Repository navigation
Releases
v1.2.2
Changes
Bug Fixes
Maintenance
Pin a version:
external_components:
- source:
type: git
url: https://github.com/makstech/esphome-BusT4
ref: v1 # newest compatible release
components: [bus_t4]v1.2.1
Changes
Bug Fixes
Maintenance
Pin a version:
external_components:
- source:
type: git
url: https://github.com/makstech/esphome-BusT4
ref: v1 # newest compatible release
components: [bus_t4]v1.2.0
Changes
Features
Documentation
Maintenance
Pin a version:
external_components:
- source:
type: git
url: https://github.com/makstech/esphome-BusT4
ref: v1 # newest compatible release
components: [bus_t4]v1.1.0
Changes
Bug Fixes
Maintenance
- ci: resolve the release version from a required semver label @makstech (#27)
- chore(deps): bump actions/checkout from 6 to 7 @dependabot (#21)
- chore(deps): bump actions/setup-python from 6 to 7 @dependabot (#25)
Notes
Discovery now identifies the control unit by the device type it reports rather than the address it answers from, which fixes an OXI receiver at endpoint 0x03 being used as the motor target (#16). Position payloads are decoded by their declared width, so dual-encoder controllers such as the MC824H no longer read the encoder selector as the high byte of the position (#17).
New cover options: force_estimated_position for controllers reporting a position that never changes (#22), and controller_address to pin the control unit and skip discovery.
Verified on a Nice ROBO600, and on a Hyke HK7024 (MC824H) by @fastm3, who reports correct position and state. The Walky and multi-device paths are reasoned from captures and the pruwait/gashtaan implementations, not tested on hardware — reports welcome.
Credits
Nearly all of this release comes from @yawor, who reported #16, #17 and #19, worked out the dual-encoder payload layout in #18, and supplied the captures it was built from. @fastm3 reported #22 and tested the proposed fix, which is what showed his controller needed a different answer.
Pin a version:
external_components:
- source:
type: git
url: https://github.com/makstech/esphome-BusT4
ref: v1 # newest compatible release
components: [bus_t4]v1.0.0
First tagged release, marking the state that had been running unchanged for months before the discovery and position-decoding rework.
Bidirectional Bus-T4 communication with status reporting, position tracking with auto-learned timing persisted to flash, Robus and Walky handling, security commands and raw config parameters.
Verified on a Nice ROBO600. Pin this tag if you want a build that will never move:
external_components:
- source:
type: git
url: https://github.com/makstech/esphome-BusT4
ref: v1.0.0
refresh: never
components: [bus_t4]