012] inet_sendmsg+0x11c/0x500 [ ... ] v2: - clear skb->sk at reassembly routine.(Eric Dumarzet) Fixes: fa0f527 ("ip: use rb trees for IP frag queue.") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 46b3722 ] We occasionaly hit following assert failure in 'perf top', when processing the /proc info in multiple threads. perf: ...include/linux/refcount.h:109: refcount_inc: Assertion `!(!refcount_inc_not_zero(r))' failed. The gdb backtrace looks like this: [Switching to Thread 0x7ffff11ba700 (LWP 13749)] 0x00007ffff50839fb in raise () from /lib64/libc.so.6 (gdb) #0 0x00007ffff50839fb in raise () from /lib64/libc.so.6 #1 0x00007ffff5085800 in abort () from /lib64/libc.so.6 #2 0x00007ffff507c0da in __assert_fail_base () from /lib64/libc.so.6 #3 0x00007ffff507c152 in __assert_fail () from /lib64/libc.so.6 #4 0x0000000000535373 in refcount_inc (r=0x7fffdc009be0) at ...include/linux/refcount.h:109 #5 0x00000000005354f1 in comm_str__get (cs=0x7fffdc009bc0) at util/comm.c:24 #6 0x00000000005356bd in __comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:72 #7 0x000000000053579e in comm_str__findnew (str=0x7fffd000b260 ":2", root=0xbed5c0 <comm_str_root>) at util/comm.c:95 #8 0x000000000053582e in comm__new (str=0x7fffd000b260 ":2", timestamp=0, exec=false) at util/comm.c:111 #9 0x00000000005363bc in thread__new (pid=2, tid=2) at util/thread.c:57 #10 0x0000000000523da0 in ____machine__findnew_thread (machine=0xbfde38, threads=0xbfdf28, pid=2, tid=2, create=true) at util/machine.c:457 #11 0x0000000000523eb4 in __machine__findnew_thread (machine=0xbfde38, ... The failing assertion is this one: REFCOUNT_WARN(!refcount_inc_not_zero(r), ... The problem is that we keep global comm_str_root list, which is accessed by multiple threads during the 'perf top' startup and following 2 paths can race: thread 1: ... thread__new comm__new comm_str__findnew down_write(&comm_str_lock); __comm_str__findnew comm_str__get thread 2: ... comm__override or comm__free comm_str__put refcount_dec_and_test down_write(&comm_str_lock); rb_erase(&cs->rb_node, &comm_str_root); Because thread 2 first decrements the refcnt and only after then it removes the struct comm_str from the list, the thread 1 can find this object on the list with refcnt equls to 0 and hit the assert. This patch fixes the thread 1 __comm_str__findnew path, by ignoring objects that already dropped the refcnt to 0. For the rest of the objects we take the refcnt before comparing its name and release it afterwards with comm_str__put, which can also release the object completely. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Lukasz Odzioba <lukasz.odzioba@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20180720101740.GA27176@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b71c69c ] Fixes this warning that was provoked by a pairing: [60258.016221] WARNING: possible recursive locking detected [60258.021558] 4.15.0-RD1812-BSP #1 Tainted: G O [60258.027146] -------------------------------------------- [60258.032464] kworker/u5:0/70 is trying to acquire lock: [60258.037609] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<87759073>] bt_accept_enqueue+0x3c/0x74 [60258.046863] [60258.046863] but task is already holding lock: [60258.052704] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.062905] [60258.062905] other info that might help us debug this: [60258.069441] Possible unsafe locking scenario: [60258.069441] [60258.075368] CPU0 [60258.077821] ---- [60258.080272] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.085510] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.090748] [60258.090748] *** DEADLOCK *** [60258.090748] [60258.096676] May be due to missing lock nesting notation [60258.096676] [60258.103472] 5 locks held by kworker/u5:0/70: [60258.107747] #0: ((wq_completion)%shdev->name#2){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.117263] #1: ((work_completion)(&hdev->rx_work)){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.126942] #2: (&conn->chan_lock){+.+.}, at: [<7877c8c3>] l2cap_connect+0x80/0x4f8 [60258.134806] #3: (&chan->lock/2){+.+.