Skip to content

Releases

FlightCore OSX 1.3.0

Choose a tag to compare

@lydianb79 lydianb79 released this 15 Nov 16:15

A big release: 175 aircraft, 20 3D sites, 30 photo sites, menu music, and sound that belongs to the place.

Main menu

Aircraft browser Flying at a photo site

New

  • 75 more aircraft, 175 in all: 50 more airplanes, flying wings, tailless jets (Horten Ho 229, B-2 Spirit, Avro Vulcan, Mirage III, Me 163 Komet), and more helicopters and multirotors. The aircraft browser shows what powers each one: brushless motor, electric ducted fan, piston engine or turboprop.
  • 7 more 3D sites, 20 in all: Autumn Valley, Lava Fields, Fjord, Wetlands, Sea Cliffs, Salt Flats and Sand Sea.
  • Photo sites: thirty 360° photo sites as a separate download. Hillside photos have sloping ground. Trees and buildings are solid where they are actually visible in the photo, so gaps between crowns and the sky beside a treetop are open. FlightCore can be pointed at any folder of photos.
  • Weather: presets from Calm to Stormy, gusts and lulls, thermal strength, cloud cover, haze, six times of day on 3D sites and a light grade on photo sites.
  • Menu music from the splash screen through the menus, fading out on take-off. It can be turned off in the main menu.
  • Sound: touchdowns that match the surface, ambience for every site (birds, crickets, surf, wind, cowbells and more), a reworked piston engine, engines that follow the throttle at once and stop after a crash, and leaves and snapping twigs when you fly into a tree.
  • Pitch trim on -, = and 0, remembered for each aircraft.
  • Controller setup: any keyboard action can be assigned to a transmitter switch or button, and every aircraft has its own low rate and expo. Flights start on low rates.
  • Helicopters have Stabilized and Acro modes, three rotor speeds, vortex ring state and inverted flight; multirotors have a reworked mixer and propwash.
  • Interface: the app opens in about a second with an animated splash; Select buttons return to the main menu; the browsers remember the last filter; Weather and Controls opened from the menu no longer start the flight; the mouse pointer hides when idle.

Flight model

  • Balance corrected: models are no longer nose-heavy, and they fly slower hands-off, so approaches need only light up elevator
  • Gentle, model-like stalls; control rates calibrated per category
  • Trim and full-elevator response corrected
  • Hovering fixed: propeller blast per surface, working control surfaces at high angles, and correct tail downwash
  • Built-up models have motor right and down thrust; flat foam planes have a straight thrust line

Install

  1. Download the app below and unzip it: FlightCore-OSX-1.3.0-arm64.zip for Apple silicon Macs (M1 and later), or FlightCore-OSX-1.3.0-x86_64.zip for Intel Macs.
  2. Move FlightCore.app to your Applications folder.
  3. The app is not signed with an Apple developer certificate or notarised, so macOS blocks it the first time. Right-click the app and choose Open, or allow it under System Settings ▸ Privacy & Security, or run:
xattr -dr com.apple.quarantine /Applications/FlightCore.app

Requires macOS 13 or later. The Intel build has been tested under Rosetta, not on Intel hardware.

Photo sites (optional)

The thirty photo sites are a separate download, so the app stays small (4 MB).

  1. Download FlightCore-Panoramas.zip below (1.3 GB) and unzip it. Keep the folder wherever you like; it does not need to be next to the app.
  2. Start FlightCore and choose Flying Site ▸ Choose Panoramas Folder…, or click Photo Folder… in the site browser, and pick the unzipped folder.

The photo sites appear at once under Photo Sites, and the folder is remembered. The photos are CC0 panoramas from Poly Haven, included unchanged.

Known limits

  • The flight physics has been checked by automated tests, not yet tuned by hand-flying
  • Obstacle distances on photo sites are estimated from the photos
  • The ground of a photo site is one level or tilted plane, so gullies and valleys in a photo are not followed
  • Scale models are simplified shapes, and aircraft figures are approximate
  • No multiplayer, VR, flight recording, or aircraft and airport editors

FlightCore OSX 1.2.0

Choose a tag to compare

@lydianb79 lydianb79 released this 15 Nov 02:49

A visual release: every aircraft has more detail, and there are now 100 of them.

New

  • Pilatus PC-12, a single-turboprop T-tail business aircraft, is aircraft number 100.
  • Civil aircraft (the Cessnas, Pipers, Pilatus types, Twin Otter, King Air and floatplanes) have a windscreen and cabin windows, a fuselage stripe that was previously missing because of a bug, an anti-glare panel, pinstripes, and de-icing boots on the turboprops.
  • All airplanes have control horns with pushrods and aileron servos, canopy frames, a pitot tube, a fin beacon, and gear doors on retractable legs.
  • Radial-engined types have an open cowl with the cylinders visible; inline warbirds have exhaust stacks and staining.
  • Paint detail by type: identification strips and fuselage bands on camouflaged warbirds, anti-glare panels and stripes on silver ones, radomes and jet pipes on jets, extra checkers and stripes on aerobats, gliders, sport and foam models, and visible wing ribs on fabric-covered types.
  • Helicopters and quadcopters have lights, boom bands, canopy vents, a GPS puck and other fittings.

