Skip to content

v1.1

Choose a tag to compare

@manfredi90 manfredi90 released this 04 Nov 18:28
· 35 commits to downscaler since this release
42ab219

New

  • 1080p input (60Hz), 240p and 480i output, 4 input lines per output line:
    • Full 16:9: the 1708x960 center window (~89% of the picture, like a TV's overscan), squeezed to 4:3
    • Center 4:3: the 1280x960 center window
  • 480i input → 240p (menu "480i input"): 480i sources can be shown as 240p, with both fields on the same scanlines (no interlacing). Passthrough stays the default.
  • 480i flicker filter (menu "480i filter", Off / 1–4): for 480p and 640x480 sources with 480i output, each field line is mixed with the lines above and below (weights a, 1-2a, a; level 4 = 1/4, 1/2, 1/4), as in the flicker filter of professional scan converters.
  • Component input (YPbPr) verified.

Changes and fixes

  • Wide (180p): fixed the sampling phase (it sampled on the pixel edges, causing shimmer on motion).
  • Output line rate limits narrowed to 14.8–16.0kHz (computed modes stay within 15.6–15.9kHz), hardware watchdog threshold lowered to 16.4kHz.

Installation

  1. Copy ossc_ds_v1.1.bin to a micro SD card.
  2. Install it from the official firmware's firmware update function (it is written to the secondary slot only).
  3. Start it with Launch 2nd FW, then select the input with the remote.
    Power cycle the OSSC to return to the official firmware. Settings saved with v1.0 are kept.