}, at: [<2e16c724>] l2cap_connect+0x8c/0x4f8 [60258.142410] #4: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.153043] [60258.153043] stack backtrace: [60258.157413] CPU: 1 PID: 70 Comm: kworker/u5:0 Tainted: G O 4.15.0-RD1812-BSP #1 [60258.165945] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [60258.172485] Workqueue: hci0 hci_rx_work [60258.176331] Backtrace: [60258.178797] [<8010c9fc>] (dump_backtrace) from [<8010ccbc>] (show_stack+0x18/0x1c) [60258.186379] r7:80e55fe4 r6:80e55fe4 r5:20050093 r4:00000000 [60258.192058] [<8010cca4>] (show_stack) from [<809864e8>] (dump_stack+0xb0/0xdc) [60258.199301] [<80986438>] (dump_stack) from [<8016ecc8>] (__lock_acquire+0xffc/0x11d4) [60258.207144] r9:5e2bb019 r8:630f974c r7:ba8a5940 r6:ba8a5ed8 r5:815b5220 r4:80fa081c [60258.214901] [<8016dccc>] (__lock_acquire) from [<8016f620>] (lock_acquire+0x78/0x98) [60258.222655] r10:00000040 r9:00000040 r8:808729f0 r7:00000001 r6:00000000 r5:60050013 [60258.230491] r4:00000000 [60258.233045] [<8016f5a8>] (lock_acquire) from [<806ee974>] (lock_sock_nested+0x64/0x88) [60258.240970] r7:00000000 r6:b796e870 r5:00000001 r4:b796e800 [60258.246643] [<806ee910>] (lock_sock_nested) from [<808729f0>] (bt_accept_enqueue+0x3c/0x74) [60258.255004] r8:00000001 r7:ba7d3c00 r6:ba7d3ea4 r5:ba7d2000 r4:b796e800 [60258.261717] [<808729b4>] (bt_accept_enqueue) from [<808aa39c>] (l2cap_sock_new_connection_cb+0x68/0x88) [60258.271117] r5:b796e800 r4:ba7d2000 [60258.274708] [<808aa334>] (l2cap_sock_new_connection_cb) from [<808a294c>] (l2cap_connect+0x190/0x4f8) [60258.283933] r5:00000001 r4:ba6dce00 [60258.287524] [<808a27bc>] (l2cap_connect) from [<808a4a14>] (l2cap_recv_frame+0x744/0x2cf8) [60258.295800] r10:ba6dcf24 r9:00000004 r8:b78d8014 r7:00000004 r6:bb05d000 r5:00000004 [60258.303635] r4:bb05d008 [60258.306183] [<808a42d0>] (l2cap_recv_frame) from [<808a7808>] (l2cap_recv_acldata+0x210/0x214) [60258.314805] r10:b78e7800 r9:bb05d960 r8:00000001 r7:bb05d000 r6:0000000c r5:b7957a80 [60258.322641] r4:ba6dce00 [60258.325188] [<808a75f8>] (l2cap_recv_acldata) from [<8087630c>] (hci_rx_work+0x35c/0x4e8) [60258.333374] r6:80e5743c r5:bb05d7c8 r4:b7957a80 [60258.338004] [<80875fb0>] (hci_rx_work) from [<8013dc7c>] (process_one_work+0x1a4/0x4fc) [60258.346018] r10:00000001 r9:00000000 r8:baabfef8 r7:ba997500 r6:baaba800 r5:baaa5d00 [60258.353853] r4:bb05d7c8 [60258.356401] [<8013dad8>] (process_one_work) from [<8013e028>] (worker_thread+0x54/0x5cc) [60258.364503] r10:baabe038 r9:baaba834 r8:80e05900 r7:00000088 r6:baaa5d18 r5:baaba800 [60258.372338] r4:baaa5d00 [60258.374888] [<8013dfd4>] (worker_thread) from [<801448f8>] (kthread+0x134/0x160) [60258.382295] r10:ba8310b8 r9:bb07dbfc r8:8013dfd4 r7:baaa5d00 r6:00000000 r5:baaa8ac0 [60258.390130] r4:ba831080 [60258.392682] [<801447c4>] (kthread) from [<801080b4>] (ret_from_fork+0x14/0x20) [60258.399915] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801447c4 [60258.407751] r4:baaa8ac0 r3:baabe000 Signed-off-by: Philipp Puschmann <pp@emlix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3e1a127 upstream. When we disable hotplugging on the GPU, we need to be able to synchronize with each connector's hotplug interrupt handler before the interrupt is finally disabled. This can be a problem however, since nouveau_connector_detect() currently grabs a runtime power reference when handling connector probing. This will deadlock the runtime suspend handler like so: [ 861.480896] INFO: task kworker/0:2:61 blocked for more than 120 seconds. [ 861.483290] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.485158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.486332] kworker/0:2 D 0 61 2 0x80000000 [ 861.487044] Workqueue: events nouveau_display_hpd_work [nouveau] [ 861.487737] Call Trace: [ 861.488394] __schedule+0x322/0xaf0 [ 861.489070] schedule+0x33/0x90 [ 861.489744] rpm_resume+0x19c/0x850 [ 861.490392] ? finish_wait+0x90/0x90 [ 861.491068] __pm_runtime_resume+0x4e/0x90 [ 861.491753] nouveau_display_hpd_work+0x22/0x60 [nouveau] [ 861.492416] process_one_work+0x231/0x620 [ 861.493068] worker_thread+0x44/0x3a0 [ 861.493722] kthread+0x12b/0x150 [ 861.494342] ? wq_pool_ids_show+0x140/0x140 [ 861.494991] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.495648] ret_from_fork+0x3a/0x50 [ 861.496304] INFO: task kworker/6:2:320 blocked for more than 120 seconds. [ 861.496968] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.497654] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.498341] kworker/6:2 D 0 320 2 0x80000080 [ 861.499045] Workqueue: pm pm_runtime_work [ 861.499739] Call Trace: [ 861.500428] __schedule+0x322/0xaf0 [ 861.501134] ? wait_for_completion+0x104/0x190 [ 861.501851] schedule+0x33/0x90 [ 861.502564] schedule_timeout+0x3a5/0x590 [ 861.503284] ? mark_held_locks+0x58/0x80 [ 861.503988] ? _raw_spin_unlock_irq+0x2c/0x40 [ 861.504710] ? wait_for_completion+0x104/0x190 [ 861.505417] ? trace_hardirqs_on_caller+0xf4/0x190 [ 861.506136] ? wait_for_completion+0x104/0x190 [ 861.506845] wait_for_completion+0x12c/0x190 [ 861.507555] ? wake_up_q+0x80/0x80 [ 861.508268] flush_work+0x1c9/0x280 [ 861.508990] ? flush_workqueue_prep_pwqs+0x1b0/0x1b0 [ 861.509735] nvif_notify_put+0xb1/0xc0 [nouveau] [ 861.510482] nouveau_display_fini+0xbd/0x170 [nouveau] [ 861.511241] nouveau_display_suspend+0x67/0x120 [nouveau] [ 861.511969] nouveau_do_suspend+0x5e/0x2d0 [nouveau] [ 861.512715] nouveau_pmops_runtime_suspend+0x47/0xb0 [nouveau] [ 861.513435] pci_pm_runtime_suspend+0x6b/0x180 [ 861.514165] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.514897] __rpm_callback+0x7a/0x1d0 [ 861.515618] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.516313] rpm_callback+0x24/0x80 [ 861.517027] ? pci_has_legacy_pm_support+0x70/0x70 [ 861.517741] rpm_suspend+0x142/0x6b0 [ 861.518449] pm_runtime_work+0x97/0xc0 [ 861.519144] process_one_work+0x231/0x620 [ 861.519831] worker_thread+0x44/0x3a0 [ 861.520522] kthread+0x12b/0x150 [ 861.521220] ? wq_pool_ids_show+0x140/0x140 [ 861.521925] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.522622] ret_from_fork+0x3a/0x50 [ 861.523299] INFO: task kworker/6:0:1329 blocked for more than 120 seconds. [ 861.523977] Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.524644] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 861.525349] kworker/6:0 D 0 1329 2 0x80000000 [ 861.526073] Workqueue: events nvif_notify_work [nouveau] [ 861.526751] Call Trace: [ 861.527411] __schedule+0x322/0xaf0 [ 861.528089] schedule+0x33/0x90 [ 861.528758] rpm_resume+0x19c/0x850 [ 861.529399] ? finish_wait+0x90/0x90 [ 861.530073] __pm_runtime_resume+0x4e/0x90 [ 861.530798] nouveau_connector_detect+0x7e/0x510 [nouveau] [ 861.531459] ? ww_mutex_lock+0x47/0x80 [ 861.532097] ? ww_mutex_lock+0x47/0x80 [ 861.532819] ? drm_modeset_lock+0x88/0x130 [drm] [ 861.533481] drm_helper_probe_detect_ctx+0xa0/0x100 [drm_kms_helper] [ 861.534127] drm_helper_hpd_irq_event+0xa4/0x120 [drm_kms_helper] [ 861.534940] nouveau_connector_hotplug+0x98/0x120 [nouveau] [ 861.535556] nvif_notify_work+0x2d/0xb0 [nouveau] [ 861.536221] process_one_work+0x231/0x620 [ 861.536994] worker_thread+0x44/0x3a0 [ 861.537757] kthread+0x12b/0x150 [ 861.538463] ? wq_pool_ids_show+0x140/0x140 [ 861.539102] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.539815] ret_from_fork+0x3a/0x50 [ 861.540521] Showing all locks held in the system: [ 861.541696] 2 locks held by kworker/0:2/61: [ 861.542406] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543071] #1: 0000000076868126 ((work_completion)(&drm->hpd_work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.543814] 1 lock held by khungtaskd/64: [ 861.544535] #0: 0000000059db4b53 (rcu_read_lock){....}, at: debug_show_all_locks+0x23/0x185 [ 861.545160] 3 locks held by kworker/6:2/320: [ 861.545896] #0: 00000000d9e1bc59 ((wq_completion)"pm"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.546702] #1: 00000000c9f92d84 ((work_completion)(&dev->power.work)){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.547443] #2: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: nouveau_display_fini+0x96/0x170 [nouveau] [ 861.548146] 1 lock held by dmesg/983: [ 861.548889] 2 locks held by zsh/1250: [ 861.549605] #0: 00000000348e3cf6 (&tty->ldisc_sem){++++}, at: ldsem_down_read+0x37/0x40 [ 861.550393] #1: 000000007009a7a8 (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0xc1/0x870 [ 861.551122] 6 locks held by kworker/6:0/1329: [ 861.551957] #0: 000000002dbf8af5 ((wq_completion)"events"){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.552765] #1: 00000000ddb499ad ((work_completion)(&notify->work)#2){+.+.}, at: process_one_work+0x1b3/0x620 [ 861.553582] #2: 000000006e013cbe (&dev->mode_config.mutex){+.+.}, at: drm_helper_hpd_irq_event+0x6c/0x120 [drm_kms_helper] [ 861.554357] #3: 000000004afc5de1 (drm_connector_list_iter){.+.+}, at: drm_helper_hpd_irq_event+0x78/0x120 [drm_kms_helper] [ 861.555227] #4: 0000000044f294d9 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x3d/0x100 [drm_kms_helper] [ 861.556133] #5: 00000000db193642 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x4b/0x130 [drm] [ 861.557864] ============================================= [ 861.559507] NMI backtrace for cpu 2 [ 861.560363] CPU: 2 PID: 64 Comm: khungtaskd Tainted: G O 4.18.0-rc6Lyude-Test+ #1 [ 861.561197] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 861.561948] Call Trace: [ 861.562757] dump_stack+0x8e/0xd3 [ 861.563516] nmi_cpu_backtrace.cold.3+0x14/0x5a [ 861.564269] ? lapic_can_unplug_cpu.cold.27+0x42/0x42 [ 