There are no physics changes since 1.1.0.

Install

  1. Download FlightCore-OSX.zip below and unzip it.
  2. Move FlightCore.app to your Applications folder.
  3. The app is not signed with an Apple developer certificate or notarised, so macOS blocks it the first time. Right-click the app and choose Open, or allow it under System Settings ▸ Privacy & Security, or run:
xattr -dr com.apple.quarantine /Applications/FlightCore.app

Requires an Apple silicon Mac running macOS 13 or later.

Known limits

  • The flight physics has been checked by automated tests, not yet tuned by hand-flying
  • Scale models are simplified shapes, and aircraft figures are approximate
  • No multiplayer, VR, flight recording, or aircraft and airport editors
  • Photo-site panoramas are not included

FlightCore OSX 1.1.0

Choose a tag to compare

@lydianb79 lydianb79 released this 14 Nov 12:05

A physics release: the flight, ground and weather models are rebuilt, with nine new aircraft.

New

  • Propulsion: electric motor and battery model. The battery sags under load and drains with use (Simulation ▸ Unlimited Battery turns that off). Torque reaction, P-factor, spiral slipstream and gyroscopic effects mean single-engine aircraft swing on take-off and need rudder.
  • Stall and spin: six panels per half wing with local chord, washout and loading; stall lag and hysteresis; tail downwash that collapses at the stall. Wing drops, spins and recovery follow from the geometry.
  • Per-aircraft data: the models of real types are shaped from approximate figures for the full-size aircraft (aspect ratio, taper, length, wing loading, power loading), with wing-section families, computed centre of gravity and inertia.
  • Ground effect, and flaps that change the trim.
  • Helicopters: vortex ring state, blade flapping, retreating-blade stall, tail-rotor authority loss.
  • Ground handling: slip-angle tyres, surface-dependent grip and rolling resistance, wheel brakes (Q or left trigger).
  • Floatplanes: Beaver, Super Cub and Twin Otter on floats, starting on the water at sites that have it.
  • Wings: a new category of six flying wings with elevons, from a 60 cm racer to a 2.1 m long-range wing and a Horten Ho 229.
  • Air: boundary-layer wind profile, random-gust turbulence, wakes behind trees and buildings, thermals that drift and cycle.
  • Fixes: RC transmitters that identify as gamepads (DJI and others) are detected; motion is even from frame to frame; photo-site badges are readable.

99 aircraft in total. The app is now licensed under the GPL, version 3.

Install

  1. Download FlightCore-OSX.zip below and unzip it.
  2. Move FlightCore.app to your Applications folder.
  3. The app is not signed with an Apple developer certificate or notarised, so macOS blocks it the first time. Right-click the app and choose Open, or allow it under System Settings ▸ Privacy & Security, or run:
xattr -dr com.apple.quarantine /Applications/FlightCore.app

Requires an Apple silicon Mac running macOS 13 or later.

Known limits

  • The new physics has been checked by automated tests, not yet tuned by hand-flying; take-off swing and spin behaviour may need adjusting
  • Aircraft figures are approximate, and scale models are simplified shapes
  • No multiplayer, VR, flight recording, or aircraft and airport editors
  • Photo-site panoramas are not included

FlightCore OSX 1.0.0

Choose a tag to compare

@lydianb79 lydianb79 released this 14 Nov 10:06

First public release of FlightCore OSX, a radio-control line-of-sight flight simulator for macOS.

What's in it

  • 90 aircraft: trainers, scale civil types, warbirds, aerobats, flat-foam 3D planes, jets, gliders, helicopters and multirotors, each with its own flight model
  • 13 3D flying sites: fields, an airport, mountains, coast, lake, island, desert, canyon, savanna and snow
  • 360° photo sites: use any equirectangular panorama as a flying site; presets are built in for fifteen Poly Haven panoramas (not included)
  • Controllers: USB RC transmitters, gamepads and keyboard, with calibration, stick modes, rates and expo
  • Rendering: Metal, HDR, soft shadows, ambient occlusion, bloom
  • Sound: synthesized stereo engines, rotors, ambience and crashes

Install

  1. Download FlightCore-OSX.zip below and unzip it.
  2. Move FlightCore.app to your Applications folder.
  3. The app is not signed with an Apple developer certificate or notarised, so macOS blocks it the first time. Right-click the app and choose Open, or allow it under System Settings ▸ Privacy & Security, or run:
xattr -dr com.apple.quarantine /Applications/FlightCore.app

Requires an Apple silicon Mac running macOS 13 or later.

Known limits

  • No multiplayer, VR, flight recording, or aircraft and airport editors
  • Scale models are approximations of the real aircraft
  • Photo sites have flat ground and the model is never hidden behind photographed objects