861.565029] nmi_trigger_cpumask_backtrace+0xa1/0xae [ 861.565789] arch_trigger_cpumask_backtrace+0x19/0x20 [ 861.566558] watchdog+0x316/0x580 [ 861.567355] kthread+0x12b/0x150 [ 861.568114] ? reset_hung_task_detector+0x20/0x20 [ 861.568863] ? kthread_create_worker_on_cpu+0x70/0x70 [ 861.569598] ret_from_fork+0x3a/0x50 [ 861.570370] Sending NMI from CPU 2 to CPUs 0-1,3-7: [ 861.571426] NMI backtrace for cpu 6 skipped: idling at intel_idle+0x7f/0x120 [ 861.571429] NMI backtrace for cpu 7 skipped: idling at intel_idle+0x7f/0x120 [ 861.571432] NMI backtrace for cpu 3 skipped: idling at intel_idle+0x7f/0x120 [ 861.571464] NMI backtrace for cpu 5 skipped: idling at intel_idle+0x7f/0x120 [ 861.571467] NMI backtrace for cpu 0 skipped: idling at intel_idle+0x7f/0x120 [ 861.571469] NMI backtrace for cpu 4 skipped: idling at intel_idle+0x7f/0x120 [ 861.571472] NMI backtrace for cpu 1 skipped: idling at intel_idle+0x7f/0x120 [ 861.572428] Kernel panic - not syncing: hung_task: blocked tasks So: fix this by making it so that normal hotplug handling /only/ happens so long as the GPU is currently awake without any pending runtime PM requests. In the event that a hotplug occurs while the device is suspending or resuming, we can simply defer our response until the GPU is fully runtime resumed again. Changes since v4: - Use a new trick I came up with using pm_runtime_get() instead of the hackish junk we had before Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3795214 ] Fixes the following splat during boot: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 in_atomic(): 1, irqs_disabled(): 128, pid: 77, name: kworker/2:1 4 locks held by kworker/2:1/77: #0: (ptrval) ((wq_completion)"events"){+.+.}, at: process_one_work+0x1fc/0x8fc #1: (ptrval) (deferred_probe_work){+.+.}, at: process_one_work+0x1fc/0x8fc #2: (ptrval) (&dev->mutex){....}, at: __device_attach+0x40/0x178 #3: (ptrval) (msm_iommu_lock){....}, at: msm_iommu_add_device+0x28/0xcc irq event stamp: 348 hardirqs last enabled at (347): [<c049dc18>] kfree+0xe0/0x3c0 hardirqs last disabled at (348): [<c0c35cac>] _raw_spin_lock_irqsave+0x2c/0x68 softirqs last enabled at (0): [<c0322fd8>] copy_process.part.5+0x280/0x1a68 softirqs last disabled at (0): [<00000000>] (null) Preemption disabled at: [<00000000>] (null) CPU: 2 PID: 77 Comm: kworker/2:1 Not tainted 4.17.0-rc5-wt-ath-01075-gaca0516bb4cf torvalds#239 Hardware name: Generic DT based system Workqueue: events deferred_probe_work_func [<c0314e00>] (unwind_backtrace) from [<c030fc70>] (show_stack+0x20/0x24) [<c030fc70>] (show_stack) from [<c0c16ad8>] (dump_stack+0xa0/0xcc) [<c0c16ad8>] (dump_stack) from [<c035a978>] (___might_sleep+0x1f8/0x2d4) ath10k_sdio mmc2:0001:1: Direct firmware load for ath10k/QCA9377/hw1.0/board-2.bin failed with error -2 [<c035a978>] (___might_sleep) from [<c035aac4>] (__might_sleep+0x70/0xa8) [<c035aac4>] (__might_sleep) from [<c0c3066c>] (__mutex_lock+0x50/0xb28) [<c0c3066c>] (__mutex_lock) from [<c0c31170>] (mutex_lock_nested+0x2c/0x34) ath10k_sdio mmc2:0001:1: board_file api 1 bmi_id N/A crc32 544289f [<c0c31170>] (mutex_lock_nested) from [<c052d798>] (kernfs_find_and_get_ns+0x30/0x5c) [<c052d798>] (kernfs_find_and_get_ns) from [<c0531cc8>] (sysfs_add_link_to_group+0x28/0x58) [<c0531cc8>] (sysfs_add_link_to_group) from [<c07ef75c>] (iommu_device_link+0x50/0xb4) [<c07ef75c>] (iommu_device_link) from [<c07f2288>] (msm_iommu_add_device+0xa0/0xcc) [<c07f2288>] (msm_iommu_add_device) from [<c07ec6d0>] (add_iommu_group+0x3c/0x64) [<c07ec6d0>] (add_iommu_group) from [<c07f9d40>] (bus_for_each_dev+0x84/0xc4) [<c07f9d40>] (bus_for_each_dev) from [<c07ec7c8>] (bus_set_iommu+0xd0/0x10c) [<c07ec7c8>] (bus_set_iommu) from [<c07f1a68>] (msm_iommu_probe+0x5b8/0x66c) [<c07f1a68>] (msm_iommu_probe) from [<c07feaa8>] (platform_drv_probe+0x60/0xbc) [<c07feaa8>] (platform_drv_probe) from [<c07fc1fc>] (driver_probe_device+0x30c/0x4cc) [<c07fc1fc>] (driver_probe_device) from [<c07fc59c>] (__device_attach_driver+0xac/0x14c) [<c07fc59c>] (__device_attach_driver) from [<c07f9e14>] (bus_for_each_drv+0x68/0xc8) [<c07f9e14>] (bus_for_each_drv) from [<c07fbd3c>] (__device_attach+0xe4/0x178) [<c07fbd3c>] (__device_attach) from [<c07fc698>] (device_initial_probe+0x1c/0x20) [<c07fc698>] (device_initial_probe) from [<c07faee8>] (bus_probe_device+0x98/0xa0) [<c07faee8>] (bus_probe_device) from [<c07fb4f4>] (deferred_probe_work_func+0x74/0x198) [<c07fb4f4>] (deferred_probe_work_func) from [<c0348eb4>] (process_one_work+0x2c4/0x8fc) [<c0348eb4>] (process_one_work) from [<c03497b0>] (worker_thread+0x2c4/0x5cc) [<c03497b0>] (worker_thread) from [<c0350d10>] (kthread+0x180/0x188) [<c0350d10>] (kthread) from [<c03010b4>] (ret_from_fork+0x14/0x20) Fixes: 42df43b ("iommu/msm: Make use of iommu_device_register interface") Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 018349d ] When netvsc device is removed it can call reschedule in RCU context. This happens because canceling the subchannel setup work could (in theory) cause a reschedule when manipulating the timer. To reproduce, run with lockdep enabled kernel and unbind a network device from hv_netvsc (via sysfs). [ 160.682011] WARNING: suspicious RCU usage [ 160.707466] 4.19.0-rc3-uio+ #2 Not tainted [ 160.709937] ----------------------------- [ 160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 160.723691] [ 160.723691] other info that might help us debug this: [ 160.723691] [ 160.730955] [ 160.730955] rcu_scheduler_active = 2, debug_locks = 1 [ 160.762813] 5 locks held by rebind-eth.sh/1812: [ 160.766851] #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0 [ 160.773416] #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0 [ 160.783766] #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0 [ 160.787465] #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250 [ 160.816987] #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.828629] [ 160.828629] stack backtrace: [ 160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2 [ 160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [ 160.832952] Call Trace: [ 160.832952] dump_stack+0x85/0xcb [ 160.832952] ___might_sleep+0x1a3/0x240 [ 160.832952] __flush_work+0x57/0x2e0 [ 160.832952] ? __mutex_lock+0x83/0x990 [ 160.832952] ? __kernfs_remove+0x24f/0x2e0 [ 160.832952] ? __kernfs_remove+0x1b2/0x2e0 [ 160.832952] ? mark_held_locks+0x50/0x80 [ 160.832952] ? get_work_pool+0x90/0x90 [ 160.832952] __cancel_work_timer+0x13c/0x1e0 [ 160.832952] ? netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.832952] ? __lock_is_held+0x55/0x90 [ 160.832952] netvsc_remove+0x9a/0x250 [hv_netvsc] [ 160.832952] vmbus_remove+0x26/0x30 [ 160.832952] device_release_driver_internal+0x18a/0x250 [ 160.832952] unbind_store+0xb4/0x180 [ 160.832952] kernfs_fop_write+0x113/0x1a0 [ 160.832952] __vfs_write+0x36/0x1a0 [ 160.832952] ? rcu_read_lock_sched_held+0x6b/0x80 [ 160.832952] ? rcu_sync_lockdep_assert+0x2e/0x60 [ 160.832952] ? __sb_start_write+0x141/0x1a0 [ 160.832952] ? vfs_write+0x184/0x1b0 [ 160.832952] vfs_write+0xbe/0x1b0 [ 160.832952] ksys_write+0x55/0xc0 [ 160.832952] do_syscall_64+0x60/0x1b0 [ 160.832952] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 160.832952] RIP: 0033:0x7fe48f4c8154 Resolve this by getting RTNL earlier. This is safe because the subchannel work queue does trylock on RTNL and will detect the race. Fixes: 7b2ee50 ("hv_netvsc: common detach logic") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…nux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: "We have some fixes for Tablet Mode reporting in particular, that users are complaining a lot about. Summary: - Attempt #3 of enabling Tablet Mode reporting w/o regressions - Improve battery recognition code in ASUS WMI driver - Fix Kconfig dependency warning for Fujitsu and LG laptop drivers - Add fixes in Thinkpad ACPI driver for _BCL method and NVRAM polling - Fix power supply extended topology in Mellanox driver - Fix memory leak in OLPC EC driver - Avoid static struct device in Intel PMC core driver - Add support for the touchscreen found in MPMAN Converter9 2-in-1 - Update MAINTAINERS to reflect the real state of affairs" * tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse MAINTAINERS: Add Mark Gross and Hans de Goede as x86 platform drivers maintainers platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360" platform/x86: intel_pmc_core: do not create a static struct device platform/x86: mlx-platform: Fix extended topology configuration for power supply units platform/x86: pcengines-apuv2: Fix typo on define of AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOP platform/x86: fix kconfig dependency warning for LG_LAPTOP platform/x86: thinkpad_acpi: initialize tp_nvram_state variable platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360 platform/x86: asus-wmi: Add BATC battery name to the list of supported platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA" platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1 Documentation: laptops: thinkpad-acpi: fix underline length build warning Platform: OLPC: Fix memleak in olpc_ec_probe

@offset

On setxattr() syscall path due to an apprent typo the size of a dynamically allocated memory chunk for storing struct smb2_file_full_ea_info object is computed incorrectly, to be more precise the first addend is the size of a pointer instead of the wanted object size. Coincidentally it makes no difference on 64-bit platforms, however on 32-bit targets the following memcpy() writes 4 bytes of data outside of the dynamically allocated memory. ============================================================================= BUG kmalloc-16 (Not tainted): Redzone overwritten ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201 INFO: Object 0x6f171df3 @offset=352 fp=0x00000000 Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi Redzone 79e69a6f: 73 68 32 0a sh2. Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: dump_stack+0x54/0x6e print_trailer+0x12c/0x134 check_bytes_and_report.cold+0x3e/0x69 check_object+0x18c/0x250 free_debug_processing+0xfe/0x230 __slab_free+0x1c0/0x300 kfree+0x1d3/0x220 smb2_set_ea+0x27d/0x540 cifs_xattr_set+0x57f/0x620 __vfs_setxattr+0x4e/0x60 __vfs_setxattr_noperm+0x4e/0x100 __vfs_setxattr_locked+0xae/0xd0 vfs_setxattr+0x4e/0xe0 setxattr+0x12c/0x1a0 path_setxattr+0xa4/0xc0 __ia32_sys_lsetxattr+0x1d/0x20 __do_fast_syscall_32+0x40/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 Fixes: 5517554 ("cifs: Add support for writing attributes on SMB2+") Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 linaro-swg#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 linaro-swg#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 linaro-swg#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 linaro-swg#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 linaro-swg#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 linaro-swg#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 linaro-swg#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 linaro-swg#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 linaro-swg#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 linaro-swg#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 linaro-swg#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 linaro-swg#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 linaro-swg#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 linaro-swg#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 linaro-swg#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 linaro-swg#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 linaro-swg#17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 linaro-swg#1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> linaro-swg#1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] linaro-swg#1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] linaro-swg#2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] linaro-swg#3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] linaro-swg#4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] linaro-swg#5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f linaro-swg#1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 linaro-swg#2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee linaro-swg#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 linaro-swg#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 linaro-swg#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c linaro-swg#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] linaro-swg#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] linaro-swg#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f linaro-swg#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 linaro-swg#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] linaro-swg#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc linaro-swg#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] linaro-swg#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] linaro-swg#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] linaro-swg#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] linaro-swg#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 linaro-swg#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] linaro-swg#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] linaro-swg#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 linaro-swg#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

syzbot found a potential circular dependency leading to a deadlock: -> #3 (&hdev->req_lock){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 hci_dev_do_close+0x3f/0x9f net/bluetooth/hci_core.c:551 hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935 rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345 rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274 vfs_write+0x277/0xcf5 fs/read_write.c:594 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #2 (rfkill_global_mutex){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 rfkill_register+0x30/0x7e3 net/rfkill/core.c:1045 hci_register_dev+0x48f/0x96d net/bluetooth/hci_core.c:2622 __vhci_create_device drivers/bluetooth/hci_vhci.c:341 [inline] vhci_create_device+0x3ad/0x68f drivers/bluetooth/hci_vhci.c:374 vhci_get_user drivers/bluetooth/hci_vhci.c:431 [inline] vhci_write+0x37b/0x429 drivers/bluetooth/hci_vhci.c:511 call_write_iter include/linux/fs.h:2109 [inline] new_sync_write fs/read_write.c:509 [inline] vfs_write+0xaa8/0xcf5 fs/read_write.c:596 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #1 (&data->open_mutex){+.+.}-{3:3}: __mutex_lock_common+0x1b6/0x1bc2 kernel/locking/mutex.c:599 __mutex_lock kernel/locking/mutex.c:732 [inline] mutex_lock_nested+0x17/0x1c kernel/locking/mutex.c:784 vhci_send_frame+0x68/0x9c drivers/bluetooth/hci_vhci.c:75 hci_send_frame+0x1cc/0x2ff net/bluetooth/hci_core.c:2989 hci_sched_acl_pkt net/bluetooth/hci_core.c:3498 [inline] hci_sched_acl net/bluetooth/hci_core.c:3583 [inline] hci_tx_work+0xb94/0x1a60 net/bluetooth/hci_core.c:3654 process_one_work+0x901/0xfb8 kernel/workqueue.c:2310 worker_thread+0xa67/0x1003 kernel/workqueue.c:2457 kthread+0x36a/0x430 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 -> #0 ((work_completion)(&hdev->tx_work)){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3053 [inline] check_prevs_add kernel/locking/lockdep.c:3172 [inline] validate_chain kernel/locking/lockdep.c:3787 [inline] __lock_acquire+0x2d32/0x77fa kernel/locking/lockdep.c:5011 lock_acquire+0x273/0x4d5 kernel/locking/lockdep.c:5622 __flush_work+0xee/0x19f kernel/workqueue.c:3090 hci_dev_close_sync+0x32f/0x1113 net/bluetooth/hci_sync.c:4352 hci_dev_do_close+0x47/0x9f net/bluetooth/hci_core.c:553 hci_rfkill_set_block+0x130/0x1ac net/bluetooth/hci_core.c:935 rfkill_set_block+0x1e6/0x3b8 net/rfkill/core.c:345 rfkill_fop_write+0x2d8/0x672 net/rfkill/core.c:1274 vfs_write+0x277/0xcf5 fs/read_write.c:594 ksys_write+0x19b/0x2bd fs/read_write.c:650 do_syscall_x64 arch/x86/entry/common.c:55 [inline] do_syscall_64+0x51/0xba arch/x86/entry/common.c:93 entry_SYSCALL_64_after_hwframe+0x61/0xcb This change removes the need for acquiring the open_mutex in vhci_send_frame, thus eliminating the potential deadlock while maintaining the required packet ordering. Fixes: 92d4abd ("Bluetooth: vhci: Fix race when opening vhci device") Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Calling led_trigger_register() when attaching a PHY located on an SFP module potentially (and practically) leads into a deadlock. Fix this by not calling led_trigger_register() for PHYs localted on SFP modules as such modules actually never got any LEDs. ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4-next-20231208+ #0 Tainted: G O ------------------------------------------------------ kworker/u8:2/43 is trying to acquire lock: ffffffc08108c4e8 (triggers_list_lock){++++}-{3:3}, at: led_trigger_register+0x4c/0x1a8 but task is already holding lock: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&sfp->sm_mutex){+.+.}-{3:3}: __mutex_lock+0x88/0x7a0 mutex_lock_nested+0x20/0x28 cleanup_module+0x2ae0/0x3120 [sfp] sfp_register_bus+0x5c/0x9c sfp_register_socket+0x48/0xd4 cleanup_module+0x271c/0x3120 [sfp] platform_probe+0x64/0xb8 really_probe+0x17c/0x3c0 __driver_probe_device+0x78/0x164 driver_probe_device+0x3c/0xd4 __driver_attach+0xec/0x1f0 bus_for_each_dev+0x60/0xa0 driver_attach+0x20/0x28 bus_add_driver+0x108/0x208 driver_register+0x5c/0x118 __platform_driver_register+0x24/0x2c init_module+0x28/0xa7c [sfp] do_one_initcall+0x70/0x2ec do_init_module+0x54/0x1e4 load_module+0x1b78/0x1c8c __do_sys_init_module+0x1bc/0x2cc __arm64_sys_init_module+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #2 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x88/0x7a0 mutex_lock_nested+0x20/0x28 rtnl_lock+0x18/0x20 set_device_name+0x30/0x130 netdev_trig_activate+0x13c/0x1ac led_trigger_set+0x118/0x234 led_trigger_write+0x104/0x17c sysfs_kf_bin_write+0x64/0x80 kernfs_fop_write_iter+0x128/0x1b4 vfs_write+0x178/0x2a4 ksys_write+0x58/0xd4 __arm64_sys_write+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #1 (&led_cdev->trigger_lock){++++}-{3:3}: down_write+0x4c/0x13c led_trigger_write+0xf8/0x17c sysfs_kf_bin_write+0x64/0x80 kernfs_fop_write_iter+0x128/0x1b4 vfs_write+0x178/0x2a4 ksys_write+0x58/0xd4 __arm64_sys_write+0x18/0x20 invoke_syscall.constprop.0+0x4c/0xdc do_el0_svc+0x3c/0xbc el0_svc+0x34/0x80 el0t_64_sync_handler+0xf8/0x124 el0t_64_sync+0x150/0x154 -> #0 (triggers_list_lock){++++}-{3:3}: __lock_acquire+0x12a0/0x2014 lock_acquire+0x100/0x2ac down_write+0x4c/0x13c led_trigger_register+0x4c/0x1a8 phy_led_triggers_register+0x9c/0x214 phy_attach_direct+0x154/0x36c phylink_attach_phy+0x30/0x60 phylink_sfp_connect_phy+0x140/0x510 sfp_add_phy+0x34/0x50 init_module+0x15c/0xa7c [sfp] cleanup_module+0x1d94/0x3120 [sfp] cleanup_module+0x2bb4/0x3120 [sfp] process_one_work+0x1f8/0x4ec worker_thread+0x1e8/0x3d8 kthread+0x104/0x110 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: triggers_list_lock --> rtnl_mutex --> &sfp->sm_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sfp->sm_mutex); lock(rtnl_mutex); lock(&sfp->sm_mutex); lock(triggers_list_lock); *** DEADLOCK *** 4 locks held by kworker/u8:2/43: #0: ffffff80c000f938 ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec #1: ffffffc08214bde8 ((work_completion)(&(&sfp->timeout)->work)){+.+.}-{0:0}, at: process_one_work+0x150/0x4ec #2: ffffffc0810902f8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x18/0x20 #3: ffffff80c5c6f318 (&sfp->sm_mutex){+.+.}-{3:3}, at: cleanup_module+0x2ba8/0x3120 [sfp] stack backtrace: CPU: 0 PID: 43 Comm: kworker/u8:2 Tainted: G O 6.7.0-rc4-next-20231208+ #0 Hardware name: Bananapi BPI-R4 (DT) Workqueue: events_power_efficient cleanup_module [sfp] Call trace: dump_backtrace+0xa8/0x10c show_stack+0x14/0x1c dump_stack_lvl+0x5c/0xa0 dump_stack+0x14/0x1c print_circular_bug+0x328/0x430 check_noncircular+0x124/0x134 __lock_acquire+0x12a0/0x2014 lock_acquire+0x100/0x2ac down_write+0x4c/0x13c led_trigger_register+0x4c/0x1a8 phy_led_triggers_register+0x9c/0x214 phy_attach_direct+0x154/0x36c phylink_attach_phy+0x30/0x60 phylink_sfp_connect_phy+0x140/0x510 sfp_add_phy+0x34/0x50 init_module+0x15c/0xa7c [sfp] cleanup_module+0x1d94/0x3120 [sfp] cleanup_module+0x2bb4/0x3120 [sfp] process_one_work+0x1f8/0x4ec worker_thread+0x1e8/0x3d8 kthread+0x104/0x110 ret_from_fork+0x10/0x20 Signed-off-by: Daniel Golle <daniel@makrotopia.org> Fixes: 01e5b72 ("net: phy: Add a binding for PHY LEDs") Link: https://lore.kernel.org/r/102a9dce38bdf00215735d04cd4704458273ad9c.1702339354.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ torvalds#532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ torvalds#532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

For rq, we have three cases getting buffers from virtio core: 1. virtqueue_get_buf{,_ctx} 2. virtqueue_detach_unused_buf 3. callback for virtqueue_resize But in commit 295525e("virtio_net: merge dma operations when filling mergeable buffers"), I missed the dma unmap for the #3 case. That will leak some memory, because I did not release the pages referred by the unused buffers. If we do such script, we will make the system OOM. while true do ethtool -G ens4 rx 128 ethtool -G ens4 rx 256 free -m done Fixes: 295525e ("virtio_net: merge dma operations when filling mergeable buffers") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20231226094333.47740-1-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

jbech-linaro added 2 commits April 1, 2016 15:25

arm64: dt: Add OP-TEE firmware to mt8173 **not for mainline**

6935841

Signed-off-by: Joakim Bech <joakim.bech@linaro.org> Reviewed-by: Pascal Brand <pascal.brand@linaro.org>

jbech-linaro force-pushed the mtk_2_0_0_release branch from 4d30f17 to 84c7fe3 Compare April 1, 2016 13:26

jbech-linaro mentioned this pull request Apr 1, 2016

mt8173: update for the generic driver OP-TEE/manifest#23

Merged

ghost merged commit 84c7fe3 into linaro-swg:optee Apr 1, 2016

jforissier mentioned this pull request May 10, 2017

arm64: dts: hi6220: Reset the mmc hosts #43

Merged

This pull request was closed.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

MT8173-EVB: Changes to support the new generic driver #3

MT8173-EVB: Changes to support the new generic driver #3

jbech-linaro commented Apr 1, 2016

pascal-brand38 commented Apr 1, 2016

jbech-linaro commented Apr 1, 2016

MT8173-EVB: Changes to support the new generic driver #3

MT8173-EVB: Changes to support the new generic driver #3

Conversation

jbech-linaro commented Apr 1, 2016

pascal-brand38 commented Apr 1, 2016

jbech-linaro commented Apr 1, 2016